Toshiba SD-KP19 - no sound

S

Sam Goldwasser

Guest
This is a nice portable DVD player/LCD monitor. When I first got it with
a known sound problem, it worked fine. Then within 10 minutes, the sound
had become very noisy, and then disappeared entirely. It is now completely
silent. Headphone disconnect contacts have been exercised and modes double
checked. Given that there are only 2 or 3 large ICs inside and very little
discrete circuitry, it seems likely that the problem is inside one of the
ICs. But I'm just checking here to see if anyone has run across this before.
There is no obvious physical damage.

Thanks.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 
On Thu, 06 Sep 2007 19:23:48 -0400, Sam Goldwasser wrote:

This is a nice portable DVD player/LCD monitor. When I first got it with
a known sound problem, it worked fine. Then within 10 minutes, the sound
had become very noisy, and then disappeared entirely. It is now completely
silent. Headphone disconnect contacts have been exercised and modes double
checked. Given that there are only 2 or 3 large ICs inside and very little
discrete circuitry, it seems likely that the problem is inside one of the
ICs. But I'm just checking here to see if anyone has run across this before.
There is no obvious physical damage.

Thanks.
Remove the battery, let sit, try again.
 
Meat Plow <meat@petitmorte.net> writes:

On Thu, 06 Sep 2007 19:23:48 -0400, Sam Goldwasser wrote:


This is a nice portable DVD player/LCD monitor. When I first got it with
a known sound problem, it worked fine. Then within 10 minutes, the sound
had become very noisy, and then disappeared entirely. It is now completely
silent. Headphone disconnect contacts have been exercised and modes double
checked. Given that there are only 2 or 3 large ICs inside and very little
discrete circuitry, it seems likely that the problem is inside one of the
ICs. But I'm just checking here to see if anyone has run across this before.
There is no obvious physical damage.

Thanks.

Remove the battery, let sit, try again.
No battery, only running on AC power.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 

Welcome to EDABoard.com

Sponsor

Back
Top