IC Supplier?

C

Con Saris

Guest
I have a Peavy Bass System amp Model: xminx 110 in for repairs. I need to
find a supplier, in Australia, for an IC type: RC 4558 P. Can anybody help
me?
Thanks in advance
Con
 
Con,

If I'm correct, this is a 8 pin DIP (dual inline pin) IC that is a dual
opamp. It is a very common part, just ask for a generic 4558 at the
electronics supplier of your choice. If you've got a bunch of dead
consumer audio stuff in your junk heap, anything from a boom box to a CD
player will be likely to have one that you can pull.

Regards,
Tim Schwartz
Bristol Electronics


Con Saris wrote:
I have a Peavy Bass System amp Model: xminx 110 in for repairs. I need to
find a supplier, in Australia, for an IC type: RC 4558 P. Can anybody help
me?
Thanks in advance
Con
Click to expand...
 
"Con Saris" bravely wrote to "All" (09 Sep 04 08:01:19)
--- on the heady topic of "IC Supplier?"

CS> From: "Con Saris" <conandbeck@ace.net.au>
CS> I have a Peavy Bass System amp Model: xminx 110 in for repairs. I
CS> need to find a supplier, in Australia, for an IC type: RC 4558 P. Can
CS> anybody help me?
CS> Thanks in advance

Any generic 4558 should do...

A*s*i*m*o*v

.... Integrated Circuit (n): a device used to protect fuses.
 
On Thu, 09 Sep 2004 08:01:19 GMT, "Con Saris" <conandbeck@ace.net.au>
put finger to keyboard and composed:

I have a Peavy Bass System amp Model: xminx 110 in for repairs. I need to
find a supplier, in Australia, for an IC type: RC 4558 P. Can anybody help
me?
Click to expand...
IIRC, an LM358 should substitute OK. Otherwise WES Components (Sydney)
have the KA4558.


- Franc Zabkar
--
Please remove one 's' from my address when replying by email.
 
Thanks to all who replied.Will try WES as I have an account there. Let you
know how I go.
Regards
CON

Con Saris <conandbeck@ace.net.au> wrote in message
news:41400dce@news.comindico.com.au...
I have a Peavy Bass System amp Model: xminx 110 in for repairs. I need
to
find a supplier, in Australia, for an IC type: RC 4558 P. Can anybody
help
me?
Thanks in advance
Con
Click to expand...
 
"Asimov" <Asimov@-removethis-bbs.juxtaposition.dynip.com> wrote in
message
Any generic 4558 should do...
Click to expand...
There are two versions of the 4558.
I believe the P package mentioned will be the 8 pin DIP, but
there is also the "S" package:
_______________________________________________
/ 4558 S |
/ |--------+------------------------------| |
| | | | |
| | |/| |\| |
| | /+|-------| |------|+| |
| | |-< | | | | >-| |
| | | \-|-| | gnd | |-|-/ | |
| | | \| | | ___ | | |/ | |
| | | | | | | | | |
--------------------------------------------------
1 2 3 4 5 6 7 8

created by Andy´s ASCII-Circuit v1.24.140803 Beta www.tech-chat.de


Regards.
LF.
 
HI;

Please don't take this personally, but those ASCII schematics are lame. I have
never seen one work right, the one you did was about as close as it has come.

If there is some program that can view these things right I'd really like to
know about it.

JURB
 
"JURB6006" <jurb6006@aol.com> wrote in message
news:20040927223840.27025.00001381@mb-m13.aol.com...
| HI;
|
| Please don't take this personally, but those ASCII schematics are lame. I
have
| never seen one work right, the one you did was about as close as it has
come.
|
| If there is some program that can view these things right I'd really like
to
| know about it.

Works great. With Outlook Express, just set the newsreader fonts to fixed
pitch - I use Courier New for both.

N
 
Thanks to all that replied. The generic 4558 did do perfectly. Thanks again
Con
L. Fiar <_@_._> wrote in message news:cj8ats$bqn$2@newsg2.svr.pol.co.uk...
"Asimov" <Asimov@-removethis-bbs.juxtaposition.dynip.com> wrote in
message

Any generic 4558 should do...

There are two versions of the 4558.
I believe the P package mentioned will be the 8 pin DIP, but
there is also the "S" package:
_______________________________________________
/ 4558 S |
/ |--------+------------------------------| |
| | | | |
| | |/| |\| |
| | /+|-------| |------|+| |
| | |-< | | | | >-| |
| | | \-|-| | gnd | |-|-/ | |
| | | \| | | ___ | | |/ | |
| | | | | | | | | |
--------------------------------------------------
1 2 3 4 5 6 7 8

created by Andy´s ASCII-Circuit v1.24.140803 Beta www.tech-chat.de


Regards.
LF.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top