Bosch drill/driver from Total Tools...

T

Trevor Wilson

Guest
I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63

The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice lunch
bag too.

To put it into perspective, my first Bosch battery drill/driver cost me
$450.00, had 6Nm less torque a slightly lower top speed and was twice
the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a 10mm
chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.
 
Trevor Wilson <trevor@rageaudio.com.au> wrote

I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63

The value for money is astonishing. 30Nm of torque, two speed gearbox and
a SIX YEAR warranty on the tool AND battery! Comes with a nice lunch bag
too.

To put it into perspective, my first Bosch battery drill/driver cost me
$450.00, had 6Nm less torque a slightly lower top speed and was twice the
size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than the
Bosch. The Bosch has a higher top speed and more torque. Only a 10mm chuck
though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.
Click to expand...

Thanks for that, just ordered one.
 
Trevor Wilson <trevor@rageaudio.com.au> wrote

I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63

The value for money is astonishing. 30Nm of torque, two speed gearbox and
a SIX YEAR warranty on the tool AND battery! Comes with a nice lunch bag
too.

To put it into perspective, my first Bosch battery drill/driver cost me
$450.00, had 6Nm less torque a slightly lower top speed and was twice the
size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than the
Bosch. The Bosch has a higher top speed and more torque. Only a 10mm chuck
though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.
Click to expand...

Thanks for that, just ordered one.
 
On 18/08/2021 9:42 am, Rod Speed wrote:
Trevor Wilson <trevor@rageaudio.com.au> wrote

I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

Thanks for that, just ordered one.
Click to expand...

**I\'ve been using mine for just over a year. Every single day. Hasn\'t
missed a beat. Which is more than I can say about the Aldi drill that
the Bosch replaced.
 
On 18/08/2021 9:42 am, Rod Speed wrote:
Trevor Wilson <trevor@rageaudio.com.au> wrote

I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

Thanks for that, just ordered one.
Click to expand...

**I\'ve been using mine for just over a year. Every single day. Hasn\'t
missed a beat. Which is more than I can say about the Aldi drill that
the Bosch replaced.
 
On 18/8/21 9:42 am, Rod Speed wrote:
Trevor Wilson <trevor@rageaudio.com.au> wrote

I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

Thanks for that, just ordered one.
Click to expand...

Me too. Thanks Trevor.
 
On 18/8/21 9:42 am, Rod Speed wrote:
Trevor Wilson <trevor@rageaudio.com.au> wrote

I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

Thanks for that, just ordered one.
Click to expand...

Me too. Thanks Trevor.
 
On 18/8/21 9:42 am, Rod Speed wrote:
Trevor Wilson <trevor@rageaudio.com.au> wrote

I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

Thanks for that, just ordered one.
Click to expand...

Me too. Thanks Trevor.
 
On 17/08/2021 5:09 pm, Trevor Wilson wrote:
I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice lunch
bag too.

To put it into perspective, my first Bosch battery drill/driver cost me
$450.00, had 6Nm less torque a slightly lower top speed and was twice
the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a 10mm
chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.
Click to expand...

I\'ve had an Aldi 18v drill for about a year, it works well enough
although the chuck isn\'t the best. I\'ve had an Aldi 20v impact driver
for over 5 years, it has removed hundreds of old corroded screws and
bolts, and driven just as many. A great bargain.
 
On 17/08/2021 5:09 pm, Trevor Wilson wrote:
I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice lunch
bag too.

To put it into perspective, my first Bosch battery drill/driver cost me
$450.00, had 6Nm less torque a slightly lower top speed and was twice
the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a 10mm
chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.
Click to expand...

I\'ve had an Aldi 18v drill for about a year, it works well enough
although the chuck isn\'t the best. I\'ve had an Aldi 20v impact driver
for over 5 years, it has removed hundreds of old corroded screws and
bolts, and driven just as many. A great bargain.
 
On 17/08/2021 5:09 pm, Trevor Wilson wrote:
I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice lunch
bag too.

To put it into perspective, my first Bosch battery drill/driver cost me
$450.00, had 6Nm less torque a slightly lower top speed and was twice
the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a 10mm
chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.
Click to expand...

I\'ve had an Aldi 18v drill for about a year, it works well enough
although the chuck isn\'t the best. I\'ve had an Aldi 20v impact driver
for over 5 years, it has removed hundreds of old corroded screws and
bolts, and driven just as many. A great bargain.
 
On 18/8/21 9:42 am, Rod Speed wrote:
Trevor Wilson <trevor@rageaudio.com.au> wrote

I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

Thanks for that, just ordered one.
Click to expand...

Me too. Thanks Trevor.
 
On 19/8/21 9:35 am, keithr0 wrote:
On 17/08/2021 5:09 pm, Trevor Wilson wrote:
I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

I\'ve had an Aldi 18v drill for about a year, it works well enough
although the chuck isn\'t the best. I\'ve had an Aldi 20v impact driver
for over 5 years, it has removed hundreds of old corroded screws and
bolts, and driven just as many. A great bargain.
Click to expand...

I\'d buy one but I have enough corded and battery drills here already.
Most recent was a decent Ryobi battery drill that does what I need.

--

Xeno


Nothing astonishes Noddy so much as common sense and plain dealing.
(with apologies to Ralph Waldo Emerson)
 
On 19/8/21 9:35 am, keithr0 wrote:
On 17/08/2021 5:09 pm, Trevor Wilson wrote:
I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

I\'ve had an Aldi 18v drill for about a year, it works well enough
although the chuck isn\'t the best. I\'ve had an Aldi 20v impact driver
for over 5 years, it has removed hundreds of old corroded screws and
bolts, and driven just as many. A great bargain.
Click to expand...

I\'d buy one but I have enough corded and battery drills here already.
Most recent was a decent Ryobi battery drill that does what I need.

--

Xeno


Nothing astonishes Noddy so much as common sense and plain dealing.
(with apologies to Ralph Waldo Emerson)
 
On 19/8/21 9:35 am, keithr0 wrote:
On 17/08/2021 5:09 pm, Trevor Wilson wrote:
I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

I\'ve had an Aldi 18v drill for about a year, it works well enough
although the chuck isn\'t the best. I\'ve had an Aldi 20v impact driver
for over 5 years, it has removed hundreds of old corroded screws and
bolts, and driven just as many. A great bargain.
Click to expand...

I\'d buy one but I have enough corded and battery drills here already.
Most recent was a decent Ryobi battery drill that does what I need.

--

Xeno


Nothing astonishes Noddy so much as common sense and plain dealing.
(with apologies to Ralph Waldo Emerson)
 
On 19/08/2021 10:57 am, Xeno wrote:
On 19/8/21 9:35 am, keithr0 wrote:
On 17/08/2021 5:09 pm, Trevor Wilson wrote:
I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to
chew through 3 batteries (Li-Ion), was twice the size and 50% heavier
than the Bosch. The Bosch has a higher top speed and more torque.
Only a 10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill
8mm holes in bricks, when I couldn\'t be bothered digging out my
hammer drill.

A stunning bargain.

I\'ve had an Aldi 18v drill for about a year, it works well enough
although the chuck isn\'t the best. I\'ve had an Aldi 20v impact driver
for over 5 years, it has removed hundreds of old corroded screws and
bolts, and driven just as many. A great bargain.

I\'d buy one but I have enough corded and battery drills here already.
Most recent was a decent Ryobi battery drill that does what I need.
Click to expand...

**True story:

3 years ago, I began an intensive investigation on 18V tools, with the
view to buying the last set of battery tools I will ever need. I checked
out everyone I knew who had owned the brands I had short-listed (which
was most of them). I attended a client\'s home to do some work and met up
with an old mate who did a similar job. I noted that he was using Ryobi
tools (which were on my short list). I asked him about Ryobi. His response:

\"Trev, I\'ve used them all. Bosch, Milwaukee, DeWalt, AEG, Makita, etc. I
find Ryobi powerful enough to do my kind of work. It\'s been completely
reliable and is very well priced. But, the best thing about Ryobi tools
is that, when you\'re on a job-site with other tradies, none of them will
steal a Ryobi tool. Snobs.\"

LOL!
 
Trevor Wilson wrote:
===============
**True story:

3 years ago, I began an intensive investigation on 18V tools, with the
view to buying the last set of battery tools I will ever need. I checked
out everyone I knew who had owned the brands I had short-listed (which
was most of them). I attended a client\'s home to do some work and met up
with an old mate who did a similar job. I noted that he was using Ryobi
tools (which were on my short list). I asked him about Ryobi. His response:

\"Trev, I\'ve used them all. Bosch, Milwaukee, DeWalt, AEG, Makita, etc. I
find Ryobi powerful enough to do my kind of work. It\'s been completely
reliable and is very well priced. But, the best thing about Ryobi tools
is that, when you\'re on a job-site with other tradies, none of them will
steal a Ryobi tool. Snobs.\"

LOL!
Click to expand...

** I have a Ryobi drill press bought new in 1995 for $165.

https://www.allbids.com.au/c/industrial-tools-building-supplies/tools-hardware/ryobi-5speed-drill-press-1007349

The on/off switch failed about 10 years ago and the plastic depth guide fell apart about the same time.
Otherwise still going strong and capable of heavy and quite precise work.

Used it mostly for drilling extruded heatsinks and making holes for XLRs in die cast boxes with a Hall step drill.



..... Phil
 
Trevor Wilson wrote:
===============
**True story:

3 years ago, I began an intensive investigation on 18V tools, with the
view to buying the last set of battery tools I will ever need. I checked
out everyone I knew who had owned the brands I had short-listed (which
was most of them). I attended a client\'s home to do some work and met up
with an old mate who did a similar job. I noted that he was using Ryobi
tools (which were on my short list). I asked him about Ryobi. His response:

\"Trev, I\'ve used them all. Bosch, Milwaukee, DeWalt, AEG, Makita, etc. I
find Ryobi powerful enough to do my kind of work. It\'s been completely
reliable and is very well priced. But, the best thing about Ryobi tools
is that, when you\'re on a job-site with other tradies, none of them will
steal a Ryobi tool. Snobs.\"

LOL!
Click to expand...

** I have a Ryobi drill press bought new in 1995 for $165.

https://www.allbids.com.au/c/industrial-tools-building-supplies/tools-hardware/ryobi-5speed-drill-press-1007349

The on/off switch failed about 10 years ago and the plastic depth guide fell apart about the same time.
Otherwise still going strong and capable of heavy and quite precise work.

Used it mostly for drilling extruded heatsinks and making holes for XLRs in die cast boxes with a Hall step drill.



..... Phil
 
On 18/8/21 9:42 am, Rod Speed wrote:
Trevor Wilson <trevor@rageaudio.com.au> wrote

I have one of these and have been using it for about a year:

https://www.totaltools.com.au/140089-bosch-12v-2-0ah-drill-driver-kit-0615990l63


The value for money is astonishing. 30Nm of torque, two speed gearbox
and a SIX YEAR warranty on the tool AND battery! Comes with a nice
lunch bag too.

To put it into perspective, my first Bosch battery drill/driver cost
me $450.00, had 6Nm less torque a slightly lower top speed and was
twice the size and weight of the new tool.

It has replaced my 3 year old Aldi drill/driver, which managed to chew
through 3 batteries (Li-Ion), was twice the size and 50% heavier than
the Bosch. The Bosch has a higher top speed and more torque. Only a
10mm chuck though.

Highly recommended for light duty work. Hell, I even used to drill 8mm
holes in bricks, when I couldn\'t be bothered digging out my hammer drill.

A stunning bargain.

Thanks for that, just ordered one.
Click to expand...

Me too. Thanks Trevor.
 
On 19/08/2021 12:03 pm, Phil Allison wrote:
Trevor Wilson wrote:
===============

**True story:

3 years ago, I began an intensive investigation on 18V tools, with the
view to buying the last set of battery tools I will ever need. I checked
out everyone I knew who had owned the brands I had short-listed (which
was most of them). I attended a client\'s home to do some work and met up
with an old mate who did a similar job. I noted that he was using Ryobi
tools (which were on my short list). I asked him about Ryobi. His response:

\"Trev, I\'ve used them all. Bosch, Milwaukee, DeWalt, AEG, Makita, etc. I
find Ryobi powerful enough to do my kind of work. It\'s been completely
reliable and is very well priced. But, the best thing about Ryobi tools
is that, when you\'re on a job-site with other tradies, none of them will
steal a Ryobi tool. Snobs.\"

LOL!


** I have a Ryobi drill press bought new in 1995 for $165.

https://www.allbids.com.au/c/industrial-tools-building-supplies/tools-hardware/ryobi-5speed-drill-press-1007349

The on/off switch failed about 10 years ago and the plastic depth guide fell apart about the same time.
Otherwise still going strong and capable of heavy and quite precise work.

Used it mostly for drilling extruded heatsinks and making holes for XLRs in die cast boxes with a Hall step drill.



.... Phil
Click to expand...

**Ryobi (battery) tools have changed. For the better, IMO. My first
couple of battery drills were Ryobi ones. Japanese made. Gearbox
problems afflicted both. That\'s when I switched to Bosch. I\'ve spoken to
a few owners of the new (Chinese) Ryobi tools and none report any
significant issues. MY drill press is a Kira NSD-13R. I estimate it\'s
age at about 60 ~ 70 years. Works a treat.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top