wiz-c problem

Hi all


I have a problem using the I2C module found within the WIZ C. I need
the clock (SCL) to be less than 100kHz. The manual says that there is a

constant named IIStretch that enables the user to elongate the Data and

clock pulses with the integer set by this constant. This is done
because as a default the WIZ C transmits data at 400KHz. Howewver, this

is not working since I verified with the WIZ C waveform analyser. Any
suggestions please?


Thank you

 

[Martin Riddle]

I hate the Appbuilder, learn C. Wiz is a pretty good 'C' compilier, and adhears to most, if not all, C conventions.
You can mull on over to the Yahoo FEDPIC group and Find your answer.

Cheers

<nvllfarrugia@yahoo.co.uk> wrote in message news:1109679481.979376.222950@z14g2000cwz.googlegroups.com...

Hi all


I have a problem using the I2C module found within the WIZ C. I need
the clock (SCL) to be less than 100kHz. The manual says that there is a

constant named IIStretch that enables the user to elongate the Data and

clock pulses with the integer set by this constant. This is done
because as a default the WIZ C transmits data at 400KHz. Howewver, this

is not working since I verified with the WIZ C waveform analyser. Any
suggestions please?


Thank you