Please help me!!!!! ModelSim question...

[Simone Winkler]

Hello!

I am a newbie trying to perform a simulation with ModelSim...
I did a (very small) project with the Xilinx downloadable webpack - and as i
wanted to simulate it with modelsim, modelsim closed after the following
line:

#vsim -lib work -t 1ps -L xilinxcorelib testbench

the transcript file shows the following:

# Reading D:/Programme/Modeltech_5.5d/win32/../tcl/vsim/pref.tcl

my modelsim version is 5.5d - but i also tried 5.5e. Didn't work!
They always crash after the same line.
I already tried to reinstall everything - no change. I don't know what to do
anymore...please help me!!!!

Thanx,
Simone

 

[g. giachella]

"Simone Winkler" <simone.winkler@gmx.at> wrote in message news:<1062000650.772797@news.liwest.at>...

Hello!

I am a newbie trying to perform a simulation with ModelSim...
I did a (very small) project with the Xilinx downloadable webpack - and as i
wanted to simulate it with modelsim, modelsim closed after the following
line:

#vsim -lib work -t 1ps -L xilinxcorelib testbench

the transcript file shows the following:

# Reading D:/Programme/Modeltech_5.5d/win32/../tcl/vsim/pref.tcl

my modelsim version is 5.5d - but i also tried 5.5e. Didn't work!
They always crash after the same line.
I already tried to reinstall everything - no change. I don't know what to do
anymore...please help me!!!!

Thanx,
Simone

Take a look to the file "transcript" in
D:\Programme\Modeltech_5.5d\examples:
before crashing some messages should have been written in it by the
program, clarifying the cause of the crash.


Hope this helps,

G. Giachella