WT: schematics for Viewsonic VX910 LCD

P

Pinballer

Guest
Veiwsonic VX910 LCD monitor

If anybody has these schematics or nows of them on line I am trying to find
the part number for D660 on the power board. I've had a few suggestions and
I appreciate it but I'm still stuck.
If worse comes to worse I could try a suitable part (believe to be a dual
diode) if anybody has any suggestions on a replacement.
If she blows she blows, oh well.

Thanks people
Brian
 
On Thu, 8 Feb 2007 16:35:59 -0500, "Pinballer" <bcrowe1@cogeco.ca> put
finger to keyboard and composed:

Veiwsonic VX910 LCD monitor

If anybody has these schematics or nows of them on line I am trying to find
the part number for D660 on the power board. I've had a few suggestions and
I appreciate it but I'm still stuck.
If worse comes to worse I could try a suitable part (believe to be a dual
diode) if anybody has any suggestions on a replacement.
Click to expand...
Can you upload a photo of the PCB to your web space?

If she blows she blows, oh well.

Thanks people
Brian
Click to expand...
- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 
I don't have any webspace but I could email you a pic of it. I have the pcb
out of the monitor.


"Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
news:13rts2hcvrjce9vp2e6mdpo052h0880t8h@4ax.com...
On Thu, 8 Feb 2007 16:35:59 -0500, "Pinballer" <bcrowe1@cogeco.ca> put
finger to keyboard and composed:

Veiwsonic VX910 LCD monitor

If anybody has these schematics or nows of them on line I am trying to
find
the part number for D660 on the power board. I've had a few suggestions
and
I appreciate it but I'm still stuck.
If worse comes to worse I could try a suitable part (believe to be a dual
diode) if anybody has any suggestions on a replacement.

Can you upload a photo of the PCB to your web space?

If she blows she blows, oh well.

Thanks people
Brian


- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
Click to expand...
 
On Sun, 11 Feb 2007 12:50:59 -0500, "Pinballer" <bcrowe1@cogeco.ca>
put finger to keyboard and composed:

I don't have any webspace but I could email you a pic of it. I have the pcb
out of the monitor.
Click to expand...
OK, do that and I'll post it on my web space for others to look at.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 
On Tue, 13 Feb 2007 08:10:49 +1100, Franc Zabkar Has Frothed:

On Sun, 11 Feb 2007 12:50:59 -0500, "Pinballer" <bcrowe1@cogeco.ca
put finger to keyboard and composed:

I don't have any webspace but I could email you a pic of it. I have the pcb
out of the monitor.

OK, do that and I'll post it on my web space for others to look at.

- Franc Zabkar
Click to expand...

Http://tinypic.com


--
Pierre Salinger Memorial Hook, Line & Sinker, June 2004

COOSN-266-06-25794
 
markings on D660:
LT428
and
MBR10100Ct
outside pins are grounded, middle pin has 12volts on it.


On Feb 8, 3:35 pm, "Pinballer" <bcro...@cogeco.ca> wrote:
VeiwsonicVX910LCD monitor

If anybody has these schematics or nows of them on line I am trying to find
the part number for D660 on the power board. I've had a few suggestions and
I appreciate it but I'm still stuck.
If worse comes to worse I could try a suitable part (believe to be a dual
diode) if anybody has any suggestions on a replacement.
If she blows she blows, oh well.

Thanks people
Brian
Click to expand...
 
WOW. Thankyou very much.
Now to find the part.

Thanks

<rontvman@hotmail.com> wrote in message
news:1171483101.892979.114490@l53g2000cwa.googlegroups.com...
markings on D660:
LT428
and
MBR10100Ct
outside pins are grounded, middle pin has 12volts on it.


On Feb 8, 3:35 pm, "Pinballer" <bcro...@cogeco.ca> wrote:
VeiwsonicVX910LCD monitor

If anybody has these schematics or nows of them on line I am trying to
find
the part number for D660 on the power board. I've had a few suggestions
and
I appreciate it but I'm still stuck.
If worse comes to worse I could try a suitable part (believe to be a dual
diode) if anybody has any suggestions on a replacement.
If she blows she blows, oh well.

Thanks people
Brian
Click to expand...
 
On Wed, 14 Feb 2007 15:39:03 -0500, Pinballer Has Frothed:

WOW. Thankyou very much.
Now to find the part.
Click to expand...
http://www.vishay.com/diodes/list/product-88666/sales


--
Pierre Salinger Memorial Hook, Line & Sinker, June 2004

COOSN-266-06-25794
 
Replace the caps that are around D660. thats what was wrong with the
one i have on my bench. (2) 470ufd at 25v...also there is a 330ufd
cap
wrapped in a sleeve not far from that..replace it...as far as your
diode,
if you can find the original, NTE lists a replacement for MBR20100CT.
Not sure if its the same, but might be worth a shot.

On Feb 14, 2:39 pm, "Pinballer" <bcro...@cogeco.ca> wrote:
WOW. Thankyou very much.
Now to find the part.

Thanks

rontv...@hotmail.com> wrote in message

news:1171483101.892979.114490@l53g2000cwa.googlegroups.com...



markings on D660:
LT428
and
MBR10100Ct
outside pins are grounded, middle pin has 12volts on it.

On Feb 8, 3:35 pm, "Pinballer" <bcro...@cogeco.ca> wrote:
VeiwsonicVX910LCD monitor

If anybody has these schematics or nows of them on line I am trying to
find
the part number for D660 on the power board. I've had a few suggestions
and
I appreciate it but I'm still stuck.
If worse comes to worse I could try a suitable part (believe to be a dual
diode) if anybody has any suggestions on a replacement.
If she blows she blows, oh well.

Thanks people
Brian- Hide quoted text -

- Show quoted text -
Click to expand...
 
I went and ordered the diode from my local electronics shop but its going to
take over a week to get it. Thanks for the tip about the caps too. I will
probably do them as well.

Thanks


<rontvman@hotmail.com> wrote in message
news:1171582989.058733.20940@a34g2000cwb.googlegroups.com...
Replace the caps that are around D660. thats what was wrong with the
one i have on my bench. (2) 470ufd at 25v...also there is a 330ufd
cap
wrapped in a sleeve not far from that..replace it...as far as your
diode,
if you can find the original, NTE lists a replacement for MBR20100CT.
Not sure if its the same, but might be worth a shot.

On Feb 14, 2:39 pm, "Pinballer" <bcro...@cogeco.ca> wrote:
WOW. Thankyou very much.
Now to find the part.

Thanks

rontv...@hotmail.com> wrote in message

news:1171483101.892979.114490@l53g2000cwa.googlegroups.com...



markings on D660:
LT428
and
MBR10100Ct
outside pins are grounded, middle pin has 12volts on it.

On Feb 8, 3:35 pm, "Pinballer" <bcro...@cogeco.ca> wrote:
VeiwsonicVX910LCD monitor

If anybody has these schematics or nows of them on line I am trying to
find
the part number for D660 on the power board. I've had a few
suggestions
and
I appreciate it but I'm still stuck.
If worse comes to worse I could try a suitable part (believe to be a
dual
diode) if anybody has any suggestions on a replacement.
If she blows she blows, oh well.

Thanks people
Brian- Hide quoted text -

- Show quoted text -
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top