Video Head audio / control

[Fernando]

I am needing help to regulate the screws of the head audio / controls of
a video cassette Panasonic. I believe that a special ribbon should exist to
do this
adjust, or a procedure that I don't know. Please help me.
Tks
Fernando

 

[Jerry Greenberg]

I would guess you are mentioning the tape path alignment.

There is a proper tape for this. Also you will need the proper
instruments and tools, such as a scope and DVM, just to mention only a
very few, to see the carrier from the head preamp, and also to check
and calibrate the sync switching puses. The service manual for your
VCR should provide all the necessary test points, and information
required to do the tracking alignment.

Jerry G.
========

"Fernando" <fjpc60@hotmail.com> wrote in message news:<1087654836.120115@gorgo.centroin.com.br>...

I am needing help to regulate the screws of the head audio / controls of
a video cassette Panasonic. I believe that a special ribbon should exist to
do this
adjust, or a procedure that I don't know. Please help me.
Tks
Fernando

 

[Patch]

"Fernando" <fjpc60@hotmail.com> wrote in message
news:1087654836.120115@gorgo.centroin.com.br...

I am needing help to regulate the screws of the head audio / controls of
a video cassette Panasonic. I believe that a special ribbon should exist
to
do this
adjust, or a procedure that I don't know. Please help me.
Tks
Fernando


Take my advice, don't do it. Even if are experienced at tape path alignment,

it's damned hard to align the audio-control head. You will just get it all
screwed up. What symptoms are you having that make you think the alignment
is off?