Prefered resistor range

Larry Brasfield wrote:
"Fred Bloggs" <nospam@nospam.com> wrote in
message news:423795C7.8090005@nospam.com...

Larry Brasfield wrote:

[Cut worthless spew and off-point material.]

Here is where an algorithmic approach really pays.
I really want something closer, and I am willing to
parallel two parts to get it. I enter:
stdvals 1% 63.54k 2p
and quickly get a useful result:
Approximate 63540 as 1(1/66500 + 1/1.43e+06),
yielding 63544.9 (ratio = 1.0001)

Ooh my- well we have been down that road before and that is NOT how you reasonably calculate a parallel combination.


Ok, Mr. superior resistor calculator. Take the
above example and find a pair that more closely
achieves the specified result. If you cannot do
that, define "reasonably calculate" such that your
method beats a few seconds of typing.

[Cut more worthless spew.]
Click to expand...
I am not here to educate you, stupid, simple, and pretentious, nobody
that you are. But taking your wussy example as a case in point, your
little idiot program computes a 1.43M - this number is not readily
available in many manufacturer E96 lines- Xicon only has 1.0M, 1.5M, and
2.2M, other lines like IRC, and Vishay stop at 1.0M, as a standard
catalog offering available from places like Mouser. Since you are
actually a non-practitioner, you missed the fact that 1.43M was an
oddball value, anyone else would have known better. Thnx for the
ammunition though, like I said, you're so damned dumb, every time you
post, we find out more and more to confirm you are simple fraud and
incompetent.
 
John Woodgate wrote:
I read in sci.electronics.design that The Phantom <phantom@aol.com
wrote (in <2cff31pmrj6cvn6pf7sld0vhfmslm7tml5@4ax.com>) about 'Prefered
resistor range', on Tue, 15 Mar 2005:

On Wed, 16 Mar 2005 02:02:39 GMT, Rich Grise <richgrise@example.net
wrote:


On Tue, 15 Mar 2005 10:00:01 -0600, The Phantom wrote:


Now that you have the answer to your first question, don't you want to
know why the 10% and 5% standard values don't result from a simple
root-of-10 formula?

Of course. Why is that?

I don't know; I was hoping you would. :)

Seriously, though, I have never seen an explanation I would consider
truly authoritative. But some years the question came up in the
British magazine, Wireless World, and I believe that "Cathode Ray"
said that slight perturbations were made so that the color
combinations on the resistor body would be more distinguishable.
Perhaps John Woodgate can help us out here.


It wasn't 'Cathode Ray' (M G Scroggie) but another nom de plume, 'Thomas
Roddam' (whose real name was published when he died but I can't find
it).

Even so, the explanation was not very convincing. If I can get the
calculation right this time, the E12 ratio is 10^(1/12) = 1.211528..

To two figures, the values 10, 12, 15, 18, 22, 56 and 68 are correctly
rounded, but the 'missing' values are 26.10157, not 27, 31.62278, not
33, 38.31187, not 39, 46.41589, not 47, and 82.54042, not 82.

The explanation put forward was that the values were adjusted to get
'better colour contrast'. This would have been plausible if 25 (red-
green) had been avoided, but it really don't hold up in the actual
cases. And the 'adjusted' values don't give even approximately equal
quantities of the different coloured paints.

I found some 48 k resistors in a piece of WW2 equipment. I guess someone
ran out of violet paint.
Click to expand...
Well- I am here to tell you that 1) the explanation about color contrast
is bunk, 2) no curve fit necessary, and 3) there exists a very-very-very
simple formulation to calculate precisely every single value to three
digits without the mysterious roundoff error effect due to preferred
values. You know how to do this too- just stop playing your games.
 
On Wed, 16 Mar 2005 09:43:17 +0000, John Woodgate
<jmw@jmwa.demon.contraspam.yuk> wrote:

I read in sci.electronics.design that The Phantom <phantom@aol.com
wrote (in <2cff31pmrj6cvn6pf7sld0vhfmslm7tml5@4ax.com>) about 'Prefered
resistor range', on Tue, 15 Mar 2005:
On Wed, 16 Mar 2005 02:02:39 GMT, Rich Grise <richgrise@example.net
wrote:

On Tue, 15 Mar 2005 10:00:01 -0600, The Phantom wrote:

Now that you have the answer to your first question, don't you want to
know why the 10% and 5% standard values don't result from a simple
root-of-10 formula?

Of course. Why is that?

I don't know; I was hoping you would. :)

Seriously, though, I have never seen an explanation I would consider
truly authoritative. But some years the question came up in the
British magazine, Wireless World, and I believe that "Cathode Ray"
said that slight perturbations were made so that the color
combinations on the resistor body would be more distinguishable.
Perhaps John Woodgate can help us out here.

It wasn't 'Cathode Ray' (M G Scroggie) but another nom de plume, 'Thomas
Roddam' (whose real name was published when he died but I can't find
it).
Click to expand...
Do you know which issue had this discussion? I don't remember. I
sure wish Wireless World would come out with a searchable database (on
DVD perhaps) for all the issues.

Even so, the explanation was not very convincing. If I can get the
calculation right this time, the E12 ratio is 10^(1/12) = 1.211528..

To two figures, the values 10, 12, 15, 18, 22, 56 and 68 are correctly
rounded, but the 'missing' values are 26.10157, not 27, 31.62278, not
33, 38.31187, not 39, 46.41589, not 47, and 82.54042, not 82.

The explanation put forward was that the values were adjusted to get
'better colour contrast'. This would have been plausible if 25 (red-
green) had been avoided, but it really don't hold up in the actual
cases.
Click to expand...
I had the same reaction as you; I immediately thought that perhaps
the idea had been to help out those who had red-green color blindness.
But as you say, it doesn't seem that the values chosen make sense
under this theory.

Have you ever heard any other reasonable explanation? I wonder if
there is anyone still alive who knows for sure. Or is there a written
description of the procedure followed in some old proceedings?

And the 'adjusted' values don't give even approximately equal
quantities of the different coloured paints.

I found some 48 k resistors in a piece of WW2 equipment. I guess someone
ran out of violet paint.
Click to expand...
 
The Phantom wrote:
On Wed, 16 Mar 2005 14:39:46 +1300, Terry Given <my_name@ieee.org
wrote:

[SNIP]
Yeah, it makes HAL9000 do a *lot* of calculations, but so what - it
results in a barely perceptible delay between hitting <enter> and
getting the answers.


Exactly. So what? My criterion for acceptable speed has always
been; if the result is there on the monitor, or the display of my
calculator when I have picked up my pencil to write down the results
in my notebook, then that's fast enough!
Click to expand...
thats good enough for me, too :)

I once did some designs for audio, some second order filters. Two
R's and two C's. We were using these low-cost Japanese carbon film
resistors, 5% nominal. I noticed that without fail, they were within
1% of their nominal values. But only values from the E24 series were
available. And the 5% caps we were using were similarly close to
their nominal values. So, rather than specify particular cap values
and then try to find combinations of resistors to get close to the
exact computed values, I generated arrays with a decades worth of
resistor standard values centered on the computed exact values, and
the same with the caps. Then I programmed four nested loops to try
every possible combination of 2 R's and 2 C's, sorting in order of how
closely the desired filter polynomial was realized. This was in the
late 70's, running on Microsoft interpreted Basic. It ran all night,
but there were all the possibilities in the morning! I'm pretty sure
that today it would be fast enough to meet my criterion for acceptable
speed! I guess that's your experience; I just haven't had a need to
do this for a long time.
Click to expand...
Nice. Although it does remind me of the spice simulation that ran for
almost 3 days. We started it on friday afternoon, then went on the piss
(someone was leaving, so shouted a keg. great place to work :)

Alas, monday morning rolled around and we discovered the fucking hard
drive was full (after 1.4Gb of .dat file), and it had stopped late
saturday night. doh.

Cheers
Terry
 
I read in sci.electronics.design that The Phantom <phantom@aol.com>
wrote (in <2cff31pmrj6cvn6pf7sld0vhfmslm7tml5@4ax.com>) about 'Prefered
resistor range', on Tue, 15 Mar 2005:
On Wed, 16 Mar 2005 02:02:39 GMT, Rich Grise <richgrise@example.net
wrote:

On Tue, 15 Mar 2005 10:00:01 -0600, The Phantom wrote:

Now that you have the answer to your first question, don't you want to
know why the 10% and 5% standard values don't result from a simple
root-of-10 formula?

Of course. Why is that?

I don't know; I was hoping you would. :)

Seriously, though, I have never seen an explanation I would consider
truly authoritative. But some years the question came up in the
British magazine, Wireless World, and I believe that "Cathode Ray"
said that slight perturbations were made so that the color
combinations on the resistor body would be more distinguishable.
Perhaps John Woodgate can help us out here.

It wasn't 'Cathode Ray' (M G Scroggie) but another nom de plume, 'Thomas
Click to expand...
Roddam' (whose real name was published when he died but I can't find
it).

Even so, the explanation was not very convincing. If I can get the
calculation right this time, the E12 ratio is 10^(1/12) = 1.211528..

To two figures, the values 10, 12, 15, 18, 22, 56 and 68 are correctly
rounded, but the 'missing' values are 26.10157, not 27, 31.62278, not
33, 38.31187, not 39, 46.41589, not 47, and 82.54042, not 82.

The explanation put forward was that the values were adjusted to get
'better colour contrast'. This would have been plausible if 25 (red-
green) had been avoided, but it really don't hold up in the actual
cases. And the 'adjusted' values don't give even approximately equal
quantities of the different coloured paints.

I found some 48 k resistors in a piece of WW2 equipment. I guess someone
ran out of violet paint.
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk
 
On Wed, 16 Mar 2005 14:39:46 +1300, Terry Given <my_name@ieee.org>
wrote:

Larry Brasfield wrote:
"Glenn Gundlach" <stratus46@yahoo.com> wrote in message
news:1110918855.695485.18390@z14g2000cwz.googlegroups.com...

Rich Grise wrote:

On Tue, 15 Mar 2005 14:23:06 +0800, Rheilly Phoull wrote:

I seem to have lost the formula that calculates the 1% 'preferred'
range of resitors. Can anyone help out please ??

Sure!

http://www.google.com/search?q=standard+resistor+values

Who needs "formulas"? :)

Gee, I just had a copy of the page in the Digi-Key catalog. You have to
be able to buy the value you spec.


I can appreciate the humor here, abstractly.
But after designing the Nth precision active filter,
countless dividers, and other precise circuits, I
got tired of table lookups. To lookup just one
value is not overly hard, just tedious. You start
with what you want, look at the table, and do a
little simple arithmetic (often by eye) to decide
which value is closest. Maybe you adjust that
choice according to which way it went for some
nearby resistor(s).

Now, if I want a 63.54k resistor, I enter:
stdvals 1% 63.54k
and get back 63400. This saves just a little time,
so I cannot argue any clear superiority there.

Here is where an algorithmic approach really pays.
I really want something closer, and I am willing to
parallel two parts to get it. I enter:
stdvals 1% 63.54k 2p
and quickly get a useful result:
Approximate 63540 as 1(1/66500 + 1/1.43e+06),
yielding 63544.9 (ratio = 1.0001)
This saves some real time. (I can remember when,
during my stint as an engineering tech, I was given
the task of doing approximately this same search
for a short list of resistors. If not for the aid of an
HP-35, it would have taken days, not the hours I
had to spend on it.)

A common task in active RC filter design is to
come up with capacitor pairs that deliver a close
approximation to the values you really want. Ask:
stdvals 5% 588p 2a
and ye shall receive:
Approximate 5.88e-10 with (5.6e-10 + 2.7e-11),
yielding 5.87e-10 (ratio = 1.0017)

Any of you who have done this by hand know
the lingering doubt that remains when you have
not used an exhaustive search to find whatever
answer you settled upon. Or you know just
how tedious the exhaustive search is. Or both.

I guess the natural extension of Rich's joke is:
Who needs calculators or computers? I've
got tables of values and logarithms, a slide rule,
and my trusty pencil and pad. Valves forever!


I do this with Brute Force (ie matlab). I have a simple s-file that
takes an array of available values, which may or may not be entire
ranges - smt design optimisation usually involves minimising the number
of different parts.

Then I calculate every possible 1,2,3,4 resistor combination, using:

1 resistor
2 series
2 parallel
1 paralleled with (2 series)
2 paralleled with (2 series)

and for each of the 5 cases sort the result in order of increasing error

I specify a required accuracy, then throw away all results which are worse.

then display the first 10 entries in each of the 5 combinations.

Yeah, it makes HAL9000 do a *lot* of calculations, but so what - it
results in a barely perceptible delay between hitting <enter> and
getting the answers.
Click to expand...
Exactly. So what? My criterion for acceptable speed has always
been; if the result is there on the monitor, or the display of my
calculator when I have picked up my pencil to write down the results
in my notebook, then that's fast enough!

I once did some designs for audio, some second order filters. Two
R's and two C's. We were using these low-cost Japanese carbon film
resistors, 5% nominal. I noticed that without fail, they were within
1% of their nominal values. But only values from the E24 series were
available. And the 5% caps we were using were similarly close to
their nominal values. So, rather than specify particular cap values
and then try to find combinations of resistors to get close to the
exact computed values, I generated arrays with a decades worth of
resistor standard values centered on the computed exact values, and
the same with the caps. Then I programmed four nested loops to try
every possible combination of 2 R's and 2 C's, sorting in order of how
closely the desired filter polynomial was realized. This was in the
late 70's, running on Microsoft interpreted Basic. It ran all night,
but there were all the possibilities in the morning! I'm pretty sure
that today it would be fast enough to meet my criterion for acceptable
speed! I guess that's your experience; I just haven't had a need to
do this for a long time.

Cheers
Terry
Click to expand...
 
R

Rheilly Phoull

Guest
G'Day All,
I seem to have lost the formula that calculates the 1% 'preferred' range of
resitors.
Can anyone help out please ??

--
Regards ..... Rheilly Phoull
 
"Rheilly Phoull" <Rheilly@bigpong.com> wrote in
message news:39ndaaF64dibcU1@individual.net...
G'Day All,
Hi.
I seem to have lost the formula that calculates the 1% 'preferred' range of
resitors.
Can anyone help out please ??
Click to expand...
I have appended a very handy Perl script I wrote to
deal with not knowing all (or having forgot some) of
the 1% values. It also finds pairs of values to get
closer values than the standard spreads allow.
(This is useful when using 0.1% parts)

Run it without arguments for invocation tips.
Get Perl at www.activestate.com .

--
--Larry Brasfield
email: donotspam_larry_brasfield@hotmail.com
Above views may belong only to me.

============== script only follows ================
#!/usr/bin/perl

my $usage = <<'_';
Usage:
stdvals tolerance
or
stdvals tolerance value [2a|2p|2r]
or
stdvals -n decsplit
_


my $pick = shift;

my %stdsplits = (
3 => '50%',
6 => '20%',
12 => '10%',
24 => '5%',
96 => '1%',
);
my %digits = (
3 => 2,
6 => 2,
12 => 2,
24 => 2,
96 => 3
);

# Unfortunately, the lower tolerances do not derive mathematically.
%fudge2digits = (
'1.0' => '1.0',
'1.1' => '1.1',
'1.2' => '1.2',
'1.3' => '1.3',
'1.5' => '1.5',
'1.6' => '1.6',
'1.8' => '1.8',
'2.0' => '2.0',
'2.2' => '2.2',
'2.4' => '2.4',
'2.6' => '2.7',
'2.9' => '3.0',
'3.2' => '3.3',
'3.5' => '3.6',
'3.8' => '3.9',
'4.2' => '4.3',
'4.6' => '4.7',
'5.1' => '5.1',
'5.6' => '5.6',
'6.2' => '6.2',
'6.8' => '6.8',
'7.5' => '7.5',
'8.3' => '8.2',
'9.1' => '9.1',
);

my %stdtols;

map {
my $tol = $stdsplits{$_};
$stdtols{$tol} = $_;
} keys %stdsplits;

my $decsplit;
my $tolerance;
my $sigdigits;

sub saydec {
print "Standard decade splits are: ", join(' ', sort keys %stdsplits), "\n";
}
sub saytol {
print "Standard tolerances are: ", join(' ', sort keys %stdtols), "\n";
}

if (!$pick) {
print $usage;
&saytol;
&saydec;
exit 1;
}

if ($pick =~ m/^\d+$/) {
if ($decsplit = $stdtols{$pick.'%'}) {
$tolerance = $pick.'%';
}
else {
print $usage;
&saytol;
exit 1;
}
}
elsif ($pick eq '-n' && ($tolerance = $stdsplits{$pick = shift})) {
print "Standard $tolerance values:\n";
$decsplit = $pick;
}
else {
print $usage;
&saydec;
exit 1;
}

my $target = shift;
my $parts = shift;
my $combine = undef;
if (! $parts) { $parts = 1; }
else {
unless ($parts =~ s/([apr])$/$combine=$1,''/e) {
print $usage;
print "Specify 2a, 2p or 2r as a combination method.\n";
exit 1;
}
}

$sigdigits = $digits{0+$decsplit};

my @values = ();

my $loginc = log(10) / $decsplit;
my $fmt = sprintf("%%%1d.%1df", $sigdigits+1, $sigdigits-1);
for (my $i = 0; $i < $decsplit; ++$i) {
my $value = sprintf($fmt, exp($i * $loginc));
if ($sigdigits < 3) {
$value = $fudge2digits{$value};
}
if (! $target) {
my $sep = (($i+1) % 12)? " " : "\n";
print "$value$sep";
}
else {
push(@values, $value + 0.0);
}
}

exit 0 unless $target;

push(@values, 10.0);

my %multsuf = (
'f' => 1e-15,
'p' => 1e-12,
'n' => 1e-9,
'u' => 1e-6,
'm' => 1e-3,
'k' => 1e3,
'K' => 1e3,
'M' => 1e6,
'G' => 1e9,
'T' => 1e12,
);

sub floor {
my $v = shift;
if ($v >= 0) { return int($v); }
else { return -1 - int(-$v); }
}

sub unsuffix {
my $tv = shift;
my $mult = 1;
my $suf;
if ($tv =~ s/([kKnupfmMGT])$/$suf=$1,''/e) {
$mult = $multsuf{$suf};
}
else { $suf = ''; }
return $tv * $mult;
}

sub closest {
my $tv = shift;
$tv = &unsuffix($tv);
if ($tv <= 0) { return undef; }
my $prescale = &floor(log($tv) / log(10));
$prescale = 10 ** $prescale;
my $findv = $tv / $prescale;
my $bestv = undef;
for (my $i = 0; $i < $decsplit; ++$i) {
my $lo = $values[$i];
my $hi = $values[$i+1];
if ($findv >= $lo && $findv < $hi) {
my $gm = sqrt($lo * $hi);
$bestv = ($findv < $gm)? $lo : $hi;
last;
}
}
return $bestv *= $prescale;
}

if ($parts == 1) {
print &closest($target), "\n";
}

sub gapprox {
my ($tv, $scale, $rtvbase, $rtvadj) = @_;
my $vb = &closest($scale * $tv);
my $va = 1.0/$tv - 1.0/$vb;
if ($va > 0) {
$va = &closest(1.0/$va);
$$rtvbase = $vb;
$$rtvadj = $va;
return 1.0/(1.0/$vb + 1.0/$va);
}
else {
$$rtvbase = $vb;
$$rtvadj = undef;
return $vb;
}
}

sub zapprox {
my ($tv, $scale, $rtvbase, $rtvadj) = @_;
$$rtvbase = &closest($scale * $tv);
my $va = $tv - $$rtvbase;
if ($va > 0) {
$$rtvadj = &closest($va);
return $$rtvbase + $$rtvadj;
}
else {
$$rtvadj = 0;
return $$rtvbase;
}
}

sub rapprox {
my ($rv, $scale, $rtvbase, $rtvadj) = @_;
$$rtvbase = &closest($scale * $rv);
$$rtvadj = &closest($$rtvbase / $rv);
return $$rtvbase / $$rtvadj;
}

if ($parts == 2) {
my $tv = &unsuffix($target);
if ($combine eq 'p') {
my ($tvbase, $tvadj);
my $bestratio = 2.0;
my $bestgot = undef;
my $bestscale = undef;
for (my $scale = 1.00; $scale < 1.5; $scale += 0.01) {
my ($tvb, $tva);
my $tvgot = &gapprox($tv, $scale, \$tvb, \$tva);
next unless $tvgot;
my $ratio = $tvgot / $tv;
if ($ratio < 1) { $ratio = 1.0 / $ratio; }
if ($ratio < $bestratio) {
$tvbase = $tvb;
$tvadj = $tva;
$bestratio = $ratio;
$bestgot = $tvgot;
}
}
my $adjv = defined($tvadj)? sprintf("%g",$tvadj) : 'none';
printf("Approximate %g as 1(1/%g + 1/%s), yielding %g (ratio = %6.4f)\n",
$tv, $tvbase, $adjv, $bestgot, $bestratio);
}
if ($combine eq 'a') {
my ($tvbase, $tvadj);
my $bestratio = 2.0;
my $bestgot = undef;
my $bestscale = undef;
for (my $scale = 1.0; $scale > 0.7; $scale -= 0.01) {
my ($tvb, $tva);
my $tvgot = &zapprox($tv, $scale, \$tvb, \$tva);
my $ratio = $tvgot / $tv;
if ($ratio < 1) { $ratio = 1.0 / $ratio; }
if ($ratio < $bestratio) {
$tvbase = $tvb;
$tvadj = $tva;
$bestratio = $ratio;
$bestgot = $tvgot;
}
}
printf("Approximate %g with (%g + %g), yielding %g (ratio = %6.4f)\n",
$tv, $tvbase, $tvadj, $bestgot, $bestratio);
}
if ($combine eq 'r') {
my ($tvbase, $tvadj);
my $bestratio = 2.0;
my $bestgot = undef;
my $bestscale = undef;
for (my $scale = 0.34; $scale < 3.4; $scale += 0.01) {
my ($tvb, $tva);
my $tvgot = &rapprox($tv, $scale, \$tvb, \$tva);
my $ratio = $tvgot / $tv;
if ($ratio < 1) { $ratio = 1.0 / $ratio; }
if ($ratio < $bestratio) {
$tvbase = $tvb;
$tvadj = $tva;
$bestratio = $ratio;
$bestgot = $tvgot;
}
}
printf("Approximate ratio %8.6f with (%g / %g), yielding %g\n",
$tv, $tvbase, $tvadj, $bestgot);
}
}
if ($parts > 2) {
print "Sorry, not doing more than 2 parts yet.\n";
}


__END__
 
I read in sci.electronics.design that Rheilly Phoull
<Rheilly@bigpong.com> wrote (in <39ndaaF64dibcU1@individual.net>) about
'Prefered resistor range', on Tue, 15 Mar 2005:
G'Day All,
I seem to have lost the formula that calculates the 1% 'preferred' range of
resitors.
Can anyone help out please ??

If you mean the E96 series, the ratio between adjacent values is the
Click to expand...
97th root of 10 (97 because the 97th value is ten times the first value
and is thus part of the next decade), which is 1.024021979....
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk
 
"John Woodgate" <jmw@jmwa.demon.contraspam.yuk> wrote in
message news:SrVhs+A1bpNCFwqb@jmwa.demon.co.uk...
I read in sci.electronics.design that Rheilly Phoull
Rheilly@bigpong.com> wrote (in <39ndaaF64dibcU1@individual.net>) about
'Prefered resistor range', on Tue, 15 Mar 2005:
G'Day All,
I seem to have lost the formula that calculates the 1% 'preferred' range of
resitors.
Can anyone help out please ??

If you mean the E96 series, the ratio between adjacent values is the
97th root of 10 (97 because the 97th value is ten times the first value
and is thus part of the next decade), which is 1.024021979....
Click to expand...
Can you reconsider that assertion? I cannot make
sense of it, being stuck in the following thought pattern:
If there are 96 distinct values per decade, then for each
96 value steps, a whole power of ten is traversed.
Expressed mathematically, (and ignoring the rounding
necessary to get standard values), the E96 set can be
obtained as 10^(N * log10(10) / 96) == 10^(N/96)
for the 96 integer values of N from 0 to 95. This
corresponds to a multiplicative interval equal to the
96th root of 10, not the 97 root.

In addition to the problem outlined above, what you
say is contrary to the algorithm that I successfully
applied to devise the program I posted earlier on
this thread. I tested that quite a bit, so I am quite
sure that the decade should be split logarithmically
into 96 equal steps (sans rounding). In my testing,
I compared results with the table published by
several resistor manufacturers.

--
--Larry Brasfield
email: donotspam_larry_brasfield@hotmail.com
Above views may belong only to me.
 
I read in sci.electronics.design that Larry Brasfield <donotspam_larry_b
rasfield@hotmail.com> wrote (in <G7xZd.64$oD6.990@news.uswest.net>)
about 'Prefered resistor range', on Tue, 15 Mar 2005:

Can you reconsider that assertion? I cannot make sense of it, being
stuck in the following thought pattern: If there are 96 distinct values
per decade, then for each 96 value steps, a whole power of ten is
traversed. Expressed mathematically, (and ignoring the rounding
necessary to get standard values), the E96 set can be obtained as 10^(N
* log10(10) / 96) == 10^(N/96) for the 96 integer values of N from 0 to
95. This corresponds to a multiplicative interval equal to the 96th
root of 10, not the 97 root.
Click to expand...
My understanding is that the values in these series don't include the
first value of the next decade. So the E6 series has 7 values (which
actually don't quite match the calculated values for reasons lost in the
mists of time) : 1, 1.5, 2.2, 3.3, 4.7, 6.8 and 8.2, involving 6
multiplications by the *7th* root of ten; the 7th multiplication would
give 10, which is the first value in the next decade.

However, I don't have the 'preferred numbers' standard, so I won't
assert that I am correct.
In addition to the problem outlined above, what you say is contrary to
the algorithm that I successfully applied to devise the program I posted
earlier on this thread. I tested that quite a bit, so I am quite sure
that the decade should be split logarithmically into 96 equal steps
(sans rounding). In my testing, I compared results with the table
published by several resistor manufacturers.
Click to expand...
Well, it depends on how your algorithm works, and I can't read PERL. The
96th root is 1.024275221... To four significant figures, the two roots
are 1.024... So if you preserve only those four figures and calculate
the values by successive multiplications, you will get the same answers
whether you use the 96th root or the 97th root.
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk
 
On Tue, 15 Mar 2005 09:34:42 +0000, John Woodgate
<jmw@jmwa.demon.contraspam.yuk> wrote:

I read in sci.electronics.design that Larry Brasfield <donotspam_larry_b
rasfield@hotmail.com> wrote (in <G7xZd.64$oD6.990@news.uswest.net>)
about 'Prefered resistor range', on Tue, 15 Mar 2005:

Can you reconsider that assertion? I cannot make sense of it, being
stuck in the following thought pattern: If there are 96 distinct values
per decade, then for each 96 value steps, a whole power of ten is
traversed. Expressed mathematically, (and ignoring the rounding
necessary to get standard values), the E96 set can be obtained as 10^(N
* log10(10) / 96) == 10^(N/96) for the 96 integer values of N from 0 to
95. This corresponds to a multiplicative interval equal to the 96th
root of 10, not the 97 root.

My understanding is that the values in these series don't include the
first value of the next decade. So the E6 series has 7 values (which
actually don't quite match the calculated values for reasons lost in the
mists of time) : 1, 1.5, 2.2, 3.3, 4.7, 6.8 and 8.2, involving 6
multiplications by the *7th* root of ten; the 7th multiplication would
give 10, which is the first value in the next decade.

However, I don't have the 'preferred numbers' standard, so I won't
assert that I am correct.
Click to expand...
IEC 60063

Google will find a copy, e.g.
http://www.bourns.com/pdfs/standard_decade_values_02.pdf


It seems that John is wrong (an infrequent occurrence!). The E6
series does *not* include 8.2, and there are only 6 multiplications by
the 6th root of ten.

Regards,
Allan
 
I read in sci.electronics.design that Allan Herriman <allan.herriman.hat
es.spam@ctam.com.au.invalid> wrote (in <24dd319v1dp5isq55b8qmsqrqcurn2hh
ql@4ax.com>) about 'Prefered resistor range', on Tue, 15 Mar 2005:


IEC 60063

Google will find a copy, e.g.
http://www.bourns.com/pdfs/standard_decade_values_02.pdf


It seems that John is wrong (an infrequent occurrence!).
Click to expand...
Thank you.

The E6 series
does *not* include 8.2, and there are only 6 multiplications by the 6th
root of ten.
Click to expand...
Yes, of course. I should have chosen E12, where such an error would have
been much more obvious to me. The magnitude of the error for the E96
series is 0.000253241...
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk
 
On Tue, 15 Mar 2005 09:34:42 +0000, John Woodgate
<jmw@jmwa.demon.contraspam.yuk> wrote:

I read in sci.electronics.design that Larry Brasfield <donotspam_larry_b
rasfield@hotmail.com> wrote (in <G7xZd.64$oD6.990@news.uswest.net>)
about 'Prefered resistor range', on Tue, 15 Mar 2005:

Can you reconsider that assertion? I cannot make sense of it, being
stuck in the following thought pattern: If there are 96 distinct values
per decade, then for each 96 value steps, a whole power of ten is
traversed. Expressed mathematically, (and ignoring the rounding
necessary to get standard values), the E96 set can be obtained as 10^(N
* log10(10) / 96) == 10^(N/96) for the 96 integer values of N from 0 to
95. This corresponds to a multiplicative interval equal to the 96th
root of 10, not the 97 root.

My understanding is that the values in these series don't include the
first value of the next decade. So the E6 series has 7 values (which
actually don't quite match the calculated values for reasons lost in the
mists of time) : 1, 1.5, 2.2, 3.3, 4.7, 6.8 and 8.2, involving 6
multiplications by the *7th* root of ten; the 7th multiplication would
give 10, which is the first value in the next decade.

However, I don't have the 'preferred numbers' standard, so I won't
assert that I am correct.

In addition to the problem outlined above, what you say is contrary to
the algorithm that I successfully applied to devise the program I posted
earlier on this thread. I tested that quite a bit, so I am quite sure
that the decade should be split logarithmically into 96 equal steps
(sans rounding). In my testing, I compared results with the table
published by several resistor manufacturers.

Well, it depends on how your algorithm works, and I can't read PERL. The
96th root is 1.024275221... To four significant figures, the two roots
are 1.024... So if you preserve only those four figures and calculate
the values by successive multiplications, you will get the same answers
whether you use the 96th root or the 97th root.
Click to expand...
And the answers you get will not always be in the E96 series.

For example, 102 is the second in the E96 series; multiply by 1.024
and you get 104.448, which rounds to 104 which is not in the series.

Or, if you start with 100 and repeatedly multiply by 1.024, keeping
the unrounded product as you go along (and *rounding* the running
product at each step only to get the three digit number which should
be a member of the E96 series), the first error occurs when the
running product equals 136.1129468, which, rounded, is 136 and not 137
as it should be.

To get right results, you must use a multiplier of more than 4 digits.

Try this: go to
http://www.bourns.com/pdfs/standard_decade_values_02.pdf

and put the 96 values from the E96 series in a list, take the log of
all the elements of the list (still in a list), make another list of
the 95 first differences, add up the 95 first differences, divide the
sum by 95, and take the antilog of that number. This will be the
average ratio between elements of the E96 series. I get
1.02427190671, which is much closer to the 96th root of 10 than to the
97th root of 10.

By the way, there is a peculiarity (error?) in the E192 series. If
you use the 192nd root of 10 to generate the series, the 186th member
will be calculated as 919.478686, which would round to 919, but the
official value is 920. Apparently the folks who originally did the
numbers were a little off on that one.
 
"The Phantom" <phantom@aol.com> wrote in message
news:pajd315rj7gn532aojb1klaq1uepjm62na@4ax.com...
On Tue, 15 Mar 2005 09:34:42 +0000, John Woodgate
jmw@jmwa.demon.contraspam.yuk> wrote:

I read in sci.electronics.design that Larry Brasfield <donotspam_larry_b
rasfield@hotmail.com> wrote (in <G7xZd.64$oD6.990@news.uswest.net>)
about 'Prefered resistor range', on Tue, 15 Mar 2005:

Can you reconsider that assertion? I cannot make sense of it, being
stuck in the following thought pattern: If there are 96 distinct values
per decade, then for each 96 value steps, a whole power of ten is
traversed. Expressed mathematically, (and ignoring the rounding
necessary to get standard values), the E96 set can be obtained as 10^(N
* log10(10) / 96) == 10^(N/96) for the 96 integer values of N from 0 to
95. This corresponds to a multiplicative interval equal to the 96th
root of 10, not the 97 root.

My understanding is that the values in these series don't include the
first value of the next decade. So the E6 series has 7 values (which
actually don't quite match the calculated values for reasons lost in the
mists of time) : 1, 1.5, 2.2, 3.3, 4.7, 6.8 and 8.2, involving 6
multiplications by the *7th* root of ten; the 7th multiplication would
give 10, which is the first value in the next decade.

However, I don't have the 'preferred numbers' standard, so I won't
assert that I am correct.

In addition to the problem outlined above, what you say is contrary to
the algorithm that I successfully applied to devise the program I posted
earlier on this thread. I tested that quite a bit, so I am quite sure
that the decade should be split logarithmically into 96 equal steps
(sans rounding). In my testing, I compared results with the table
published by several resistor manufacturers.

Well, it depends on how your algorithm works, and I can't read PERL. The
96th root is 1.024275221... To four significant figures, the two roots
are 1.024... So if you preserve only those four figures and calculate
the values by successive multiplications, you will get the same answers
whether you use the 96th root or the 97th root.

And the answers you get will not always be in the E96 series.

For example, 102 is the second in the E96 series; multiply by 1.024
and you get 104.448, which rounds to 104 which is not in the series.

Or, if you start with 100 and repeatedly multiply by 1.024, keeping
the unrounded product as you go along (and *rounding* the running
product at each step only to get the three digit number which should
be a member of the E96 series), the first error occurs when the
running product equals 136.1129468, which, rounded, is 136 and not 137
as it should be.

To get right results, you must use a multiplier of more than 4 digits.

Try this: go to
http://www.bourns.com/pdfs/standard_decade_values_02.pdf

and put the 96 values from the E96 series in a list, take the log of
all the elements of the list (still in a list), make another list of
the 95 first differences, add up the 95 first differences, divide the
sum by 95, and take the antilog of that number. This will be the
average ratio between elements of the E96 series. I get
1.02427190671, which is much closer to the 96th root of 10 than to the
97th root of 10.

By the way, there is a peculiarity (error?) in the E192 series. If
you use the 192nd root of 10 to generate the series, the 186th member
will be calculated as 919.478686, which would round to 919, but the
official value is 920. Apparently the folks who originally did the
numbers were a little off on that one.
Click to expand...
Hmmm, mebbe I shouldn't have asked ??

--
Regards ..... Rheilly Phoull
 
I read in sci.electronics.design that The Phantom <phantom@aol.com>
wrote (in <pajd315rj7gn532aojb1klaq1uepjm62na@4ax.com>) about 'Prefered
resistor range', on Tue, 15 Mar 2005:
By the way, there is a peculiarity (error?) in the E192 series. If you
use the 192nd root of 10 to generate the series, the 186th member will
be calculated as 919.478686, which would round to 919, but the official
value is 920. Apparently the folks who originally did the numbers were
a little off on that one.
Click to expand...
They obviously looked at rounding: 919.478686..-> 919.47869 -> 919.4787
-> 919.479 -> 919.48 -> 919.5 - > 920.

This is a well-known effect of rounding and can be combated, but not
necessarily eliminated (as in this case), by 'casting to the odd'. This
means that you round down a number ending in 5 if the resulting final
digit would be odd if you rounded up.
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk
 
On Tue, 15 Mar 2005 13:09:27 +0000, John Woodgate
<jmw@jmwa.demon.contraspam.yuk> wrote:

I read in sci.electronics.design that The Phantom <phantom@aol.com
wrote (in <pajd315rj7gn532aojb1klaq1uepjm62na@4ax.com>) about 'Prefered
resistor range', on Tue, 15 Mar 2005:
By the way, there is a peculiarity (error?) in the E192 series. If you
use the 192nd root of 10 to generate the series, the 186th member will
be calculated as 919.478686, which would round to 919, but the official
value is 920. Apparently the folks who originally did the numbers were
a little off on that one.

They obviously looked at rounding: 919.478686..-> 919.47869 -> 919.4787
-> 919.479 -> 919.48 -> 919.5 - > 920.

This is a well-known effect of rounding and can be combated, but not
necessarily eliminated (as in this case), by 'casting to the odd'. This
means that you round down a number ending in 5 if the resulting final
digit would be odd if you rounded up.
Click to expand...
I don't think this is the correct explanation. If it were then why
wasn't the 7th member of the E192 series calculated like this?:

107.4607828 -> 107.460783 -> 107.46078 -> 107.4608 -> 107.461
-> 107.46 -> 107.5 -> 108.

Or why wasn't the 13th member calculated like this?:

115.478198 -> 115.47820 -> 115.4782 -> 115.478 -> 115.48
-> 115.5 -> 116.

or the 43rd member, or the 44th member, etc.

You know better than to do this, as do I, and they probably did too as
evidenced by the four cases just above, where they didn't do it.

They just made a mistake.
 
On Tue, 15 Mar 2005 14:23:06 +0800, Rheilly Phoull wrote:

G'Day All,
I seem to have lost the formula that calculates the 1% 'preferred' range of
resitors.
Can anyone help out please ??
Click to expand...
Sure!

http://www.google.com/search?q=standard+resistor+values

Who needs "formulas"? :)

Cheers!
Rich
 
"John Woodgate" <jmw@jmwa.demon.contraspam.yuk> wrote in
message news:uYUewiBywqNCFw+L@jmwa.demon.co.uk...
I read in sci.electronics.design that Larry Brasfield <donotspam_larry_b
rasfield@hotmail.com> wrote (in <G7xZd.64$oD6.990@news.uswest.net>)
about 'Prefered resistor range', on Tue, 15 Mar 2005:

Can you reconsider that assertion? I cannot make sense of it, being
stuck in the following thought pattern: If there are 96 distinct values
per decade, then for each 96 value steps, a whole power of ten is
traversed. Expressed mathematically, (and ignoring the rounding
necessary to get standard values), the E96 set can be obtained as 10^(N
* log10(10) / 96) == 10^(N/96) for the 96 integer values of N from 0 to
95. This corresponds to a multiplicative interval equal to the 96th
root of 10, not the 97 root.

My understanding is that the values in these series don't include the
first value of the next decade. So the E6 series has 7 values (which
actually don't quite match the calculated values for reasons lost in the
mists of time) : 1, 1.5, 2.2, 3.3, 4.7, 6.8 and 8.2, involving 6
multiplications by the *7th* root of ten; the 7th multiplication would
give 10, which is the first value in the next decade.

However, I don't have the 'preferred numbers' standard, so I won't
assert that I am correct.
Click to expand...
I should maybe leave this at that point, but I am responding also
to some points you make elsewhere in this thread.

In addition to the problem outlined above, what you say is contrary to
the algorithm that I successfully applied to devise the program I posted
earlier on this thread. I tested that quite a bit, so I am quite sure
that the decade should be split logarithmically into 96 equal steps
(sans rounding). In my testing, I compared results with the table
published by several resistor manufacturers.

Well, it depends on how your algorithm works, and I can't read PERL.
Click to expand...
You don't need to study my code to understand my point,
which is that by splitting the decade logarithmically into 96
intervals, the correct 96 values are obtained. I conveyed
this experience to underscore the idea that the reasoning I
laid out should be examined carefully, as it is likely correct.

The
96th root is 1.024275221... To four significant figures, the two roots
are 1.024... So if you preserve only those four figures and calculate
the values by successive multiplications, you will get the same answers
whether you use the 96th root or the 97th root.
Click to expand...
When I evaluate 1.024^96, I get 9.7453 on my HP32S. (And
this agrees with another calculator I checked.) For the E96 series
starting with 1, the 96th and last member is 9.76. So your method
requires one more step (times 1.024) to reach the next decade. It
produces 97 values per decade, (assuming we round off to 3 digits
at each closest approach to whole powers of 10), whereas all the
tables I've seen have only 96 values per decade.

Maybe there is some trick rule for rounding, dropping accumulated
"erroneous" residue at special places, or other machinations, that
will convert what would otherwise be 97 intervals into the 96 that
are required to duplicate the standard values. I do not doubt your
ability to devise such a rule. But I would hope you could see, if
not acknowledge, the preferable simplicity of this rule:
for (N = 0 to 95)
standard_value[n] = round_to_3_digits( 10 ^ (N/96) )

Answering Mr. Phoull's request for "the formula that calculates the
1% 'preferred' range of resitors", absent any authoritive statement
about how somebody long ago derived those tables, we have a
choice: Use the above formula because it is easy and works; or
complete the task of devising or elucidating your formula, which
will be more complicated, amenable to no closed form solution,
and unintuitive; or await or discover some other formula in the
hope that it will be better. I should think it is an easy choice.

--
--Larry Brasfield
email: donotspam_larry_brasfield@hotmail.com
Above views may belong only to me.
 
"Rheilly Phoull" <Rheilly@bigpong.com> wrote:

G'Day All,
I seem to have lost the formula that calculates the 1% 'preferred' range of
resitors.
Can anyone help out please ??
Click to expand...
No help with a formula, but, you can get ResCAD for Win32 here

http://web.newsguy.com/pentangle/rescad11.zip

which will give you nearest E6/12/24/96 values and combinations for
series/parallel/voltage divider.

It uses lookup tables.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top