Generating 9V @ 10mA - isolated from supply battery

[JERD]

I have a need to generate 9V at 10mA that is totally isolated from a 12V car
battery. That is no common negative connection between the car battery and
the negative of the 9V supply. Any pointers on how I can do this would be
appreciated!

JERD

 

[Dorfus Dippintush]

JERD wrote:

I have a need to generate 9V at 10mA that is totally isolated from a 12V car
battery. That is no common negative connection between the car battery and
the negative of the 9V supply. Any pointers on how I can do this would be
appreciated!

JERD

Buy a 9 volt battery?


Dorfus Dippintush

 

[chris]

JERD wrote:

I have a need to generate 9V at 10mA that is totally isolated from a 12V car
battery. That is no common negative connection between the car battery and
the negative of the 9V supply. Any pointers on how I can do this would be
appreciated!

JERD

Depending on how much you want to spend (low power will be cheaper), you
could use an isolated DC-DC converter eg Farnell sells a Traco TEL
2-1212 9-18V in 12V out 2Watt for about $35.

A linear reg on the output can get you to the 9V since a ready-made 9V
output is less common.

HTH
Chris.

 

[Franc Zabkar]

On Tue, 16 Oct 2007 05:08:22 GMT, "JERD" <jedunk@REMOVEbigpond.net.au>
put finger to keyboard and composed:

I have a need to generate 9V at 10mA that is totally isolated from a 12V car
battery. That is no common negative connection between the car battery and
the negative of the 9V supply. Any pointers on how I can do this would be
appreciated!

JERD

Scrounge a 5V-9V DC-DC converter module from an old 10base2 NIC and
step down the input using an LM7805.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

 

[Andy]

JERD wrote:

I have a need to generate 9V at 10mA that is totally isolated from a 12V car
battery. That is no common negative connection between the car battery and
the negative of the 9V supply. Any pointers on how I can do this would be
appreciated!

JERD

How about using the SRS-1209 listed on this page:

http://www.computronics.com.au/meanwell/srs/

Problem solved for under 8 bucks...........

Andy

 

[David L. Jones]

On Oct 16, 3:08 pm, "JERD" <jed...@REMOVEbigpond.net.au> wrote:

I have a need to generate 9V at 10mA that is totally isolated from a 12V car
battery. That is no common negative connection between the car battery and
the negative of the 9V supply. Any pointers on how I can do this would be
appreciated!

JERD

Farnell have a whole range of isolated DC-DC converters.
102-1604 for example is a 12V to 9V isolated converter @ 111mA.
Bit pricey though.
You could use a cheaper 12V-12V one and use a 9V regulator on the
output.

Alternatively, use a battery.
A D cell battery pack would last several months at 10mA continuous.

Dave.

 

[Mike]

On Tue, 16 Oct 2007 05:08:22 GMT, "JERD" <jedunk@REMOVEbigpond.net.au> wrote:

I have a need to generate 9V at 10mA that is totally isolated from a 12V car
battery. That is no common negative connection between the car battery and
the negative of the 9V supply. Any pointers on how I can do this would be
appreciated!

JERD

The links below shows something close, 9v @2ma, maybe you can beef it up a bit to get 10ma.
http://www.techlib.com/electronics/regulators.html

http://www.techlib.com/craig/craigs_isolated_9_volt_supply.htm


Here's something from National.
http://www.national.com/appinfo/power/files/f17.pdf

Or from Linear Tech
http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1042,C1113,P1549,D2388

If all else fails try googling "isolated flyback".

Mike


"I think, therefore GOD is."
J.P. Moreland

 

[JERD]

"Mike" <nomtrxspam@comcast.net> wrote in message
news:e9jah31jlqcqbor242rcsss9s5uisb1r8i@4ax.com...

On Tue, 16 Oct 2007 05:08:22 GMT, "JERD" <jedunk@REMOVEbigpond.net.au
wrote:

I have a need to generate 9V at 10mA that is totally isolated from a 12V
car
battery. That is no common negative connection between the car battery
and
the negative of the 9V supply. Any pointers on how I can do this would be
appreciated!

JERD


The links below shows something close, 9v @2ma, maybe you can beef it up
a bit to get 10ma.
http://www.techlib.com/electronics/regulators.html

http://www.techlib.com/craig/craigs_isolated_9_volt_supply.htm


Here's something from National.
http://www.national.com/appinfo/power/files/f17.pdf

Or from Linear Tech
http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1042,C1113,P1549,D2388

If all else fails try googling "isolated flyback".

Mike


"I think, therefore GOD is."
J.P. Moreland

Thanks for feedback guys. Most helpful and I now have some options!

JERD