Onkyo Stero Cassette Tape Deck

D

dutch

Guest
I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404 tape
deck. The left playback channel has stopped working. Any help would be
appreciated.

Thanks,
D.E.
 
dutch wrote:
I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404 tape
deck. The left playback channel has stopped working. Any help would be
appreciated.

Thanks,
D.E.
Click to expand...
just in case you havent already done so...you may want to check:
-audio gone only in play, or in record also?
-check headphone sockets and line out - is the sound gone on both these
outputs?
-vu meter working on that channel?

-if none of this helps you'd probably need a scope to trace the path
and find out where the signal is getting lost.
good luck - B
 
"dutch" <lisdon@ameritech.net> wrote in message
news:BuV%e.1$6A4.0@newssvr19.news.prodigy.com...
I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404 tape
deck. The left playback channel has stopped working. Any help would be
appreciated.

Thanks,
D.E.
Click to expand...
Sending the manual to address shown - watch out for those head
wires....they're troublemakers.

Mark Z.
 
I've always wondered how to pronounce "Onkyo" is it like "on key oh" or
"oink ey oh" must be the first because the second just dosen't make any
sense. :)

"Mark D. Zacharias" <spammenot@nonsense.net> wrote in message
news:cDW%e.8230$6e1.5227@newssvr14.news.prodigy.com...
"dutch" <lisdon@ameritech.net> wrote in message
news:BuV%e.1$6A4.0@newssvr19.news.prodigy.com...
I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404
tape deck. The left playback channel has stopped working. Any help
would be appreciated.

Thanks,
D.E.


Sending the manual to address shown - watch out for those head
wires....they're troublemakers.

Mark Z.
Click to expand...
 
I believe it is pronounced "on key oh". Anyway that's how we pronounce it.
Thanks again Mark.
D.E.
"Michael Kennedy" <Mikek400@remthis.comcast.net> wrote in message
news:hOGdnVkdQJnkHt3eRVn-hA@comcast.com...
I've always wondered how to pronounce "Onkyo" is it like "on key oh" or
"oink ey oh" must be the first because the second just dosen't make any
sense. :)

"Mark D. Zacharias" <spammenot@nonsense.net> wrote in message
news:cDW%e.8230$6e1.5227@newssvr14.news.prodigy.com...

"dutch" <lisdon@ameritech.net> wrote in message
news:BuV%e.1$6A4.0@newssvr19.news.prodigy.com...
I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404
tape deck. The left playback channel has stopped working. Any help
would be appreciated.

Thanks,
D.E.


Sending the manual to address shown - watch out for those head
wires....they're troublemakers.

Mark Z.
Click to expand...
 
I felt kinda stupid after I started trying to spell it out phonetically. It
seemed obvious that that was how you say it, but I had allready started a
post so I figured I'd go ahead and ask..
- Mike

"dutch" <lisdon@ameritech.net> wrote in message
news:aC%%e.75$HA.1@newssvr22.news.prodigy.net...
I believe it is pronounced "on key oh". Anyway that's how we pronounce it.
Thanks again Mark.
D.E.
"Michael Kennedy" <Mikek400@remthis.comcast.net> wrote in message
news:hOGdnVkdQJnkHt3eRVn-hA@comcast.com...
I've always wondered how to pronounce "Onkyo" is it like "on key oh" or
"oink ey oh" must be the first because the second just dosen't make any
sense. :)

"Mark D. Zacharias" <spammenot@nonsense.net> wrote in message
news:cDW%e.8230$6e1.5227@newssvr14.news.prodigy.com...

"dutch" <lisdon@ameritech.net> wrote in message
news:BuV%e.1$6A4.0@newssvr19.news.prodigy.com...
I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404
tape deck. The left playback channel has stopped working. Any help
would be appreciated.

Thanks,
D.E.


Sending the manual to address shown - watch out for those head
wires....they're troublemakers.

Mark Z.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top