Zenith Projection TV Convergence Adjustments Help!

J

Jean

Guest
Hi all. Can anyone tell me where the convergence adjustments are on a
Zenith PV800PG? Thanks, Jean.
 
"Jean" <Radiostuff@webtv.net> wrote in message
news:26806-43E16FFE-1664@storefull-3335.bay.webtv.net...
Hi all. Can anyone tell me where the convergence adjustments are on a
Zenith PV800PG? Thanks, Jean.

I'm not familiar with that model, but after around 1996 or so the
convergence is done in the service menu. No mechanical pots to adjust.
 
It is a 1985 vintage 3 tube front projector. It has a slide out board
with 20+ so called convergence controls on it. Under the best
circumstances the convergence will be marginal at best.

Do not forget those tubes used an optical Gel between the lens and crt
face for cooling. Most of those I saw 10 or so years ago the gel was
going bad and the convergence and image quality could not be acheived
without replacement of the entire crt assembly.
 
Thanks everyone for the responses. I guess there is not much I can do
with it. Thanks again! Jean.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top