Tingle from UPS plug when on backup

R

rowan194

Guest
Noticed before when swapping the Jaycar "crappy" power meter to
different sockets that the *plug* of the UPS gave me a bit of a buzz
when it was chirping away in backup/no mains mode.

Obviously it's not going to be backfeeding its full inverter power
into the socket that it's plugged into, otherwise it would be
attempting to power everything (other devices on the power board, the
rest of the house wiring, ...)

Just curious what it may be, whether it's common or a cause for
concern.
 
"rowan194" <googlegroups@sensation.net.au> wrote in message
news:33376e07-1119-4b00-b661-b41ad38fd19b@u6g2000prc.googlegroups.com...
Noticed before when swapping the Jaycar "crappy" power meter to
different sockets that the *plug* of the UPS gave me a bit of a buzz
when it was chirping away in backup/no mains mode.

Obviously it's not going to be backfeeding its full inverter power
into the socket that it's plugged into, otherwise it would be
attempting to power everything (other devices on the power board, the
rest of the house wiring, ...)

Just curious what it may be, whether it's common or a cause for
concern.
Click to expand...
Suppression capacitor(s) discharging into your hand?

Chris
 
you can fix this by adding another relay
on the mains side, fined a relay that runs on
a 240 volt winding from your electircal outlet
there not cheep sometimes, connect the mains
to the relay that added on its coil and to the open
contacts of the relay and connect the moving
contacts to were the mains go on the UPS board.
so when the mains gos off it cuts the the mains input
to your UPS, no leaks.
that leak can trip the safety switch on your house.

"rowan194" <googlegroups@sensation.net.au> wrote in message
news:33376e07-1119-4b00-b661-b41ad38fd19b@u6g2000prc.googlegroups.com...
Noticed before when swapping the Jaycar "crappy" power meter to
different sockets that the *plug* of the UPS gave me a bit of a buzz
when it was chirping away in backup/no mains mode.

Obviously it's not going to be backfeeding its full inverter power
into the socket that it's plugged into, otherwise it would be
attempting to power everything (other devices on the power board, the
rest of the house wiring, ...)

Just curious what it may be, whether it's common or a cause for
concern.
Click to expand...
 
rowan194 wrote:

Noticed before when swapping the Jaycar "crappy" power meter to
different sockets that the *plug* of the UPS gave me a bit of a buzz
when it was chirping away in backup/no mains mode.
Click to expand...
Normal and doubtless within IEC limits.

Graham
 
"ZACK." wrote:

you can fix this by adding another relay
on the mains side
Click to expand...
Don't bother. He'll be breaking electrical code already.

Graham
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top