Driver to drive?

On Tue, 20 Nov 2012 13:31:26 -0700, Jim Thompson
<To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:

Along these lines, what would the group recommend for a weatherproof
switch to detect that a yard gate is not closed all the way?
...Jim Thompson
Perhaps it would be more productive to fix or improve the gate closing
mechanism, thus eliminating the need for a weather proof switch and
associated electronics? There is a wide variety of gate closing
mechanisms available, usually based on a linear or rotary spring
mechanism. Many can be retrofitted to an existing gate:
<https://www.google.com/search?hl=en&q=gate+closers&tbm=isch>

Then, there's the cannonball gate closer:
<http://www.hooverfence.com/woodfence/CBP.htm>

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
On Tue, 20 Nov 2012 23:34:28 -0800, Jeff Liebermann <jeffl@cruzio.com>
wrote:

On Tue, 20 Nov 2012 13:31:26 -0700, Jim Thompson
To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:

Along these lines, what would the group recommend for a weatherproof
switch to detect that a yard gate is not closed all the way?
...Jim Thompson

Perhaps it would be more productive to fix or improve the gate closing
mechanism, thus eliminating the need for a weather proof switch and
associated electronics? There is a wide variety of gate closing
mechanisms available, usually based on a linear or rotary spring
mechanism. Many can be retrofitted to an existing gate:
https://www.google.com/search?hl=en&q=gate+closers&tbm=isch

Then, there's the cannonball gate closer:
http://www.hooverfence.com/woodfence/CBP.htm
Actually I want to know that it was opened. Got a Mexican claiming he
worked when he didn't :-(

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice:(480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
 
On Wed, 21 Nov 2012 09:03:34 -0700, Jim Thompson
<To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:

Actually I want to know that it was opened. Got a Mexican claiming he
worked when he didn't :-(
...Jim Thompson
Oh...

Writing software, designing gate alarms, and in general, solving
problems are all easy if you don't worry about error conditions. Real
problem solving is more about dealing with oversights, errors,
anomalies, stupidity, and abuse, than about making it work. Whenever
approaching such things, I ask "What problem are you trying to solve?"
The answer often eliminates a wide assortment of obvious and usually
impulsive solutions.

If you can see the gate from the house, install a security camera and
DVR. I recommend the clear picture of an IP camera over the fuzzy
blurr of a composite video camera. Then you can see who or what
opened the gate. If the Mexican worker is clever, he'll probably
"accidentally" jam the gate open and defeat your scheme. If a camera
and DVR are too elaporate, a PIR motion sensor will detect the Mexican
directly.

However, if you must have a gate switch, the previously recommened
proximity sensors are probably good enough. A burglar alarm type reed
switch and magnet will also work if you keep them away from the metal
gate.

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
On 11/21/2012 8:03 AM, Jim Thompson wrote:
On Tue, 20 Nov 2012 23:34:28 -0800, Jeff Liebermann<jeffl@cruzio.com
wrote:

On Tue, 20 Nov 2012 13:31:26 -0700, Jim Thompson
To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:

Along these lines, what would the group recommend for a weatherproof
switch to detect that a yard gate is not closed all the way?
...Jim Thompson

Perhaps it would be more productive to fix or improve the gate closing
mechanism, thus eliminating the need for a weather proof switch and
associated electronics? There is a wide variety of gate closing
mechanisms available, usually based on a linear or rotary spring
mechanism. Many can be retrofitted to an existing gate:
https://www.google.com/search?hl=en&q=gate+closers&tbm=isch

Then, there's the cannonball gate closer:
http://www.hooverfence.com/woodfence/CBP.htm

Actually I want to know that it was opened. Got a Mexican claiming he
worked when he didn't :-(

...Jim Thompson
You keep adding requirements to the spec.
Often, it's useful to monitor the thing you want monitored.
Monitoring attendance is no guarantee that you actually get work.
Stated another way:
If you can't tell if the work was done, you're paying for work
you don't need.
 
On Tue, 20 Nov 2012 20:42:41 -0800, Robert Baer wrote:

Well,i snooped around their site and could find no way to get or find
that catalog.
No way to get that description, etc.
Dead end.
The best i could find, using MOX as a 3-character selector for part
number, thengetting the PDF for the Max-Mox series,was a one page PDF
named res_maximox.pdf; page labeled 85.
Now i see (only since you pointed it out) the 0.60pF . On the basis of
my calculations, i do not see how it can be that large. I guess i will
have to make a rather sensitive capacitance
measurement device, as DVMs tend to imply the low value i calculated.
I got the catalog from the Ohmite site the same time this thread started.
Took a bit of digging.

Don't you have a proper LCR meter, or bridge? A DMM isn't really suitable
for measuring parasitic capacitance.

A "real" LCR meter, or impedance analyzer, is a must-have for any serious
work. You could use an old Q meter instead.

--
"For a successful technology, reality must take precedence
over public relations, for nature cannot be fooled."
(Richard Feynman)
 
Jim Thompson <To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:
On Tue, 20 Nov 2012 23:34:28 -0800, Jeff Liebermann <jeffl@cruzio.com
wrote:

On Tue, 20 Nov 2012 13:31:26 -0700, Jim Thompson
To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:

Along these lines, what would the group recommend for a weatherproof
switch to detect that a yard gate is not closed all the way?
...Jim Thompson

Perhaps it would be more productive to fix or improve the gate closing
mechanism, thus eliminating the need for a weather proof switch and
associated electronics? There is a wide variety of gate closing
mechanisms available, usually based on a linear or rotary spring
mechanism. Many can be retrofitted to an existing gate:
https://www.google.com/search?hl=en&q=gate+closers&tbm=isch

Then, there's the cannonball gate closer:
http://www.hooverfence.com/woodfence/CBP.htm

Actually I want to know that it was opened. Got a Mexican claiming he
worked when he didn't :-(

...Jim Thompson
Hire people you can trust?
 
On Sun, 11 Nov 2012 15:31:50 -0700, Jim Thompson
<To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:

[snip]
And there's already chit-chat about the Christmas scheduling... we're
celebrating it on December 29 this year to accommodate the college
students and the granddaughter already graduated and working.

And my sensitive mind suspects something coming I didn't expect to
live to see... that _granddaughter_ announcing her engagement ;-)

Maybe I'll make it to great-grandfather :)

...Jim Thompson
My suspicions are correct :)

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice:(480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
 
On Sat, 17 Nov 2012 23:22:43 -0800 (PST), Bill Sloman
<bill.sloman@gmail.com> wrote:

On Nov 18, 6:09 pm, amani.abdulh...@mediu.ws wrote:
?:http://www.mediu.edu.my/ar/admissions/undergraduateprograms
?????? ??????? ???????? ???????? ??????:http://www.mediu.edu.my/ar/admissions/postgraduateprograms

?? ????? ????? ??????? ???????? ????????.http://www.mediu.edu.my/ar/

Funny sort of university that advertises in Arabic script in an
English-language news group.

http://www.mediu.edu.my/help/contact.html

The list of contact addresses is remarkably long, and it's an even
odder sort of university that puts it's enrolment office on the 11th
floor of anything.
Actually, cyber education is becoming a lower-cost alternative in SE
Asia, where infrastructure is overburdened.

If you've ever done courses by correspondence, you'll realise what an
advancement this is in remote education.

If you discount every educational institution with religious
foundations, you'd wipe 80% of western institutions off the map.

RL
 
On Nov 25, 1:37 am, legg <l...@nospam.magma.ca> wrote:
On Sat, 17 Nov 2012 23:22:43 -0800 (PST), Bill Sloman

bill.slo...@gmail.com> wrote:
On Nov 18, 6:09 pm, amani.abdulh...@mediu.ws wrote:
?:http://www.mediu.edu.my/ar/admissions/undergraduateprograms
?????? ??????? ???????? ???????? ??????:http://www.mediu.edu.my/ar/admissions/postgraduateprograms

?? ????? ????? ??????? ???????? ????????.http://www.mediu.edu.my/ar/

Funny sort of university that advertises in Arabic script in an
English-language news group.

http://www.mediu.edu.my/help/contact.html

The list of contact addresses is remarkably long, and it's an even
odder sort of university that puts it's enrolment office on the 11th
floor of anything.

Actually, cyber education is becoming a lower-cost alternative in SE
Asia, where infrastructure is overburdened.

If you've ever done courses by correspondence, you'll realise what an
advancement this is in remote education.

If you discount every educational institution with religious
foundations, you'd wipe 80% of western institutions off the map.
Quite a few of them have managed to transcend their origins.

http://en.wikipedia.org/wiki/Bob_Jones_University

hasn't. Their "science faculty" teaches "young earth creationism" and
doesn't seem to employ any geologists.

The Catholic University in Nijmegen in the Netherlands opened it's
doors in 1923 - though it's now called the Radboud University after an
early bishop of Utrecht

http://en.wikipedia.org/wiki/Radboud_of_Utrecht

http://en.wikipedia.org/wiki/Radboud_University_Nijmegen

but it does seem to have transcended its origins. I doubt if the extra
four years were crucial.

--
Bill Sloman, Sydney
 
On Wed, 24 Oct 2012 22:17:26 -0800, Robert Baer wrote:

See http://www.oil4lessllc.org/HV%20probes/ for updated PDF. Have added
two more scope pictures and modified closing notes.

This shows that the fundamental risetime is faster than 20nSec.
I've just reread the PDF, and beg to disagree.

"Probe 1Gohm-3.jpg" shows the step still rising at about 1.8 microseconds,
where it goes off screen.

Risetime is the time from 10% to 90% *of the final steady value*. Risetime
is at least 1.2 microseconds, possibly more. It doesn't show the final
value.


"Probe 1Gohm-3.jpg" doesn't contain enough information to calculate
risetime. It just shows the initial overshoot and ringing, ie. the
first half-centimeter of the previous photo,some of what you see will be
due to the cable.

What I see is an under-compensated probe.

--
"For a successful technology, reality must take precedence
over public relations, for nature cannot be fooled."
(Richard Feynman)
 
Given your other writings and the generally pejorative outlook towards
your fellow man, why am I surprised to read "mexican?"

Larry

In article <poupa85rdoaadsvuds9g88k7b53k3ubpll@4ax.com>,
Jim Thompson <To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com>
wrote:

On Tue, 20 Nov 2012 23:34:28 -0800, Jeff Liebermann <jeffl@cruzio.com
wrote:

On Tue, 20 Nov 2012 13:31:26 -0700, Jim Thompson
To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com> wrote:

Along these lines, what would the group recommend for a weatherproof
switch to detect that a yard gate is not closed all the way?
...Jim Thompson

Perhaps it would be more productive to fix or improve the gate closing
mechanism, thus eliminating the need for a weather proof switch and
associated electronics? There is a wide variety of gate closing
mechanisms available, usually based on a linear or rotary spring
mechanism. Many can be retrofitted to an existing gate:
https://www.google.com/search?hl=en&q=gate+closers&tbm=isch

Then, there's the cannonball gate closer:
http://www.hooverfence.com/woodfence/CBP.htm

Actually I want to know that it was opened. Got a Mexican claiming he
worked when he didn't :-(

...Jim Thompson
 
"Lawrance A. Schneider" wrote:
Given your other writings and the generally pejorative outlook towards
your fellow man, why am I surprised to read "mexican?"

Because that's who he paid to do the work? Who else was he going to
hire in Arizona to work outside in the heat?
 
On Tue, 27 Nov 2012 13:00:01 -0500, "Michael A. Terrell"
<mike.terrell@earthlink.net> wrote:

"Lawrance A. Schneider" wrote:

Given your other writings and the generally pejorative outlook towards
your fellow man, why am I surprised to read "mexican?"


Because that's who he paid to do the work? Who else was he going to
hire in Arizona to work outside in the heat?
Yep. The white guy I fired for poor workmanship also didn't seem to
want the work.

Don't fret over Lawrance... he can't even spell his own name correctly
;-)

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice:(480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
 
Then why was the post something along these lines??

I've hired two different people to do a task and
it appears that neither even opened a gate necessary
get to where the project is located.

I think that there is more here to explore.

However, at least this time you tried to answer a question; last query
you let others do your bidding. It appears that you frequently want
others to do your work no matter how simple or vapid.

Larry

In article <au2ab8tbi54afgtj5bkf0oh4lomfgmgvdi@4ax.com>,
Jim Thompson <To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com>
wrote:

On Tue, 27 Nov 2012 13:00:01 -0500, "Michael A. Terrell"
mike.terrell@earthlink.net> wrote:


"Lawrance A. Schneider" wrote:

Given your other writings and the generally pejorative outlook towards
your fellow man, why am I surprised to read "mexican?"


Because that's who he paid to do the work? Who else was he going to
hire in Arizona to work outside in the heat?

Yep. The white guy I fired for poor workmanship also didn't seem to
want the work.

Don't fret over Lawrance... he can't even spell his own name correctly
;-)

...Jim Thompson
 
And the gate is steel. Maybe the other way around, a coil whose
inductance changes with gate position?
A simple RF transceiver behind the gate at the right position. When the gate is open, it should block the RF signals. Detect it with Receiver Signal Strength Indicator (RSSI). As of the type of RF, 802.15.4 of course. Just hard code a 64 bit address. No BT pairing and WiFi DHCP headaches.
 
On Thu, 29 Nov 2012 08:49:08 -0500, "Lawrance A. Schneider"
<llaassllaaass@gmail.com> wrote:

Then why was the post something along these lines??

I've hired two different people to do a task and
it appears that neither even opened a gate necessary
get to where the project is located.
There was no claim that the gate was 'never' opened and you have no
idea what the nature of the task(s) is(are), how long it(they) should
take, or how often it(they) should be performed.

I think that there is more here to explore.
It's really none of your business but if you just have to have
something to stick your nose into why don't you 'explore' why some
companies use time clocks.

However, at least this time you tried to answer a question; last query
you let others do your bidding. It appears that you frequently want
others to do your work no matter how simple or vapid.
There is nothing requiring you to participate.

Larry

In article <au2ab8tbi54afgtj5bkf0oh4lomfgmgvdi@4ax.com>,
Jim Thompson <To-Email-Use-The-Envelope-Icon@On-My-Web-Site.com
wrote:

On Tue, 27 Nov 2012 13:00:01 -0500, "Michael A. Terrell"
mike.terrell@earthlink.net> wrote:


"Lawrance A. Schneider" wrote:

Given your other writings and the generally pejorative outlook towards
your fellow man, why am I surprised to read "mexican?"


Because that's who he paid to do the work? Who else was he going to
hire in Arizona to work outside in the heat?

Yep. The white guy I fired for poor workmanship also didn't seem to
want the work.

Don't fret over Lawrance... he can't even spell his own name correctly
;-)

...Jim Thompson
 
On Thu, 29 Nov 2012 08:49:08 -0500, "Lawrance A. Schneider"
<llaassllaaass@gmail.com> wrote:

Then why was the post something along these lines??

I've hired two different people to do a task and
it appears that neither even opened a gate necessary
get to where the project is located.

I think that there is more here to explore.

However, at least this time you tried to answer a question; last query
you let others do your bidding. It appears that you frequently want
others to do your work no matter how simple or vapid.

Larry
---
Congratulations!!!

You top post _and_ flame unnecessarily which, with a total of two
posts in three days to this NG under your belt, must certainly be
close to the record minimum time for proving oneself an asshole.

--
JF
 
On Mon, 22 Sep 2008 01:15:49 GMT, Richard Eich
<richard.eich@domain.invalid> wrote:

jjlarkin@highNOTlandTHIStechnologyPART.com wrote...
On Sat, 20 Sep 2008 23:16:59 -0700 (PDT), Zeke Skarland
zekeskar@yahoo.com> wrote:

On Sep 20, 9:15 am, John Larkin
jjlar...@highNOTlandTHIStechnologyPART.com> wrote:
On Sat, 20 Sep 2008 09:53:49 -0700 (PDT), James Arthur





dagmargoodb...@yahoo.com> wrote:
On Sep 19, 4:49 pm, Paul <Quiller...@gmail.com> wrote:
      "Naturally, the common people don't want war; neither in Russia
nor in England nor in America, nor for that matter in Germany. That is
understood. But, after all, it is the leaders of the country who
determine the policy and it is always a simple matter to drag the
people along, whether it is a democracy or a fascist dictatorship or a
Parliament or a Communist dictatorship. ...voice or no voice, the
people can always be brought to the bidding of the leaders. That is
easy. All you have to do is to tell them they are being attacked, and
denounce the pacifists for lack of patriotism and exposing the country
to danger. It works the same way in any country."

                                       -  Hermann Goring, once a
leading member of
                                                     the Nazi Party

Umm, who got us into that war, and what was his party affiliation?

Cheers,
James Arthur

And what about...

World War I?

Viet Nam? Who started it? Who ended it?

Korea?

The aborted invasion of Cuba?

The Cold War? Who started it? Who ended it?

And Monica's War, of course.

John- Hide quoted text -

- Show quoted text -

It's always intersting to me that rather than deny an obvious truth
(that Bush and co. used EXACTLY the same tactics as the ones Goering
is quoted as describing), Bushco. apoligists distract the discussion.

Why can't you just admit that Bush used these tactics to drag the
country into an unwarranted, wasteful and unproductive war? That's
not so hard. I'm finding that right wing extremists are so locked into
"my party right or wrong" that they can't admit any mistakes by their
leaders.


I belong to no political party. In fact, I belong to no organizations
at all, except for AARP and holding a library card. I was once a
member of the San Francisco Beekeepers' Association, but we had to get
rid of our hive and I let that lapse.

I follow nobody and report to nobody and worship nobody, so I have no
"leaders."

Pbbbhhhttt.


So what if the democrats in the past made similar mistakes - that
doesn't at all detract from the current facts. Why can't you admit it?

Hadn't the US actually been attacked? Or were those airplane crashes
faked? Hadn't Iran and Kuwait been attcked? Wasn't Sadamm directly
sponsoring suicide bombers? And didn't Congress and the UN authorize
the Prez's actions? I don't recall Goring getting such legal backup.

Bush and his crew probably felt that, longterm, planting a democracy
in the heart of the Middle East was a historical necessity. Iraq was
the best candidate, and the WMD thing was the working excuse. If you
want to debate whether this was a moral imperative on the path to
world democracy, or meddling with a soverign country owned and run by
a sadistic madman, let's discuss that. Comparing the USA with Nazi
Germany, or Bush with Goring, is just silly.

We can compare Bush 43 to Hussein, though. Bush 43 has killed a
boatload more Iraqis in the past five years than Hussein would have.
Both Bush and Obama are far more "Terrorist" in nature and have killed
more innocent people than the ones we "call" Terrorists.

Ironic ? Or, intended?

Listen to Alex. Yes, he rants BUT he backs it up and is RIGHT most of
the time.

http://www.infowars.com/
 
On 6 Dec, 00:43, Dave Hazelwood <fedna...@gmail.com> wrote:
On Mon, 22 Sep 2008 01:15:49 GMT, Richard Eich









richard.e...@domain.invalid> wrote:
jjlar...@highNOTlandTHIStechnologyPART.com wrote...
On Sat, 20 Sep 2008 23:16:59 -0700 (PDT), Zeke Skarland
zekes...@yahoo.com> wrote:

On Sep 20, 9:15 am, John Larkin
jjlar...@highNOTlandTHIStechnologyPART.com> wrote:
On Sat, 20 Sep 2008 09:53:49 -0700 (PDT), James Arthur

dagmargoodb...@yahoo.com> wrote:
On Sep 19, 4:49 pm, Paul <Quiller...@gmail.com> wrote:
"Naturally, the common people don't want war; neither in Russia
nor in England nor in America, nor for that matter in Germany. That is
understood. But, after all, it is the leaders of the country who
determine the policy and it is always a simple matter to drag the
people along, whether it is a democracy or a fascist dictatorship or a
Parliament or a Communist dictatorship. ...voice or no voice, the
people can always be brought to the bidding of the leaders. That is
easy. All you have to do is to tell them they are being attacked, and
denounce the pacifists for lack of patriotism and exposing the country
to danger. It works the same way in any country."

- Hermann Goring, once a
leading member of
the Nazi Party

Umm, who got us into that war, and what was his party affiliation?

Cheers,
James Arthur

And what about...

World War I?

Viet Nam? Who started it? Who ended it?

Korea?

The aborted invasion of Cuba?

The Cold War? Who started it? Who ended it?

And Monica's War, of course.

John- Hide quoted text -

- Show quoted text -

It's always intersting to me that rather than deny an obvious truth
(that Bush and co. used EXACTLY the same tactics as the ones Goering
is quoted as describing), Bushco. apoligists distract the discussion.

Why can't you just admit that Bush used these tactics to drag the
country into an unwarranted, wasteful and unproductive war?  That's
not so hard. I'm finding that right wing extremists are so locked into
"my party right or wrong" that they can't admit any mistakes by their
leaders.

I belong to no political party. In fact, I belong to no organizations
at all, except for AARP and holding a library card. I was once a
member of the San Francisco Beekeepers' Association, but we had to get
rid of our hive and I let that lapse.

I follow nobody and report to nobody and worship nobody, so I have no
"leaders."

Pbbbhhhttt.

So what if the democrats in the past made similar mistakes - that
doesn't at all detract from the current facts.  Why can't you admit it?

Hadn't the US actually been attacked? Or were those airplane crashes
faked? Hadn't Iran and Kuwait been attcked? Wasn't Sadamm directly
sponsoring suicide bombers? And didn't Congress and the UN authorize
the Prez's actions? I don't recall Goring getting such legal backup.

Bush and his crew probably felt that, longterm, planting a democracy
in the heart of the Middle East was a historical necessity. Iraq was
the best candidate, and the WMD thing was the working excuse. If you
want to debate whether this was a moral imperative on the path to
world democracy, or meddling with a soverign country owned and run by
a sadistic madman, let's discuss that. Comparing the USA with Nazi
Germany, or Bush with Goring, is just silly.

We can compare Bush 43 to Hussein, though.  Bush 43 has killed a
boatload more Iraqis in the past five years than Hussein would have.

Both Bush and Obama are far more "Terrorist" in nature and have killed
more innocent people than the ones we "call" Terrorists.
Dubbya's invasion of Irak certainly ended up leaving at lot of Iraki's
dead, and many more than even 9/11. They weren't killed in order to
attract attention to a particular cause, so to that extent Dubbya
wasn't actually a terrorist, just a common-or-garden murderous wielder
of military force.

Obama hasn't declared war on anybody new, but his regime's drone
strikes are killing innocent bystanders in the process of eliminating
outlaws who represent a danger to the citizens of every law-abiding
state. Every state has a right and a duty to deal with piracy and
terrorism, but they need to be careful to minimise - and eliminate
where possible - any collateral damage.
I don't like what he's doing, but I don't like what the people he's
getting rid of were doing and seem to have been planning to do, and I
don't know enough about the fine detail to strike any absolute moral
attitude.

<snip>

--
Bill Sloman, Sydney
 
On 07/12/12 15.17, Ivan Shmakov wrote:
BTW, is there an easy way to autodetect the baud rate while
using an AVR UART? (Preferably something that works with
ATmega8, given that those MCU's are such a cheap thing
nowadays.)

There're some ideas (and 8051 code) for that on [1], but I'd
like to know if there could be any better techniques.

TIA.

[1] http://www.pjrc.com/tech/8051/autobaud.html

PS. It seems that I'm slowly drifting into designing my own, AVR-based
Bus Pirate clone. The good news is that the parts for this one
will likely cost under $10... (connectors included.)
(Please respond to news://comp.arch.embedded )

Hi!

I am so "pissed" about RS-232/EIA-232.

After so many years with that "stupid vintage" serial communications
protocol, we still do not have autonegotiation (and auto-baud-detection)
built into the protocol definitions. Why not?

Why have nobody made a request-for-comment about that, then so many
people do not have to bother with a myriad of out-of-bound signals and
in-band signal (xon, xoff) manually.

It is simply incredibly, that after so many decades, you manually has to
find out, how to get it to work.

Please be inspired to release open and free RFC-definitions now, so that
"vintage" serial communication will work smoothly - and with backward
compatibility and of cause with auto "null-modem" functionality.

I am looking forward to, that all out-of-bound signals can automatically
be mapped by software by a series of signal pertubations and response
measurements.

I know I am very demanding, but it ought to be possible? At least the
software should detect and notify the user, that a null-modem cable
connection is required. But it is a bad compromise.

The communications world (and its users) would be much happier with a
full blown software solution.

Let us exterminate 232 jumper boxes. They are the ultimate time eating
stupid solution, that shows we have given up finding a better solution:
http://www.amazon.com/DB25-Female-RS-232-Jumper-Assembly/dp/B000I996EE

Instead we should have a 232 autonegotiation-box/cable, that can be
inserted between no-negotiation 232 equipped equipment.

;-)

Glenn

PS: I know that USB exists...
 

Welcome to EDABoard.com

Sponsor

Back
Top