Why do LEDs generate heat?

  • Thread starter Commander Kinsey
  • Start date
"Mark Lloyd" <not@mail.invalid> wrote in message
news:Rx5mF.17840$JD1.8167@fx11.iad...
On 10/4/19 2:51 PM, Commander Kinsey wrote:

I have a LED

That irritates me, why don't you write "an LED"? How do you say "LED"?
I say "Ell Eee Dee", not "Light Emitting Diode". So it needs an "an",
not an "a".

"an LED" irritates me. I know the word is "light".

I think it is normal convention that an initialism that starts with a *vowel
sound* takes "an", on the grounds of euphony: that in normal English, you
never precede a word that starts with a vowel sound with "a".

Hence an apple, but a uniform. A hedge or a hotel or a historic event but an
honourable occasion (H is sounded for the first three but silent for the
last one). For some reason, it considered "better" to use "an" before hotel
and historic, even though the H is sounded. That sounds as daft to my ears
as "an spoon" - it's not a vowel sound so you use "a". I could understand if
people pronounce hotel the French way, but it needs to be consistent: "an
'otel" or "a hotel".


As regards initialisms/abbreviations, you do get anomalies like "an LED"
(ell-ee-dee) that starts with a consonant but "a UFO" (you-eff-oh) that
starts with a vowel pronounced as a consonant.
 
"Commander Kinsey" <CFKinsey@military.org.jp> wrote in message
news:eek:p.z87a1eyjwdg98l@picard.lan...
On Sat, 05 Oct 2019 19:46:08 +0100, Mark Lloyd <not@mail.invalid> wrote:

On 10/4/19 2:51 PM, Commander Kinsey wrote:
bulb (60W equivalent) in a lamp here.

60W? Are you a Klingon and love darkness? I use 100W and 150W bulbs
only. And lots of them. My living room (7 metres by 4 metres) contains
13 90W bulbs.

It also matters if the light source is in the right place, like from
behind is good if you're reading or watching TV.

I prefer the whole room to be evenly lit.

Some people think more light is always better. I remember working behind
a TV (26-inch CRT console), where I could see OK. Then someone, trying
to be helpful, turned on a nearby wall lamp. The effect of that is that
the area behind the TV became completely BLACK.

More light is better if the whole room is lit evenly. Which is why I
prefer strip lights to point sources. Much better if you're soldering for
example, you don't create shadows, as light can come to the workpiece from
all angles, no matter where your body/head/hands/tools are.

Exactly. It is the use that you are making of the light which governs
whether you want a point source and directional lighting, or a diffuse
light.

I prefer to read with a light over my shoulder to light the pages of the
book, but with the rest of the room dark enough than I'm not distracted by
everything else around the book. Likewise for watching TV - screen brighter
than ambient light, even if the ambient light isn't reducing screen contrast
by brightening the dark parts of it.


My wife prefers uniform lighting - even if that means you are looking into
the light. When reading in bed, she will turn on the overhead light (single
ceiling rose or lots of GU10 spotlights) which illuminate the rest of the
room and shine right in your face, but leave the pages of the book in
shadow, She believes that reading by over-the-shoulder light, with the book
brighter than the background, strains your eyes.
 
On Sat, 5 Oct 2019 20:33:14 +0100, NY, the notorious, troll-feeding,
endlessly blathering senile idiot, blathered again:



> My wife prefers uniform lighting

You got a "wife", troll-feeding senile idiot? Does she know about you
sucking troll cock on Usenet on every occasion? <BG>
 
On Sat, 05 Oct 2019 20:23:02 +0100, NY <me@privacy.invalid> wrote:

"Mark Lloyd" <not@mail.invalid> wrote in message
news:Rx5mF.17840$JD1.8167@fx11.iad...
On 10/4/19 2:51 PM, Commander Kinsey wrote:

I have a LED

That irritates me, why don't you write "an LED"? How do you say "LED"?
I say "Ell Eee Dee", not "Light Emitting Diode". So it needs an "an",
not an "a".

"an LED" irritates me. I know the word is "light".

I think it is normal convention that an initialism that starts with a *vowel
sound* takes "an", on the grounds of euphony: that in normal English, you
never precede a word that starts with a vowel sound with "a".

Hence an apple, but a uniform. A hedge or a hotel or a historic event but an
honourable occasion (H is sounded for the first three but silent for the
last one). For some reason, it considered "better" to use "an" before hotel
and historic, even though the H is sounded. That sounds as daft to my ears
as "an spoon" - it's not a vowel sound so you use "a". I could understand if
people pronounce hotel the French way, but it needs to be consistent: "an
'otel" or "a hotel".

My god! I agree with you completely. I was about to say the same thing as soon as you wrote "a historic event", it's really grating to my ears to hear an historic.

Also, Americans get the Hs wrong. Like erb, as in marijuana. An 'erb would be fine, but they think the H is always silent.

As regards initialisms/abbreviations, you do get anomalies like "an LED"
(ell-ee-dee) that starts with a consonant but "a UFO" (you-eff-oh) that
starts with a vowel pronounced as a consonant.

I say "a URL" for a web address, but I knew someone who said "an url", as in how you would pronounce "hurl" with a silent H. He insisted that acronyms should be pronounced like words. WLED became "well-ed", as in "well" followed by the name "Ed". I assume because pronouncing a W before an L was too difficult, so he then added extra vowels.
 
On Sat, 05 Oct 2019 20:33:14 +0100, NY <me@privacy.invalid> wrote:

"Commander Kinsey" <CFKinsey@military.org.jp> wrote in message
news:eek:p.z87a1eyjwdg98l@picard.lan...
On Sat, 05 Oct 2019 19:46:08 +0100, Mark Lloyd <not@mail.invalid> wrote:

On 10/4/19 2:51 PM, Commander Kinsey wrote:
bulb (60W equivalent) in a lamp here.

60W? Are you a Klingon and love darkness? I use 100W and 150W bulbs
only. And lots of them. My living room (7 metres by 4 metres) contains
13 90W bulbs.

It also matters if the light source is in the right place, like from
behind is good if you're reading or watching TV.

I prefer the whole room to be evenly lit.

Some people think more light is always better. I remember working behind
a TV (26-inch CRT console), where I could see OK. Then someone, trying
to be helpful, turned on a nearby wall lamp. The effect of that is that
the area behind the TV became completely BLACK.

More light is better if the whole room is lit evenly. Which is why I
prefer strip lights to point sources. Much better if you're soldering for
example, you don't create shadows, as light can come to the workpiece from
all angles, no matter where your body/head/hands/tools are.


Exactly. It is the use that you are making of the light which governs
whether you want a point source and directional lighting, or a diffuse
light.

I prefer to read with a light over my shoulder to light the pages of the
book, but with the rest of the room dark enough than I'm not distracted by
everything else around the book. Likewise for watching TV - screen brighter
than ambient light, even if the ambient light isn't reducing screen contrast
by brightening the dark parts of it.

I always like everything lit in the room, or I doze off.

My wife prefers uniform lighting - even if that means you are looking into
the light. When reading in bed, she will turn on the overhead light (single
ceiling rose or lots of GU10 spotlights) which illuminate the rest of the
room and shine right in your face, but leave the pages of the book in
shadow, She believes that reading by over-the-shoulder light, with the book
brighter than the background, strains your eyes.

That may be true, and why I feel sleepy if I do so. But then some people read to get to sleep.
 
On 2019-10-05 12:48 p.m., Commander Kinsey wrote:
On Sat, 05 Oct 2019 20:33:14 +0100, NY <me@privacy.invalid> wrote:

"Commander Kinsey" <CFKinsey@military.org.jp> wrote in message
news:eek:p.z87a1eyjwdg98l@picard.lan...
On Sat, 05 Oct 2019 19:46:08 +0100, Mark Lloyd <not@mail.invalid> wrote:

On 10/4/19 2:51 PM, Commander Kinsey wrote:
bulb (60W equivalent) in a lamp here.

60W?  Are you a Klingon and love darkness?  I use 100W and 150W bulbs
only.  And lots of them.  My living room (7 metres by 4 metres)
contains
13 90W bulbs.

It also matters if the light source is in the right place, like from
behind is good if you're reading or watching TV.

I prefer the whole room to be evenly lit.

Some people think more light is always better. I remember working
behind
a TV (26-inch CRT console), where I could see OK. Then someone, trying
to be helpful, turned on a nearby wall lamp. The effect of that is that
the area behind the TV became completely BLACK.

More light is better if the whole room is lit evenly.  Which is why I
prefer strip lights to point sources.  Much better if you're
soldering for
example, you don't create shadows, as light can come to the workpiece
from
all angles, no matter where your body/head/hands/tools are.


Exactly. It is the use that you are making of the light which governs
whether you want a point source and directional lighting, or a diffuse
light.

I prefer to read with a light over my shoulder to light the pages of the
book, but with the rest of the room dark enough than I'm not
distracted by
everything else around the book. Likewise for watching TV - screen
brighter
than ambient light, even if the ambient light isn't reducing screen
contrast
by brightening the dark parts of it.

I always like everything lit in the room, or I doze off.

My wife prefers uniform lighting - even if that means you are looking
into
the light. When reading in bed, she will turn on the overhead light
(single
ceiling rose or lots of GU10 spotlights) which illuminate the rest of the
room and shine right in your face, but leave the pages of the book in
shadow, She believes that reading by over-the-shoulder light, with the
book
brighter than the background, strains your eyes.

That may be true, and why I feel sleepy if I do so.  But then some
people read to get to sleep.

i have sex to fall asleep and i don't care what the lights are doing
 
On 05/10/2019 19:46, Mark Lloyd wrote:
On 10/4/19 2:51 PM, Commander Kinsey wrote:

[snip]

I have a LED

That irritates me, why don't you write "an LED"?  How do you say
"LED"? I say "Ell Eee Dee", not "Light Emitting Diode".  So it needs
an "an", not an "a".

"an LED" irritates me. I know the word is "light".

It's "a LED" if you pronounce it as an acronym.

--
Max Demian
 
On Sat, 05 Oct 2019 23:08:43 +0100, Max Demian <max_demian@bigfoot.com> wrote:

On 05/10/2019 19:46, Mark Lloyd wrote:
On 10/4/19 2:51 PM, Commander Kinsey wrote:

[snip]

I have a LED

That irritates me, why don't you write "an LED"? How do you say
"LED"? I say "Ell Eee Dee", not "Light Emitting Diode". So it needs
an "an", not an "a".

"an LED" irritates me. I know the word is "light".

It's "a LED" if you pronounce it as an acronym.

What do you mean by "pronounce it as an acronym"? I would have said that means "ell eee dee" as in you're treating it as an acronym rather than a word and spelling it out.
 
On 06/10/2019 00:14, Commander Kinsey wrote:
On Sat, 05 Oct 2019 23:08:43 +0100, Max Demian <max_demian@bigfoot.com
wrote:

On 05/10/2019 19:46, Mark Lloyd wrote:
On 10/4/19 2:51 PM, Commander Kinsey wrote:

[snip]

I have a LED

That irritates me, why don't you write "an LED"?  How do you say
"LED"? I say "Ell Eee Dee", not "Light Emitting Diode".  So it needs
an "an", not an "a".

"an LED" irritates me. I know the word is "light".

It's "a LED" if you pronounce it as an acronym.

What do you mean by "pronounce it as an acronym"?  I would have said
that means "ell eee dee" as in you're treating it as an acronym rather
than a word and spelling it out.

An acronym is a pronounceable abbreviation, e.g. NATO, scuba, radar.

--
Max Demian
 
On Sun, 6 Oct 2019 10:07:15 +0100, Max Dumb, another mentally deficient
inveterate troll-feeding senile idiot, blathered again:


What do you mean by "pronounce it as an acronym"?  I would have said
that means "ell eee dee" as in you're treating it as an acronym rather
than a word and spelling it out.

An acronym is a pronounceable abbreviation, e.g. NATO, scuba, radar.

LOL Oh, no, another bullshit "conversation" ensuing!
 
On 10/5/19 1:59 PM, Commander Kinsey wrote:

[snip]

More light is better if the whole room is lit evenly.  Which is why I
prefer strip lights to point sources.  Much better if you're soldering
for example, you don't create shadows, as light can come to the
workpiece from all angles, no matter where your body/head/hands/tools are.

In the case I described, the lamp (a "helpful" person tuned on) was to
my side, almost the same direction as the back of the TV.

--
80 days until the winter celebration (Wed, Dec 25, 2019 12:00:00 AM for
1 day).

Mark Lloyd
http://notstupid.us/

If a member of McDonalds' staff was God:

"OK, one Universe. Uh, you want
fries with that?"
 
On 10/5/19 2:33 PM, NY wrote:

[snip]

My wife prefers uniform lighting - even if that means you are looking
into the light. When reading in bed, she will turn on the overhead light
(single ceiling rose or lots of GU10 spotlights) which illuminate the
rest of the room and shine right in your face, but leave the pages of
the book in shadow, She believes that reading by over-the-shoulder
light, with the book brighter than the background, strains your eyes.

Over-the-shoulder light would be a lot better than black letters on a
very dark gray background (because your eyes are adapted to the bright
light coming around the edges of the book).

--
80 days until the winter celebration (Wed, Dec 25, 2019 12:00:00 AM for
1 day).

Mark Lloyd
http://notstupid.us/

If a member of McDonalds' staff was God:

"OK, one Universe. Uh, you want
fries with that?"
 
On Sun, 6 Oct 2019 12:57:57 -0500, Mark Lloyd, another absolutely brain
dead, troll-feeding, senile cretin, drivelled:


Over-the-shoulder light would be a lot better than black letters on a
very dark gray background

It would still be a LOT better if you just shut your stupid senile gob, you
notorious, troll-feeding senile asshole!
 
On Sun, 6 Oct 2019 12:54:27 -0500, Mark Lloyd, another absolutely brain
dead, troll-feeding, senile cretin, drivelled:


In the case I described, the lamp (a "helpful" person tuned on) was to
my side, almost the same direction as the back of the TV.

It's rather obvious now, a troll-feeding senile idiot is as much of a
driveling mentally deficient idiot as the troll he keeps feeding!
 
On Sun, 06 Oct 2019 10:07:15 +0100, Max Demian <max_demian@bigfoot.com> wrote:

On 06/10/2019 00:14, Commander Kinsey wrote:
On Sat, 05 Oct 2019 23:08:43 +0100, Max Demian <max_demian@bigfoot.com
wrote:

On 05/10/2019 19:46, Mark Lloyd wrote:
On 10/4/19 2:51 PM, Commander Kinsey wrote:

[snip]

I have a LED

That irritates me, why don't you write "an LED"? How do you say
"LED"? I say "Ell Eee Dee", not "Light Emitting Diode". So it needs
an "an", not an "a".

"an LED" irritates me. I know the word is "light".

It's "a LED" if you pronounce it as an acronym.

What do you mean by "pronounce it as an acronym"? I would have said
that means "ell eee dee" as in you're treating it as an acronym rather
than a word and spelling it out.

An acronym is a pronounceable abbreviation, e.g. NATO, scuba, radar.

Ah, I always say acronym to mean abbreviation. I don't care if it's technically wrong :)
 
Commander Kinsey wrote:
On Sun, 06 Oct 2019 10:07:15 +0100, Max Demian
max_demian@bigfoot.com> wrote:
On 06/10/2019 00:14, Commander Kinsey wrote:
On Sat, 05 Oct 2019 23:08:43 +0100, Max Demian
max_demian@bigfoot.com> wrote:

On 05/10/2019 19:46, Mark Lloyd wrote:
On 10/4/19 2:51 PM, Commander Kinsey wrote:

[snip]

I have a LED

That irritates me, why don't you write "an LED"? How do you say
"LED"? I say "Ell Eee Dee", not "Light Emitting Diode". So it
needs an "an", not an "a".

"an LED" irritates me. I know the word is "light".

It's "a LED" if you pronounce it as an acronym.

What do you mean by "pronounce it as an acronym"? I would have said
that means "ell eee dee" as in you're treating it as an acronym
rather than a word and spelling it out.

An acronym is a pronounceable abbreviation, e.g. NATO, scuba, radar.

Ah, I always say acronym to mean abbreviation. I don't care if it's
technically wrong :)

Top notch troll phucker. Well done. Now why you just fuck off and die?
 
On Mon, 07 Oct 2019 19:33:19 +0100, Mr Pounder Esquire <MrPounder@rationalthought.com> wrote:

Commander Kinsey wrote:
On Sun, 06 Oct 2019 10:07:15 +0100, Max Demian
max_demian@bigfoot.com> wrote:
On 06/10/2019 00:14, Commander Kinsey wrote:
On Sat, 05 Oct 2019 23:08:43 +0100, Max Demian
max_demian@bigfoot.com> wrote:

On 05/10/2019 19:46, Mark Lloyd wrote:
On 10/4/19 2:51 PM, Commander Kinsey wrote:

[snip]

I have a LED

That irritates me, why don't you write "an LED"? How do you say
"LED"? I say "Ell Eee Dee", not "Light Emitting Diode". So it
needs an "an", not an "a".

"an LED" irritates me. I know the word is "light".

It's "a LED" if you pronounce it as an acronym.

What do you mean by "pronounce it as an acronym"? I would have said
that means "ell eee dee" as in you're treating it as an acronym
rather than a word and spelling it out.

An acronym is a pronounceable abbreviation, e.g. NATO, scuba, radar.

Ah, I always say acronym to mean abbreviation. I don't care if it's
technically wrong :)

Top notch troll phucker. Well done. Now why you just fuck off and die?

Don't bother trying to answer things that go over your head.
 
On Sun, 06 Oct 2019 18:54:27 +0100, Mark Lloyd <not@mail.invalid> wrote:

On 10/5/19 1:59 PM, Commander Kinsey wrote:

[snip]

More light is better if the whole room is lit evenly. Which is why I
prefer strip lights to point sources. Much better if you're soldering
for example, you don't create shadows, as light can come to the
workpiece from all angles, no matter where your body/head/hands/tools are.

In the case I described, the lamp (a "helpful" person tuned on) was to
my side, almost the same direction as the back of the TV.

The lighting in all my rooms comes from striplights all over the ceiling, so everything is lit nice and evenly.
 
On 2019-10-07 3:18 p.m., Commander Kinsey wrote:
On Sun, 06 Oct 2019 18:54:27 +0100, Mark Lloyd <not@mail.invalid> wrote:

On 10/5/19 1:59 PM, Commander Kinsey wrote:

[snip]

More light is better if the whole room is lit evenly.  Which is why I
prefer strip lights to point sources.  Much better if you're soldering
for example, you don't create shadows, as light can come to the
workpiece from all angles, no matter where your body/head/hands/tools
are.

In the case I described, the lamp (a "helpful" person tuned on) was to
my side, almost the same direction as the back of the TV.

The lighting in all my rooms comes from striplights all over the
ceiling, so everything is lit nice and evenly.

no it isn't and your light is a bare bulb in a night light
 

Welcome to EDABoard.com

Sponsor

Back
Top