wwvb receiver chip needed

I read in sci.electronics.design that Tim Shoppa
<shoppa@trailing-edge.com> wrote (in
<1114535224.836730.108080@f14g2000cwb.googlegroups.com>) about 'wwvb
receiver chip needed', on Tue, 26 Apr 2005:

Zero-beat to WWV is hard to do better than 50Hz by ear.
Have you tried a Lissajou display?
--
Regards, John Woodgate, OOO - Own Opinions Only.
There are two sides to every question, except
'What is a Moebius strip?'
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk
 
"John Woodgate" <jmw@jmwa.demon.contraspam.yuk> wrote in message
news:YnBixcNlxobCFwLW@jmwa.demon.co.uk...
I read in sci.electronics.design that Tim Shoppa
shoppa@trailing-edge.com> wrote (in
1114535224.836730.108080@f14g2000cwb.googlegroups.com>) about 'wwvb
receiver chip needed', on Tue, 26 Apr 2005:

Zero-beat to WWV is hard to do better than 50Hz by ear.

Have you tried a Lissajou display?
--
Or use the S-meter to see very low freq beats.
 
"Watson A.Name - "Watt Sun, the Dark Remover"" <NOSPAM@dslextreme.com> wrote
in message news:116v37hgr5glgae@corp.supernews.com...
Or use the S-meter to see very low freq beats.
Check out the latest Atlanticon proceedings, or the upcoming issue of the
Homebrewer for a circuit to allow you to see zero beat to within a fraction
of a Hz.

...
 
["Followup-To:" header set to rec.radio.amateur.homebrew.]
On Wed, 27 Apr 2005 06:01:02 -0700, Watson A.Name wrote:
"John Woodgate" <jmw@jmwa.demon.contraspam.yuk> wrote in message
news:YnBixcNlxobCFwLW@jmwa.demon.co.uk...
I read in sci.electronics.design that Tim Shoppa
shoppa@trailing-edge.com> wrote (in
1114535224.836730.108080@f14g2000cwb.googlegroups.com>) about 'wwvb
receiver chip needed', on Tue, 26 Apr 2005:

Zero-beat to WWV is hard to do better than 50Hz by ear.

Have you tried a Lissajou display?

Or use the S-meter to see very low freq beats.
S-Meter! On 'modern' gear?? All they give you is a bank of
eye candy in the form of leds.

But, yes -- I've used Real S-Meters to get Real Damn Close to zero
best in days past.

73
Jonesy
--
| Marvin L Jones | jonz | W3DHJ | linux
| Gunnison, Colorado | @ | Jonesy | OS/2 __
| 7,703' -- 2,345m | config.com | DM68mn SK
 

Welcome to EDABoard.com

Sponsor

Back
Top