Identify Wire

[DecadentLinuxUserNumeroUn]

On Thu, 22 Oct 2015 07:37:32 -0400, JW <none@dev.null> Gave us:

On Wed, 21 Oct 2015 00:43:11 -0400 DecadentLinuxUserNumeroUno
DLU1@DecadentLinuxUser.org> wrote in Message id:
tu5e2bh5jc8e3eop30drurst25so7g6nrk@4ax.com>:

I won't give you or your pathetic presumptions a single thought
tomorrow as I go out and perform a field test on my antennas.

What does that consist of? Sitting on a 108" whip?

This isn't Citizen's Band or 10 meter Amateur.

And they are loop antennas which would end up integrated into their
backpacks.

I am surprised you even have the word 'consist' in your vocabulary.

Nice try though, putz.

 

[John S]

On 10/20/2015 11:13 PM, rickman wrote:

On 10/20/2015 4:14 PM, dcaster@krl.org wrote:
On Tuesday, October 20, 2015 at 12:11:07 PM UTC-4,
DecadentLinuxUserNumeroUno wrote:

Still making the retarded claims that I can't figure anything out,
even thought it was elementary knowledge from 35 years ago. You are a
true fucking idiot, child.

I used to design power supplies... For over a decade. I think I know
how to characterize one. And yes, idiot, a battery is a power source.

So did you test your calipers?

And did you find out you were right or wrong?

Are you going to keep baiting him? If so, I'll just kill this thread so
I don't have to read any more of this.

Please do. Your responses do not help but just incite more OT crap.
Trying to be the net cop is not very helpful. But, maybe you didn't
notice that.

 

[DecadentLinuxUserNumeroUn]

On Thu, 22 Oct 2015 10:35:06 -0500, John S <Sophi.2@invalid.org> Gave
us:

On 10/20/2015 11:13 PM, rickman wrote:
On 10/20/2015 4:14 PM, dcaster@krl.org wrote:
On Tuesday, October 20, 2015 at 12:11:07 PM UTC-4,
DecadentLinuxUserNumeroUno wrote:

Still making the retarded claims that I can't figure anything out,
even thought it was elementary knowledge from 35 years ago. You are a
true fucking idiot, child.

I used to design power supplies... For over a decade. I think I know
how to characterize one. And yes, idiot, a battery is a power source.

So did you test your calipers?

And did you find out you were right or wrong?

Are you going to keep baiting him? If so, I'll just kill this thread so
I don't have to read any more of this.


Please do. Your responses do not help but just incite more OT crap.
Trying to be the net cop is not very helpful. But, maybe you didn't
notice that.

You are all pathetic losers, and you just netkkkoped too, idiot.

 

[dcaster@krl.org]

On Friday, October 23, 2015 at 9:01:12 AM UTC-4, cbarn24050 wrote:

make a go no go gauge. Ie.lock your caliper at a suitable gap


---------------------------------------
Posted through http://www.Electronics-Related.com

Good idea. You don't even need calipers. Lock your gage on a feeler gage.

With a lot to do, I would consider making a tapered slot you can slip a bit of wire in. Calibrate the slot using feeler gages. Just mark where a 0.1 feeler gage fits and where a 0.2 mm feeler gage fits. Then run a bit of wire down and you will know if it is 0.1 or 0.2 mm.

Dan

 

[cbarn24050]

I've got lots of single conductor stranded reels of wire to identify. Ho
do
I tell if it's 0.1 or 0.2mm strands? My calipers aren't accurate enough.

All I can think so far is to snip a bit and optically compare.


NT

make a go no go gauge. Ie.lock your caliper at a suitable gap


--------------------------------------
Posted through http://www.Electronics-Related.com

 

[DecadentLinuxUserNumeroUn]

On Fri, 23 Oct 2015 08:01:08 -0500, "cbarn24050"
<109524@Electronics-Related> Gave us:

I've got lots of single conductor stranded reels of wire to identify. How
do
I tell if it's 0.1 or 0.2mm strands? My calipers aren't accurate enough.

All I can think so far is to snip a bit and optically compare.


NT

make a go no go gauge. Ie.lock your caliper at a suitable gap

0.2 mm is a pretty small 'gap'. (as it relates to human fat fingers)

 

On Friday, 23 October 2015 15:54:52 UTC+1, dca...@krl.org wrote:

On Friday, October 23, 2015 at 9:01:12 AM UTC-4, cbarn24050 wrote:

make a go no go gauge. Ie.lock your caliper at a suitable gap


---------------------------------------
Posted through http://www.Electronics-Related.com

Good idea. You don't even need calipers. Lock your gage on a feeler gage.

With a lot to do, I would consider making a tapered slot you can slip a bit of wire in. Calibrate the slot using feeler gages. Just mark where a 0..1 feeler gage fits and where a 0.2 mm feeler gage fits. Then run a bit of wire down and you will know if it is 0.1 or 0.2 mm.

Dan

I'm liking it. But I do now have a proper micrometer on its way.


NT