P
Peabody
Guest
I just bought a Vizio sound bar, model SB2020n-J6, which is the cheap 2.0
sound bar. It has a feature that allows the sound bar to \"learn\" the IR
codes transmitted by your TV remote\'s Volume-, Volume+, and Mute buttons.
That\'s so you can use your TV remote to control the sound bar. I have a
Sharp TV, and haven\'t been able to get the learn function to work.
According to the manual, if I hold down the OK and Mute buttons on the
Vizio remote for about 5 seconds, the sound bar will go into learning mode
and display a blinking white LED. Then you hit the Mute button on the TV
remote, which the sound bar should learn. Basically like a universal
learning remote.
I get the blinking, but it\'s amber, not white, and it doesn\'t learn. The
same for Volume- and Volume+. Volume- should have a blinking yellow LED,
and Volume+ should have blinking amber. But on mine all three are blinking
amber.
I don\'t want to take this one back only to have the replacement do the same
thing. So I wondered if anyone here also has this model, and could at
least tell mw what the three blinking colors are, and of course whether the
learning function works at all.
Vizio support says it\'s probably incompatibility with Sharp remotes. They
also say there is no new firmware for this model.
If anyone can shed any light on this, I would appreciate it. It\'s a pain
to have to use the Vizio remote for volume functions, and the other remote
to change channels. If it matters, I\'m using an optical cable. This
sound bar model doesn\'t have HDMI in or out, so the interaction HDMI would
permit isn\'t available.
sound bar. It has a feature that allows the sound bar to \"learn\" the IR
codes transmitted by your TV remote\'s Volume-, Volume+, and Mute buttons.
That\'s so you can use your TV remote to control the sound bar. I have a
Sharp TV, and haven\'t been able to get the learn function to work.
According to the manual, if I hold down the OK and Mute buttons on the
Vizio remote for about 5 seconds, the sound bar will go into learning mode
and display a blinking white LED. Then you hit the Mute button on the TV
remote, which the sound bar should learn. Basically like a universal
learning remote.
I get the blinking, but it\'s amber, not white, and it doesn\'t learn. The
same for Volume- and Volume+. Volume- should have a blinking yellow LED,
and Volume+ should have blinking amber. But on mine all three are blinking
amber.
I don\'t want to take this one back only to have the replacement do the same
thing. So I wondered if anyone here also has this model, and could at
least tell mw what the three blinking colors are, and of course whether the
learning function works at all.
Vizio support says it\'s probably incompatibility with Sharp remotes. They
also say there is no new firmware for this model.
If anyone can shed any light on this, I would appreciate it. It\'s a pain
to have to use the Vizio remote for volume functions, and the other remote
to change channels. If it matters, I\'m using an optical cable. This
sound bar model doesn\'t have HDMI in or out, so the interaction HDMI would
permit isn\'t available.