How I would like to change the *digital* cell phone industry

Jeff Liebermann wrote:
"Michael A. Terrell" <mike.terrell@earthlink.net> hath wroth:

Jeff Liebermann wrote:

"Michael A. Terrell" <mike.terrell@earthlink.net> hath wroth:

Have you EVER seen any instrumentation cards for a MAC? I've seen
ISA, EISA, PCI and the pc-104 industrial variant os the EISA buss.

Add EPIC, EPIC Express, ITX, Mini-ITX, Nano-ITX, EBX, PCI-104, PC-104
Plus, CompactPCI, EPIC, EPIC-Express, PC/104, PC/104-Plus,
PC/104-Express, PICMG, AMC, ETX, ECX, XTX, COM-Express, COM-Express,
and probably a few I've missed. PC's own the industrial control
market. The catch is that most boards are rather expensive.

Sorry about the duplicated acronyms.
Click to expand...

:)


The HP 85 desktop computer with the tape drive, tiny monochrome
monitor and IEEE-488 port was used at Microdyne for some very old
equipment for test and alignment, till they finally hired a programmer
to write new software for a PC.
http://www.oldcalculatormuseum.com/hp85.html

You could have used an emulator.
Click to expand...

Most of the software needed updated, anyway. The equipment being
tested had the newer IEEE-488 implementation, and the old system
couldn't make use of it. We had five of them and the cal lab could
barely keep two running. There were days we had to forcible take the
only working unit away from engineering to ship on time. After the new
software was ready, they bought a pile of NI boards for the Win 95
computers used in test and engineering. (This was pre Y2K)


Some of the old HP test hardware has
been emulated on a PC as a means of preserving the investment in
software. For the HP85:
http://www.kaser.com/hp85.html

Incidentally, I collect HP calculators:
http://802.11junk.com/jeffl/pics/hp-calc/
Ugh. Those are ancient photos. My collection is easily twice as
large today. I also do some repairs:
http://802.11junk.com/jeffl/pics/hp65/
in my non-existent spare time.

http://www.measurementcomputing.com/index.html was our supplier for
PC-104 IEEE-488 interface boards. They used to be Computer Boards, Inc.

They still own http:/www.ComputerBoards.com I used to buy
relatively cheap ISA and PCI I/O cards from them.
Click to expand...

I may still have a few of the padded shipping boxes, some of each
name.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
Michael A. Terrell wrote:

<snip>

I've also had IEEE-488 interfaces for the Commodore 64. I used it
with their 4023 and 8023 P series printers.
Click to expand...
Indeed the PET 4000 and 8000 series GPIB ports are useful for
instrument control and I have seen quite a few in physics
departments doing that job.

Regards,

Michael
 
Michael A. Terrell wrote:

<snip>

The HP 85 desktop computer with the tape drive, tiny monochrome
monitor and IEEE-488 port was used at Microdyne for some very old
equipment for test and alignment, till they finally hired a programmer
to write new software for a PC.
Click to expand...
One may be surprised at the current level of interest in HP85
hardware; many are still running well in their roles as experiment
controllers and with spares there is little impetus to replace
them.

Regards,

Michael
 
On 7/22/07 10:10 PM, in article iad8a3h09nn8kok9pjmsf629bs8n8rvvph@4ax.com,
"Jeff Liebermann" <jeffl@cruzio.com> wrote:

"Michael A. Terrell" <mike.terrell@earthlink.net> hath wroth:

Jeff Liebermann wrote:

"Michael A. Terrell" <mike.terrell@earthlink.net> hath wroth:

Have you EVER seen any instrumentation cards for a MAC? I've seen
ISA, EISA, PCI and the pc-104 industrial variant os the EISA buss.

Add EPIC, EPIC Express, ITX, Mini-ITX, Nano-ITX, EBX, PCI-104, PC-104
Plus, CompactPCI, EPIC, EPIC-Express, PC/104, PC/104-Plus,
PC/104-Express, PICMG, AMC, ETX, ECX, XTX, COM-Express, COM-Express,
and probably a few I've missed. PC's own the industrial control
market. The catch is that most boards are rather expensive.

Sorry about the duplicated acronyms.

The HP 85 desktop computer with the tape drive, tiny monochrome
monitor and IEEE-488 port was used at Microdyne for some very old
equipment for test and alignment, till they finally hired a programmer
to write new software for a PC.
http://www.oldcalculatormuseum.com/hp85.html

You could have used an emulator. Some of the old HP test hardware has
been emulated on a PC as a means of preserving the investment in
software. For the HP85:
http://www.kaser.com/hp85.html

(snip)
Click to expand...

I have a new, old-stock printer for the HP85, still in it's bag and box.

Is there any interest in it or is it junk?

Post here or email.
 
Don Bowey wrote:

I have a new, old-stock printer for the HP85, still in it's bag and box.

Is there any interest in it or is it junk?

Some many years ago now, I organized a group purchase from PIC of
Click to expand...
drive belts for the printer and also developed a technique for
re-rubbering the capstan roller in the tape drive. I would
appreciate getting your printer ;)

Regards,

Michael
msg _at_ cybertheque _dot_ org
 
msg <msg@_cybertheque.org_> hath wroth:

Don Bowey wrote:
I have a new, old-stock printer for the HP85, still in it's bag and box.
Is there any interest in it or is it junk?
Click to expand...
Not me. I've got one.

Some many years ago now, I organized a group purchase from PIC of
drive belts for the printer and also developed a technique for
re-rubbering the capstan roller in the tape drive. I would
appreciate getting your printer ;)
Click to expand...
That was the problem with much of the HP mechanical hardware. The
rubber composition just didn't last and would eventually decompose
into a sticky mess. For example, this is my reconstructed HP-65 mag
stripe reader drive wheel using a slice of clear vinyl tubing.
<http://802.11junk.com/jeffl/pics/hp65/slides/Hp65-Drive-Roller.html>
Incidentally, the most difficult part of this exercise was neatly
cutting the hose to size. I had to use a razor blade or a scalpel.

The tape drive roller in the HP85 was susceptible to the same rubber
deterioration.
<http://www.series80.org/Articles/capstan-repair.html>
I fixed two using the same clear vinyl tubing trick. Sorry, no
photos.


--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
In article
<telamon_spamshield-71FBBA.22001022072007@newsclstr02.news.prodigy.com>,
Telamon <telamon_spamshield@pacbell.net.is.invalid> wrote:

In article <46A407C0.21AA2C75@earthlink.net>,
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote:

Kurt wrote:

In article <346324481020070722181912elecconnec@AmericaOnLine.com>,
Todd Allcock <elecconnec@AmericaOnLine.com> wrote:

At 21 Jul 2007 19:40:38 -0700 Kurt wrote:

Bottom line - People want products that work for them. Period.
Mac delivers, like them or not.


Yet Macs have been around for 20 years and still only have a 5% market
share- clearly they "deliver" something those 5% want, but not something
"everyone" wants.

Haven't me from running a good-sized design advertising design studio.
Never got what everyone else liked about PCs (and forget the "PCS are
cheaper" excuse - you pay more in time and virus prevention later).
Use Virtual PC about once a week to test on IE browser and access a
couple ActiveX powered control panels.


More lies from the mac community. There are excellent anti virus
programs that are free for private use AVG is my favorite.

Have you EVER seen any instrumentation cards for a MAC? I've seen
ISA, EISA, PCI and the pc-104 industrial variant os the EISA buss.

Snip

Yes. National Instruments.

--
Telamon
Ventura, California
Click to expand...
Hey, neighbor (also Ventura)

--
To reply by email, remove the word "space"
 
On 7/23/07 7:24 AM, in article 13a9ehfgv6l9b2c@corp.supernews.com, "msg"
<msg@_cybertheque.org_> wrote:

Don Bowey wrote:


I have a new, old-stock printer for the HP85, still in it's bag and box.

Is there any interest in it or is it junk?

Some many years ago now, I organized a group purchase from PIC of
drive belts for the printer and also developed a technique for
re-rubbering the capstan roller in the tape drive. I would
appreciate getting your printer ;)

Regards,

Michael
msg _at_ cybertheque _dot_ org
Click to expand...
Where are you located?
 
In article <labolide-DEA51B.08301123072007@news.giganews.com>,
Kurt <labolide@spacegmail.com> wrote:

In article
telamon_spamshield-71FBBA.22001022072007@newsclstr02.news.prodigy.com>,
Telamon <telamon_spamshield@pacbell.net.is.invalid> wrote:

In article <46A407C0.21AA2C75@earthlink.net>,
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote:

Kurt wrote:

In article <346324481020070722181912elecconnec@AmericaOnLine.com>,
Todd Allcock <elecconnec@AmericaOnLine.com> wrote:

At 21 Jul 2007 19:40:38 -0700 Kurt wrote:

Bottom line - People want products that work for them. Period.
Mac delivers, like them or not.


Yet Macs have been around for 20 years and still only have a 5%
market
share- clearly they "deliver" something those 5% want, but not
something
"everyone" wants.

Haven't me from running a good-sized design advertising design studio.
Never got what everyone else liked about PCs (and forget the "PCS are
cheaper" excuse - you pay more in time and virus prevention later).
Use Virtual PC about once a week to test on IE browser and access a
couple ActiveX powered control panels.


More lies from the mac community. There are excellent anti virus
programs that are free for private use AVG is my favorite.

Have you EVER seen any instrumentation cards for a MAC? I've seen
ISA, EISA, PCI and the pc-104 industrial variant os the EISA buss.

Snip

Yes. National Instruments.

--
Telamon
Ventura, California

Hey, neighbor (also Ventura)
Click to expand...
There are a few people from Ventura, Oxnard, and LA that post to this
news group.

--
Telamon
Ventura, California
 
I see you don't believe the government's stated primary goal of making E911
available to cell users..
Click to expand...
I don't believe or disbelieve. The OP asked a question. I offered my
contribution.
--
DaveC
me@bogusdomain.net
This is an invalid return address
Please reply in the news group
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top