Mits WS-55859 Shutdown?

B

Bob Loblaw

Guest
Hi group!

I'm trying to find the book of words/pictures for this set. It belongs to my
client who brought it from the US. Mits in Canada can't supply any docs so
I'm waiting to hear from Mits in the US.
Until then,
Set starts to come on, green led on front lights, HV comes up, then after
about 1-2 secs, shuts down. I don't have to remove AC to reset.
I'm hoping to avoid transporting this set. Any thoughts?
Thanks!
 
Press device and menu buttons for 5 sec simultaneously then count the
flashes from LED for a 2 digit code. Post the results.

Leonard

"Bob Loblaw" <bob@hotmail.not> wrote in message
news:cNPsf.8340$km.8268@edtnps89...
Hi group!

I'm trying to find the book of words/pictures for this set. It belongs to
my client who brought it from the US. Mits in Canada can't supply any docs
so I'm waiting to hear from Mits in the US.
Until then,
Set starts to come on, green led on front lights, HV comes up, then after
about 1-2 secs, shuts down. I don't have to remove AC to reset.
I'm hoping to avoid transporting this set. Any thoughts?
Thanks!
Click to expand...
 
Hello Leonard:



Thank you very much for you help with this.



I had the customer follow these instructions. The code seems to be "22". It
sounds like it keeps repeating.



Kevin.





"Leonard Caillouet" <nospam@noway.com> wrote in message
news:8qUsf.71576$k76.52335@bignews6.bellsouth.net...
Press device and menu buttons for 5 sec simultaneously then count the
flashes from LED for a 2 digit code. Post the results.

Leonard

"Bob Loblaw" <bob@hotmail.not> wrote in message
news:cNPsf.8340$km.8268@edtnps89...
Hi group!

I'm trying to find the book of words/pictures for this set. It belongs to
my client who brought it from the US. Mits in Canada can't supply any
docs so I'm waiting to hear from Mits in the US.
Until then,
Set starts to come on, green led on front lights, HV comes up, then after
about 1-2 secs, shuts down. I don't have to remove AC to reset.
I'm hoping to avoid transporting this set. Any thoughts?
Thanks!
Click to expand...
 
Look for open fuses in the convergence supplies (+/-24v lines). If open you
likely have a bad output IC. If not, check C9A60 on power bd (470 pF 1KV).

Leonard

"Bob Loblaw" <bob@hotmail.not> wrote in message
news:Xfhtf.24836$OU5.6277@clgrps13...
Hello Leonard:



Thank you very much for you help with this.



I had the customer follow these instructions. The code seems to be "22".
It sounds like it keeps repeating.



Kevin.





"Leonard Caillouet" <nospam@noway.com> wrote in message
news:8qUsf.71576$k76.52335@bignews6.bellsouth.net...
Press device and menu buttons for 5 sec simultaneously then count the
flashes from LED for a 2 digit code. Post the results.

Leonard

"Bob Loblaw" <bob@hotmail.not> wrote in message
news:cNPsf.8340$km.8268@edtnps89...
Hi group!

I'm trying to find the book of words/pictures for this set. It belongs
to my client who brought it from the US. Mits in Canada can't supply any
docs so I'm waiting to hear from Mits in the US.
Until then,
Set starts to come on, green led on front lights, HV comes up, then
after about 1-2 secs, shuts down. I don't have to remove AC to reset.
I'm hoping to avoid transporting this set. Any thoughts?
Thanks!
Click to expand...
 
Leonard:

I had checked any fuses I could see the first time out but I missed F9A05
which is in the -24V line. It was open so I have ordered a convergence o/p
IC.
Thanks a lot for the help!!


"Leonard Caillouet" <nospam@noway.com> wrote in message
news:Vmitf.84795$aS5.75408@bignews4.bellsouth.net...
Look for open fuses in the convergence supplies (+/-24v lines). If open
you
likely have a bad output IC. If not, check C9A60 on power bd (470 pF
1KV).

Leonard

"Bob Loblaw" <bob@hotmail.not> wrote in message
news:Xfhtf.24836$OU5.6277@clgrps13...
Hello Leonard:



Thank you very much for you help with this.



I had the customer follow these instructions. The code seems to be "22".
It sounds like it keeps repeating.



Kevin.





"Leonard Caillouet" <nospam@noway.com> wrote in message
news:8qUsf.71576$k76.52335@bignews6.bellsouth.net...
Press device and menu buttons for 5 sec simultaneously then count the
flashes from LED for a 2 digit code. Post the results.

Leonard

"Bob Loblaw" <bob@hotmail.not> wrote in message
news:cNPsf.8340$km.8268@edtnps89...
Hi group!

I'm trying to find the book of words/pictures for this set. It belongs
to my client who brought it from the US. Mits in Canada can't supply
any docs so I'm waiting to hear from Mits in the US.
Until then,
Set starts to come on, green led on front lights, HV comes up, then
after about 1-2 secs, shuts down. I don't have to remove AC to reset.
I'm hoping to avoid transporting this set. Any thoughts?
Thanks!
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top