R
Rahan
Guest
Hi,
it´s not a joke, I start to "use" microsim 8.0 I have a big impedance
network and would like to see the RMS values of the currents flowing through
some wires.
But, for the moment (sic), I didn´t succeded encountering the following
problems:
- I just found "bias current probes" which are not helpful with a
traditional 50Hz (60) signal, but I´m able to see the signals using probe
resulting to a graph....(wow)
- The circuit include inductors and current sources, I would like to see the
currents value (like reading an amperemeter) when a steady state has been
reached
So can one or more microsim user tips me on how to get *RMS* currents
indication on my schematic (don´t laugh) when *the steady state is reached*
Any help will be greatly appreciated
J-M
Sweden (just in case, for a beer...)
it´s not a joke, I start to "use" microsim 8.0 I have a big impedance
network and would like to see the RMS values of the currents flowing through
some wires.
But, for the moment (sic), I didn´t succeded encountering the following
problems:
- I just found "bias current probes" which are not helpful with a
traditional 50Hz (60) signal, but I´m able to see the signals using probe
resulting to a graph....(wow)
- The circuit include inductors and current sources, I would like to see the
currents value (like reading an amperemeter) when a steady state has been
reached
So can one or more microsim user tips me on how to get *RMS* currents
indication on my schematic (don´t laugh) when *the steady state is reached*
Any help will be greatly appreciated
J-M
Sweden (just in case, for a beer...)