Looking for plasma panel for 42" NEC PX-42VM2G

P

princo coasters

Guest
Hi!

A mate of mine has an NEC PX-42VM2G (42") tv with a broken panel in it - the
rest was working fine until it got damaged by a cricket ball of all
things!!!

Anyone here have a panel from a scrapped set that might fit it that they'd
like to sell?? or know where to get one? Burn in doesnt matter too much as
it was being used outdoors under a pergola.

CHEERS!!!
 
Anyone??????????

Apparently any NEC 42" panel will do.....


"princo coasters" <princo@makesgoodcoasters.com> wrote in message
news:476d9958$0$6070$afc38c87@news.optusnet.com.au...
Hi!

A mate of mine has an NEC PX-42VM2G (42") tv with a broken panel in it -
the rest was working fine until it got damaged by a cricket ball of all
things!!!

Anyone here have a panel from a scrapped set that might fit it that they'd
like to sell?? or know where to get one? Burn in doesnt matter too much as
it was being used outdoors under a pergola.

CHEERS!!!
Click to expand...
 
princo coasters wrote:
- the rest was working fine until it got damaged by a cricket ball of
all things!!!
Click to expand...
Did someone tell him that the TV is for watching cricket *at home*?
You're not supposed to take it *to* the cricket.

BTW, the panel is about 80% of the raw cost of the TV. Even if you
can find one, it won't be cheap. It's kinda like asking if anyone has
a nice car that's missing a tail-light, because you have a perfect
tail-light and want the rest of the car.

Clifford Heath.
 
yeah i know.......same with tube on a CRT

But no harm in asking.....I have a couple of old hitachis that have good
panels and totally dead electronics - thought someone might be massing a
plasma graveyard......



"Clifford Heath" <no@spam.please.net> wrote in message
news:4786a07b$0$18606$afc38c87@news.optusnet.com.au...
princo coasters wrote:
- the rest was working fine until it got damaged by a cricket ball of
all things!!!

Did someone tell him that the TV is for watching cricket *at home*?
You're not supposed to take it *to* the cricket.

BTW, the panel is about 80% of the raw cost of the TV. Even if you
can find one, it won't be cheap. It's kinda like asking if anyone has
a nice car that's missing a tail-light, because you have a perfect
tail-light and want the rest of the car.

Clifford Heath.
Click to expand...
 
I just picked up one at Auction and it goes backto standby about 10 secs
after turn on I suspect a logic fault, I'm going to take it back as it
suposed to be Ok but maybe your interested in the parts from the Auction
House.
Greg
g-jones@hotmail.com


princo coasters wrote:
Hi!

A mate of mine has an NEC PX-42VM2G (42") tv with a broken panel in it - the
rest was working fine until it got damaged by a cricket ball of all
things!!!

Anyone here have a panel from a scrapped set that might fit it that they'd
like to sell?? or know where to get one? Burn in doesnt matter too much as
it was being used outdoors under a pergola.

CHEERS!!!
Click to expand...


--
Posted at www.Usenet.com.au
 
email sent..........

CHEERS!!!



"Greg" <nospam@usenet.fake> wrote in message news:fptqns$aec$1@aioe.org...
I just picked up one at Auction and it goes backto standby about 10 secs
after turn on I suspect a logic fault, I'm going to take it back as it
suposed to be Ok but maybe your interested in the parts from the Auction
House.
Greg
g-jones@hotmail.com


princo coasters wrote:

Hi!

A mate of mine has an NEC PX-42VM2G (42") tv with a broken panel in it -
the
rest was working fine until it got damaged by a cricket ball of all
things!!!

Anyone here have a panel from a scrapped set that might fit it that
they'd
like to sell?? or know where to get one? Burn in doesnt matter too much
as
it was being used outdoors under a pergola.

CHEERS!!!






--
Posted at www.Usenet.com.au
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top