Level 1 Charger Plug...

On 7/25/2021 3:42 AM, Peeler wrote:
On Sat, 24 Jul 2021 21:31:30 -0400, Michael Trew wrote:

On 7/24/2021 2:54 PM, Peeler wrote:
On Sat, 24 Jul 2021 11:09:02 -0600, lowbrowwoman, the endlessly driveling,
troll-feeding, senile idiot, blabbered again:


I built a variation of this theme.
\"A variation of this theme\", eh, you ridiculous verbose bigmouth? LMAO
My God, are you annoying. Just shut the hell up. I found his post very
helpful.
Well, I find his feeding of the trolls, his idiotic \"flowery\" language and
his endless gossiping very annoying, senile twit!

I feel very confident 90% of this group would think YOU are the problem
here. Please leave.

                                                      Mikek


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
 
On 7/25/2021 3:42 AM, Peeler wrote:
On Sat, 24 Jul 2021 21:31:30 -0400, Michael Trew wrote:

On 7/24/2021 2:54 PM, Peeler wrote:
On Sat, 24 Jul 2021 11:09:02 -0600, lowbrowwoman, the endlessly driveling,
troll-feeding, senile idiot, blabbered again:


I built a variation of this theme.
\"A variation of this theme\", eh, you ridiculous verbose bigmouth? LMAO
My God, are you annoying. Just shut the hell up. I found his post very
helpful.
Well, I find his feeding of the trolls, his idiotic \"flowery\" language and
his endless gossiping very annoying, senile twit!

I feel very confident 90% of this group would think YOU are the problem
here. Please leave.

                                                      Mikek


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
 
On Tuesday, January 19, 2021 at 1:52:36 AM UTC+2, Rayner Lucas wrote:
In article <0e0fec2f-f1b4-4459...@googlegroups.com>,
george.a...@gmail.com says...

Firstly just wanna say to the Google Groups Einstein that the 18 year
period doesn\'t matter as long as the problem was solved and the guy is
still around on this earth. The Commode/Amiga retro-scene is very much
alive.

Now I have posted lots of pics and info in this thread. I have already
recapped the monitor and done a lot of measurements.

https://www.edaboard.com/threads/commodore-1084s-monitor-with-faint-
vertical-lines.396322/

I thought I\'d also ask here as Alex faced the exact same problem.
It\'s odd to see such an old thread get resurrected, but it is still a
relevant post even if the original participants are no longer reading,
so in this case I don\'t think it\'s anything to get worked up about.

I see from that edaboard thread that you\'ve already tried the most
likely solutions :-(

The slowly drifting *horizontal* lines you mention sound like hum bars,
i.e. excessive voltage ripple from the power supply making its way onto
the display. If this is the case you\'d see two bars on screen at once
(100Hz ripple from a full-wave rectifier, on a screen with 50Hz vertical
refresh) Again, by far the most common cause is a bad filter capacitor
in the low-voltage power supply, but there can be other components at
fault. See https://www.repairfaq.org/sam/monfaq.htm#monrwphb

If you have access to an oscilloscope, you might want to check the
outputs of the power supply for unusually high ripple. In particular,
the output of the 12V DC regulator (IC403) ought to look nice and
stable, as the regulator should smooth out whatever makes it past the
filter capacitor.

Obligatory safety note: be very careful and don\'t work alone, these
things have some nasty voltages inside them (including that 125V DC
power supply output). I highly recommend the safety guidelines at
https://www.repairfaq.org/sam/monfaq.htm#montrbs
Rayner

--
Big-8 Management Board: https://www.big-8.org
Homepage: http://magic-cookie.co.uk

thanks for all your efforts Rayner. I am using a 1:1 isolation transformer when I power up the monitor and I do have an oscope. Ill test the PSU although the lines are many more than two.. maybe 7-8 drifting to the bottom of the screen. Thing is that there are brand new caps everywhere.

I read around the internet and there was this thread and just one more guy with same monitor, same issue. He told me on eab boards via private message that his monitor is with an expert at the moment.

it definetely looks like some harmonic but my knowledge in CRTs is very little at the moment - learning every day.
 
On 7/25/2021 9:14 PM, amdx wrote:
On 7/25/2021 3:42 AM, Peeler wrote:
On Sat, 24 Jul 2021 21:31:30 -0400, Michael Trew wrote:

On 7/24/2021 2:54 PM, Peeler wrote:
On Sat, 24 Jul 2021 11:09:02 -0600, lowbrowwoman, the endlessly
driveling,
troll-feeding, senile idiot, blabbered again:


I built a variation of this theme.
\"A variation of this theme\", eh, you ridiculous verbose bigmouth? LMAO
My God, are you annoying. Just shut the hell up. I found his post very
helpful.
Well, I find his feeding of the trolls, his idiotic \"flowery\" language
and
his endless gossiping very annoying, senile twit!

I feel very confident 90% of this group would think YOU are the problem
here. Please leave.

Mikek

+1
 
On 7/25/2021 9:14 PM, amdx wrote:
On 7/25/2021 3:42 AM, Peeler wrote:
On Sat, 24 Jul 2021 21:31:30 -0400, Michael Trew wrote:

On 7/24/2021 2:54 PM, Peeler wrote:
On Sat, 24 Jul 2021 11:09:02 -0600, lowbrowwoman, the endlessly
driveling,
troll-feeding, senile idiot, blabbered again:


I built a variation of this theme.
\"A variation of this theme\", eh, you ridiculous verbose bigmouth? LMAO
My God, are you annoying. Just shut the hell up. I found his post very
helpful.
Well, I find his feeding of the trolls, his idiotic \"flowery\" language
and
his endless gossiping very annoying, senile twit!

I feel very confident 90% of this group would think YOU are the problem
here. Please leave.

Mikek

+1
 
On Tue, 19 Jan 2021 13:32:52 -0800 (PST), Phil Allison
<pallison49@gmail.com> wrote:

Accursed Dope wrote:
=================

Phil Allison
Bill Sloman wrote:

All Australians seem to like Barry Humphries. I\'m no exception. Cursitor Doom is the kind of dim halfwit who wouldn\'t know that.

Sir Les Patterson is a brilliant lampoon of a certain kind of Australian. Barry Humphries has lots of others.


** I know one who is a dead ringer for Sir Les.

So do I: YOU.


** ROTFLMAO - wot an utter absurdity.

The one difference being the fictional character isn\'t
using the kind of ill-tempered, foul-mouthed outbursts *YOU* are.

** Wot a projection !!.

FYI - fuckhead,

My posts are sometimes very direct, highly critical and contain the odd expletive.
I reserve the right to use \"colourful\" language on blatant trolls and ignorant fools - neither of whom have any right to be posting here.

The appalling, narcissistic fake calling itself CD is on top of that list right now.
He is one pathetic, emotional and intellectual child.

I hope he is only a teenager.
If an adult - he has zero chance of ever recovering and becoming a functioning human being.


...... Phil

I\'m x-posting this to sed so the regulars there can see don\'t confine
your obnoxiousness to that forum alone.
The question I posted originally wasn\'t addressed to you. I always
begin my posts to \"Gentlemen\" in the hope arsewipes like you will read
no further and go straight to the next message. Didn\'t work this time
did it? Why you saw fit to overlook that AND to stick your unwanted
nose into a subject you know *nothing* about. You think aligning the
IF stages of some old radio makes you and expert on RF? You\'re a
no-mark, Allison. You don\'t design shit. You fix up stuff; that\'s all.
And audio stuff at that - NOT RF. And no one needs a PhD in
transmission line theory just to twiddle some pots in a chain of IF
cans. A trained chimpanzee could do it.
So you were strutting your stuff on a electronic design forum when you
know nothing about design. You ignored the fact I\'d addressed that
post to *gentlemen* and you chipped in your 2c on a subject you know
FUCK ALL about AND were foul-mouthed and abusive into the bargain. All
probably because you were pissed as usual. You have nothing worthwhile
to contribute so just fuck off back to the gutter where you belong,
you hopeless drunken PoS.
 
Accursed Doperote:
Accursed Dope wrote:
=================

Phil Allison

** I know one who is a dead ringer for Sir Les.

So do I: YOU.


** ROTFLMAO - wot an utter absurdity.

The one difference being the fictional character isn\'t
using the kind of ill-tempered, foul-mouthed outbursts *YOU* are.

** Wot a projection !!.

FYI - fuckhead,

My posts are sometimes very direct, highly critical and contain the odd expletive.
I reserve the right to use \"colourful\" language on blatant trolls and ignorant fools - neither of whom have any right to be posting here.

The appalling, narcissistic fake calling itself CD is on top of that list right now.
He is one pathetic, emotional and intellectual child.

I hope he is only a teenager.
If an adult - he has zero chance of ever recovering and becoming a functioning human being.


...... Phil

I\'m x-posting this to sed so the regulars there can see don\'t confine
your obnoxiousness to that forum alone.
The question I posted originally wasn\'t addressed to you. I always
begin my posts to \"Gentlemen\" in the hope arsewipes like you will read
no further and go straight to the next message. Didn\'t work this time
did it? Why you saw fit to overlook that AND to stick your unwanted
nose into a subject you know *nothing* about. You think aligning the
IF stages of some old radio makes you and expert on RF? You\'re a
no-mark, Allison. You don\'t design shit. You fix up stuff; that\'s all.
And audio stuff at that - NOT RF. And no one needs a PhD in
transmission line theory just to twiddle some pots in a chain of IF
cans. A trained chimpanzee could do it.
So you were strutting your stuff on a electronic design forum when you
know nothing about design. You ignored the fact I\'d addressed that
post to *gentlemen* and you chipped in your 2c on a subject you know
FUCK ALL about AND were foul-mouthed and abusive into the bargain. All
probably because you were pissed as usual. You have nothing worthwhile
to contribute so just fuck off back to the gutter where you belong,
you hopeless drunken PoS.

**Wow !!!

That is *quite* a \"dummy spit \" ..........

Bet the horroble puke punched him mom and chucked his toys about when he was 4 or 5 years old.

And he\'s still doing it !!!!!!!!!!!!.


....... Phil
 
Accursed Doperote:
Accursed Dope wrote:
=================

Phil Allison

** I know one who is a dead ringer for Sir Les.

So do I: YOU.


** ROTFLMAO - wot an utter absurdity.

The one difference being the fictional character isn\'t
using the kind of ill-tempered, foul-mouthed outbursts *YOU* are.

** Wot a projection !!.

FYI - fuckhead,

My posts are sometimes very direct, highly critical and contain the odd expletive.
I reserve the right to use \"colourful\" language on blatant trolls and ignorant fools - neither of whom have any right to be posting here.

The appalling, narcissistic fake calling itself CD is on top of that list right now.
He is one pathetic, emotional and intellectual child.

I hope he is only a teenager.
If an adult - he has zero chance of ever recovering and becoming a functioning human being.


...... Phil

I\'m x-posting this to sed so the regulars there can see don\'t confine
your obnoxiousness to that forum alone.
The question I posted originally wasn\'t addressed to you. I always
begin my posts to \"Gentlemen\" in the hope arsewipes like you will read
no further and go straight to the next message. Didn\'t work this time
did it? Why you saw fit to overlook that AND to stick your unwanted
nose into a subject you know *nothing* about. You think aligning the
IF stages of some old radio makes you and expert on RF? You\'re a
no-mark, Allison. You don\'t design shit. You fix up stuff; that\'s all.
And audio stuff at that - NOT RF. And no one needs a PhD in
transmission line theory just to twiddle some pots in a chain of IF
cans. A trained chimpanzee could do it.
So you were strutting your stuff on a electronic design forum when you
know nothing about design. You ignored the fact I\'d addressed that
post to *gentlemen* and you chipped in your 2c on a subject you know
FUCK ALL about AND were foul-mouthed and abusive into the bargain. All
probably because you were pissed as usual. You have nothing worthwhile
to contribute so just fuck off back to the gutter where you belong,
you hopeless drunken PoS.

**Wow !!!

That is *quite* a \"dummy spit \" ..........

Bet the horroble puke punched him mom and chucked his toys about when he was 4 or 5 years old.

And he\'s still doing it !!!!!!!!!!!!.


....... Phil
 
On Sun, 25 Jul 2021 20:14:32 -0500, amdx, another senile shithead,
blathered:

Well, I find his feeding of the trolls, his idiotic \"flowery\" language and
his endless gossiping very annoying, senile twit!

I feel very confident 90% of this group would think YOU are the problem
here. Please leave.

                                                      Mikek

Well, senile asshole, MORE than 90% of the \"posters\" on this group ARE
senile (i.e. they are, by their own admittance, way over 70 and 80) who keep
living out their senility (i.e. their absolutely idiotic endless blathering
about any off topic sick shit in this group). I just won\'t take any advice
from senile assholes like these! Capisci?
 
On Sun, 25 Jul 2021 20:14:32 -0500, amdx, another senile shithead,
blathered:

Well, I find his feeding of the trolls, his idiotic \"flowery\" language and
his endless gossiping very annoying, senile twit!

I feel very confident 90% of this group would think YOU are the problem
here. Please leave.

                                                      Mikek

Well, senile asshole, MORE than 90% of the \"posters\" on this group ARE
senile (i.e. they are, by their own admittance, way over 70 and 80) who keep
living out their senility (i.e. their absolutely idiotic endless blathering
about any off topic sick shit in this group). I just won\'t take any advice
from senile assholes like these! Capisci?
 
In article <a5e3b4a1-a1ca-4343-9d1b-d7b44b6490b3n@googlegroups.com>,
george.alibinisis@gmail.com says...
thanks for all your efforts Rayner. I am using a 1:1 isolation
transformer when I power up the monitor and I do have an oscope. Ill
test the PSU although the lines are many more than two.. maybe 7-8
drifting to the bottom of the screen. Thing is that there are brand
new caps everywhere.

I read around the internet and there was this thread and just one more
guy with same monitor, same issue. He told me on eab boards via
private message that his monitor is with an expert at the moment.

it definetely looks like some harmonic but my knowledge in CRTs is
very little at the moment - learning every day.

Okay, if there are 7-8 lines it\'s not mains frequency. I\'d say it\'s
still worth checking the PSU output voltages for stability, though - it
will help to know whether you can rule that section out or not.

The number of horizontal lines suggests the unwanted oscillation has a
350 - 400Hz component, which might be a helpful clue.

If investigating the PSU doesn\'t reveal anything, here\'s how I\'d look at
it. You\'ve got a scope and a schematic annotated with expected voltages
and waveforms. The problem shows up on the display, therefore it must be
present among the signals and voltages that go to the CRT and deflection
yoke. If you can figure out which one(s), you can then trace it back to
the origin from there.

It seems highly unlikely to be anything to do with the EHT or the focus
grid voltage, which is good because those are the ones I\'d least like to
be messing with.

It doesn\'t look much like a deflection problem either, as from the
pictures on the edaboard thread I can\'t see any actual distortion to the
image on screen.

As far as I can see, that mostly just leaves the:

+12V line
+125V line
-20V line
RGB signal lines

going to the CRT neck board as the likely candidates.

The safety guidelines at
https://www.repairfaq.org/sam/monfaq.htm#montrbs include some advice for
staying safe when investigating a running monitor; I particularly
recommend the bit about only ever connecting/disconnecting test leads
when the monitor is unpowered and unplugged.

Let us know if you manage to narrow it down.

Rayner

--
Big-8 Management Board: https://www.big-8.org
Homepage: http://magic-cookie.co.uk
 
In article <a5e3b4a1-a1ca-4343-9d1b-d7b44b6490b3n@googlegroups.com>,
george.alibinisis@gmail.com says...
thanks for all your efforts Rayner. I am using a 1:1 isolation
transformer when I power up the monitor and I do have an oscope. Ill
test the PSU although the lines are many more than two.. maybe 7-8
drifting to the bottom of the screen. Thing is that there are brand
new caps everywhere.

I read around the internet and there was this thread and just one more
guy with same monitor, same issue. He told me on eab boards via
private message that his monitor is with an expert at the moment.

it definetely looks like some harmonic but my knowledge in CRTs is
very little at the moment - learning every day.

Okay, if there are 7-8 lines it\'s not mains frequency. I\'d say it\'s
still worth checking the PSU output voltages for stability, though - it
will help to know whether you can rule that section out or not.

The number of horizontal lines suggests the unwanted oscillation has a
350 - 400Hz component, which might be a helpful clue.

If investigating the PSU doesn\'t reveal anything, here\'s how I\'d look at
it. You\'ve got a scope and a schematic annotated with expected voltages
and waveforms. The problem shows up on the display, therefore it must be
present among the signals and voltages that go to the CRT and deflection
yoke. If you can figure out which one(s), you can then trace it back to
the origin from there.

It seems highly unlikely to be anything to do with the EHT or the focus
grid voltage, which is good because those are the ones I\'d least like to
be messing with.

It doesn\'t look much like a deflection problem either, as from the
pictures on the edaboard thread I can\'t see any actual distortion to the
image on screen.

As far as I can see, that mostly just leaves the:

+12V line
+125V line
-20V line
RGB signal lines

going to the CRT neck board as the likely candidates.

The safety guidelines at
https://www.repairfaq.org/sam/monfaq.htm#montrbs include some advice for
staying safe when investigating a running monitor; I particularly
recommend the bit about only ever connecting/disconnecting test leads
when the monitor is unpowered and unplugged.

Let us know if you manage to narrow it down.

Rayner

--
Big-8 Management Board: https://www.big-8.org
Homepage: http://magic-cookie.co.uk
 
On Sun, 25 Jul 2021 23:14:29 -0400, Michael Trew wrote:

I feel very confident 90% of this group would think YOU are the problem
here. Please leave.

Mikek



+1

LOL Pathetic bunch of senile idiots, really!
 
Three Things:

1. Tourette\'s Syndrome can be partially controlled with strong drugs. But the individual most take those drugs on schedule. This individual does not.
2. This particular individual is nearing its end-of-life with nothing to show for it, alone, and nothing to pass on. \"Bitter\" about covers it.
3. And, it never gives a good result to argue with the Village Idiot in any case, as said idiot is immune to reason and unencumbered by the thought process.

Have a nice day.

Peter Wieck
Melrose Park, PA
 
Three Things:

1. Tourette\'s Syndrome can be partially controlled with strong drugs. But the individual most take those drugs on schedule. This individual does not.
2. This particular individual is nearing its end-of-life with nothing to show for it, alone, and nothing to pass on. \"Bitter\" about covers it.
3. And, it never gives a good result to argue with the Village Idiot in any case, as said idiot is immune to reason and unencumbered by the thought process.

Have a nice day.

Peter Wieck
Melrose Park, PA
 
Dňa piatok 27. augusta 2021 o 18:56:25 UTC+2 používateľ Peter W. napísal:
That was five (5) years ago. But:

Generalized warning: OEM belts for obsolete equipment are generally a bad choice, as those parts in may cases are as old and have sat around just as long as the parts inside the unit. I have had 100% success ordering generic O-rings from McMaster-Carr to the correct size, configuration and diameter (and at a fraction of the OEM cost). I have a choice of materials, O, [], D, 0 or otherwise, even toothed, and they are fresh.
Peter Wieck
Melrose Park, PA

And? Got mine problem now, so what is the big deal?
 
👀 I just inherited one as well, if that manual is still floating around!

On Tuesday, August 29, 2017 at 6:47:52 AM UTC-4, stra...@gmail.com wrote:
On Monday, March 9, 2015 at 5:04:40 PM UTC-4, drd...@gmail.com wrote:
On Wednesday, August 25, 2004 at 5:27:09 PM UTC-5, Chuck Mitchell wrote:
I\'ve inherited a Merrell MA12 amplifier recently and, although it looks in near new condition, all of the tubes (5 of them) are missing. I haven\'t had any success in finding any information about this amp anywhere and was just wondering if anyone may know the tube layout or, better yet, if anyone might have the schematic, or any information at all about this amplifier. Merrell Electronics isn\'t listed in Sams Photofacts, so I\'m at a real loss here.... any help would be greatly appreciated.
Many thanks,
Chuck

I have a manual, if you are interested.
I\'m interested. I\'m only 2 years late.. :)
 
Guys & Gals:

Peeler is a waste of air/water/space with neither the \'gift\' for invective nor the technical experience of our resident Tourette\'s Syndrome participant, Mr. Allison. One wonders if Peeler\'s dam had any offspring that lived, or whether a dam was even involved. Let it fester. It is utterly powerless.

Peter Wieck
Melrose Park, PA
 
Guys & Gals:

Peeler is a waste of air/water/space with neither the \'gift\' for invective nor the technical experience of our resident Tourette\'s Syndrome participant, Mr. Allison. One wonders if Peeler\'s dam had any offspring that lived, or whether a dam was even involved. Let it fester. It is utterly powerless.

Peter Wieck
Melrose Park, PA
 
https://worldradiohistory.com/hd2/IDX-Consumer/Archive-Radio-Electronics-IDX/IDX/60s/1963/Radio-Electronics-1963-01-OCR-Page-0085.pdf \\

It uses 2 x 12AX7A/ECC83 tubes and 3 x 6V6GTA

Originally, the company was in Brooklyn, New York, selling mostly kits.

Re-Cap it before applying power! All of them!

Peter Wieck
Melrose Park, PA
 

Welcome to EDABoard.com

Sponsor

Back
Top