Small 110 hole solderless breadboards ?

[manuka]

Any Australian supplier of "Global" EXP-325 solderless breadboards ?
These little babies are just 48mm x 53mm with 130 tie points ( 11 rows
& 2 rails)& about 1/3 the size of a normal Dick Smith "WISH" board.

We've a good stockist here in NZ , & have used them for a September
SiChip Picaxe article since they beautifully accomodate smaller
Picaxe-08 circuits -such as a nifty datalogger just rolled -see =>
www.picaxe.orcon.net.nz/datalog8.bas . Any Oz. outlets known ?

 

[Russ]

"manuka" <manuka@orcon.net.nz> wrote in message
news:dd8572bb.0307230335.318a83d0@posting.google.com...

Any Australian supplier of "Global" EXP-325 solderless breadboards ?
These little babies are just 48mm x 53mm with 130 tie points ( 11 rows
& 2 rails)& about 1/3 the size of a normal Dick Smith "WISH" board.

We've a good stockist here in NZ , & have used them for a September
SiChip Picaxe article since they beautifully accomodate smaller
Picaxe-08 circuits -such as a nifty datalogger just rolled -see =
www.picaxe.orcon.net.nz/datalog8.bas . Any Oz. outlets known ?

Jaycar have a small 300 hole board (30x10), 39x87mm, but there are no rails.

Russ.

 

[manuka]

Thanks for the pointers to Jaycar & Farnell versions, but these are
still too big -we need the smallest size going = "Son of a Breadboard"
! Global Specialities EXP-325 130 tie point version has shaped up as
ideal for a PICAXE-08 datalogger design being written up for September
"Silicon Chip". See code => www.picaxe.orcon.net.nz/datalog8.bas & pix
=> www.picaxe.orcon.net.nz/datalog8.jpg

 

[David L. Jones]

On 24 Jul 2003 14:24:26 -0700, manuka@orcon.net.nz (manuka) wrote:

Thanks for the pointers to Jaycar & Farnell versions, but these are
still too big -we need the smallest size going = "Son of a Breadboard"

Thats why I said chop them up!
Hey, they are going CHEAP!

Dave
---------------------------
(remove the "_" from my email address to reply)