Old Aussie transformers

"Rheilly Phoull" <rheilly@bigpong.com.au> wrote in message
news:4784ad8f$0$11979$5a62ac22@per-qv1-newsreader-01.iinet.net.au...
"Bruce Varley" <bxvarley@weastnet.com.au> wrote in message
news:13o90pksj8s4a7c@corp.supernews.com...

"Rheilly Phoull" <rheilly@bigpong.com.au> wrote in message
news:47847c82$0$11979$5a62ac22@per-qv1-newsreader-01.iinet.net.au...

"Ross Herbert" <rherber1@bigpond.net.au> wrote in message
news:0vt8o3t3d9a4hepn72p6rmlu0h6lc63gtu@4ax.com...
On Mon, 7 Jan 2008 11:01:48 +0900, "Rheilly Phoull"
rheilly@bigpong.com.au
wrote:

:Thanks for the kind words sunshine!!
:
:Of course I thought that you of all people would know its the mains
tranny
:in a Goldentone bassman40.
:I need the info so I can mebbe substitute something but the cct
diagram
:doesnt give the bias winding voltage, I'm surmising about 30 but would
like
:to make sure.
:
:Incidently the request was made that hopefully someone who had one of
the
:A&R catalogues might read it.


Your circuit diagram might not give the bias voltage but this one does
http://ozvalveamps.elands.com/goldentone/gt1755-1759cct.gif

PT2454 - ORANGE wires 40Vac

Incidentally, lots of Goldentone info here
http://ozvalveamps.elands.com/goldentonemodellist.htm

Ross

Thanks Ross

Yeah, I've been looking around there. Cant quite the exact model but the
cct's are good enough for what I want.

--
Cheers .......... Rheilly P

It's yonks since I've been anywhere near a valve design, I'd forgotten
just how basic a lot of it is. That amp is not much different to the
stuff in my 1964 ARRL handbook under 'modulators'......

AFAIK the 6dq6a's were designated for modulation duty :)
As you say the business end of any power amp is close to that of a
modulator.

--
Cheers .......... Rheilly P

At last, an interesting discussion about electronics, instead of the
Click to expand...
seemingly interminable about, reply to etc. "Phil Allison" threads, complete
with foul-mouthed titling and imagery, and *quotes* of the rubbish from him
which defeat the purpose of the killfiling most of us apply.
 
Elmo wrote:
It's best to ignore people you don't like. Insults just add fuel to the
fire, and whilst it might make you feel good it's just an irritant to
the rest of us that want to discuss electronics.
Click to expand...

Elmo? Who pulled your string? ;-)


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
"Suzy"


** YOU are a TROLLING BLOODY IDIOT

And a PITA, moronic net cop.

PISSSS OFFFFF




........ Phil
 
"Suzy" <not@valid> wrote in message news:47850bfc@dnews.tpgi.com.au...
"Rheilly Phoull" <rheilly@bigpong.com.au> wrote in message
news:4784ad8f$0$11979$5a62ac22@per-qv1-newsreader-01.iinet.net.au...

"Bruce Varley" <bxvarley@weastnet.com.au> wrote in message
news:13o90pksj8s4a7c@corp.supernews.com...

"Rheilly Phoull" <rheilly@bigpong.com.au> wrote in message
news:47847c82$0$11979$5a62ac22@per-qv1-newsreader-01.iinet.net.au...

"Ross Herbert" <rherber1@bigpond.net.au> wrote in message
news:0vt8o3t3d9a4hepn72p6rmlu0h6lc63gtu@4ax.com...
On Mon, 7 Jan 2008 11:01:48 +0900, "Rheilly Phoull"
rheilly@bigpong.com.au
wrote:

:Thanks for the kind words sunshine!!
:
:Of course I thought that you of all people would know its the mains
tranny
:in a Goldentone bassman40.
:I need the info so I can mebbe substitute something but the cct
diagram
:doesnt give the bias winding voltage, I'm surmising about 30 but
would like
:to make sure.
:
:Incidently the request was made that hopefully someone who had one of
the
:A&R catalogues might read it.


Your circuit diagram might not give the bias voltage but this one does
http://ozvalveamps.elands.com/goldentone/gt1755-1759cct.gif

PT2454 - ORANGE wires 40Vac

Incidentally, lots of Goldentone info here
http://ozvalveamps.elands.com/goldentonemodellist.htm

Ross

Thanks Ross

Yeah, I've been looking around there. Cant quite the exact model but
the cct's are good enough for what I want.

--
Cheers .......... Rheilly P

It's yonks since I've been anywhere near a valve design, I'd forgotten
just how basic a lot of it is. That amp is not much different to the
stuff in my 1964 ARRL handbook under 'modulators'......

AFAIK the 6dq6a's were designated for modulation duty :)
As you say the business end of any power amp is close to that of a
modulator.

--
Cheers .......... Rheilly P

At last, an interesting discussion about electronics, instead of the
seemingly interminable about, reply to etc. "Phil Allison" threads,
complete with foul-mouthed titling and imagery, and *quotes* of the
rubbish from him which defeat the purpose of the killfiling most of us
apply.
Click to expand...
Most people don't killfile Philthy - his psychotic rants are too
entertaining.
 
On Jan 9, 10:06 pm, "Alan Rutlidge"
<don't_spam_me_rutli...@iinet.net.au> wrote:
"Elmo" <E...@mo.com> wrote in message

news:47842ca3_1@news.peopletelecom.com.au...



Michael A. Terrell wrote:
Alan Rutlidge wrote:
"Michael A. Terrell" <mike.terr...@earthlink.net> wrote in message
news:47825E8D.F7000D00@earthlink.net...
Russ wrote:
Either that or he's just a nut job, you either gotta just ignore him,
or
learn to giggle at Phil's inevitable ALL CAPS response with lots of
stars
and carriage returns.

Phil is a left handed nut, in a right handed world.
Gee, I never knew Philthy was ambidextrous. ..... 97, 98, 99..change
hands,
1, 2, 3 .......

He's tough, too. He uses steel wool, and never misses a stroke!

It's best to ignore people you don't like. Insults just add fuel to the
fire, and whilst it might make you feel good it's just an irritant to the
rest of us that want to discuss electronics.

And your contribution to this NG over the past year has been? 5 posts, two
of which were cross posts from other NGs.
Stick around a little longer and you'll soon see the reason for developing a
sense of humour to offset the Philthy posts.
If you feel left out, try top posting to a thread Phil has had a hand at.
Bound to attract his attention, then just sit back and await your meteoric
rise up his "shit list". LOL
Click to expand...
Money is starting to ride on the infamous "top 10" list, Phil needs to
publish an aus.electronics version!

Dave.
 
"David L. Jones" <altzone@gmail.com> wrote in message
news:2ad201ea-e4d0-4edd-b7be-8c77ed42d1b5@d4g2000prg.googlegroups.com...

:
: Money is starting to ride on the infamous "top 10" list,
Phil needs to
: publish an aus.electronics version!
:
: Dave.

It would have to be odds on at the moment ;-)

BTW the current number of people that Philthy hates stands
at 6,602,224,174 but every second it is growing a little
bigger.

Cheers TT
 
On Jan 10, 2:05 pm, "TT" <TTencerNOmores...@westnet.com.au> wrote:
"David L. Jones" <altz...@gmail.com> wrote in messagenews:2ad201ea-e4d0-4edd-b7be-8c77ed42d1b5@d4g2000prg.googlegroups.com...

:
: Money is starting to ride on the infamous "top 10" list,
Phil needs to
: publish an aus.electronics version!
:
: Dave.

It would have to be odds on at the moment ;-)

BTW the current number of people that Philthy hates stands
at 6,602,224,174 but every second it is growing a little
bigger.
Click to expand...
That sounds about right:
http://opr.princeton.edu/popclock/

At any one instant I guess it could actually go down a tad too!

Dave.
 
Phil Allison wrote:
"Rheilly Phoull"

Can anyone help me out with specs for the A&R 2454 transformer please??
(Yup a guitar amp :)

** Supply the damn context - you PITA dickwad.

You have a faulty one and want to replace it ???

You have a good one and want to know what it can do?

The number alone is NOT enough info.

Is it a mains or output transformer ???

Describe the guitar amp - what make and model, what output valves are used.

....... Phil
Click to expand...

This thread is 'Old Aussie transformers', not 'Old Aussie trolls' or
'Old Aussie transvestites'


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in
message news:47866981.41B9023@earthlink.net...
: Phil Allison wrote:
: >:
: This thread is 'Old Aussie transformers', not 'Old
Aussie trolls' or
: 'Old Aussie transvestites'
:
:
: --
: Service to my country? Been there, Done that, and I've got
my DD214 to
: prove it.
: Member of DAV #85.
:
: Michael A. Terrell
: Central Florida

Hey Michael read my post third from the top? ;-)

"Hey Philthy the post's title was "Old Aussie Transformers"
**NOT** Old
Tassie Transvestites! So why are you answering?"

BTW "Tassie" is the local colloquialism for Tasmania - a
little rock between Australia and Antarctica. Its
inhabitants are similar to those "Hillbillies" you guys have
:) Due to interbreeding it is an urban myth that these
people are born with two heads - if you get the picture.
Philthy was apparently born (vomited more likely) there.

Regards TT
 
TT wrote:
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in
message news:47866981.41B9023@earthlink.net...
: Phil Allison wrote:
: >:
: This thread is 'Old Aussie transformers', not 'Old
Aussie trolls' or
: 'Old Aussie transvestites'
:
:
: --
: Service to my country? Been there, Done that, and I've got
my DD214 to
: prove it.
: Member of DAV #85.
:
: Michael A. Terrell
: Central Florida

Hey Michael read my post third from the top? ;-)
Click to expand...

I can't let you have ALL the fun. Slamming a troll a day keeps the
boredom away! ;)


"Hey Philthy the post's title was "Old Aussie Transformers"
**NOT** Old
Tassie Transvestites! So why are you answering?"

BTW "Tassie" is the local colloquialism for Tasmania - a
little rock between Australia and Antarctica. Its
inhabitants are similar to those "Hillbillies" you guys have
:) Due to interbreeding it is an urban myth that these
people are born with two heads - if you get the picture.
Philthy was apparently born (vomited more likely) there.
Click to expand...

When I think of Phillis' first appearance on this earth, I see it as
the damaged spawn of a poisonous snake.

Regards TT
Click to expand...

--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
"Michael A. Terrell" <mike.terrell@earthlink.net> wrote in
message news:4786D77D.4B6DBBFB@earthlink.net...
: TT wrote:
: >:
: I can't let you have ALL the fun. Slamming a troll a day
keeps the
: boredom away! ;)
:
:
: > "Hey Philthy the post's title was "Old Aussie
Transformers"
: > **NOT** Old
: > Tassie Transvestites! So why are you answering?"
: >
: > BTW "Tassie" is the local colloquialism for Tasmania - a
: > little rock between Australia and Antarctica. Its
: > inhabitants are similar to those "Hillbillies" you guys
have
: > :) Due to interbreeding it is an urban myth that these
: > people are born with two heads - if you get the picture.
: > Philthy was apparently born (vomited more likely) there.
:
:
: When I think of Phillis' first appearance on this earth,
I see it as
: the damaged spawn of a poisonous snake.
:
: >
: > Regards TT
:
: Michael A. Terrell
: Central Florida

Note how the troll has gone all quite and is sulking in its
den :) Its a great one for dishing it out but it can't
take it for very long.

Cheers TT
 
TT wrote:
Note how the troll has gone all quite and is sulking in its
den :) Its a great one for dishing it out but it can't
take it for very long.
Click to expand...

That happens everytime its sorry hide gets nailed to the wall. :)


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top