M
~misfit~
Guest
Franc Zabkar wrote:
--
Shaun.
Thanks Franc,On Wed, 30 Aug 2006 00:25:56 +1200, "~misfit~"
misfit61nz@yahookers.com.au> put finger to keyboard and composed:
Franc Zabkar wrote:
On Mon, 28 Aug 2006 09:56:23 +1200, "~misfit~"
misfit61nz@yahookers.com.au> put finger to keyboard and composed:
Ok, so the main caps I need are low ESR, 3,300uF, 6.3v, 10mm
can, 5mm lead-spacing (25mm high but that's unimportant,
there's room to go higher) electrolytic caps. I can't seem to
source these anywhere in this wonderful country of mine. I've
been told I can get them in 15mm diameter cans which is
unacceptable as there is a row of five tightly satcked together.
Farnell have 10V, 12.5mm dia caps at AU$3.67 + GST:
http://au.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=1144687
Alternatively, WES Components, Ashfield NSW, have 10V, 13mm dia,
low ESR, Hitano EXR series caps, AU$1.15 including GST (trade).
http://www.wescomponents.com/datasheets/EXR.pdf
http://www.wagner.net.au/Catalogue/02_09.pdf
The same series has a 6.3V, 3300uF, 10mm dia cap, but WES don't
list it in their 2003 catalogue, or their Nov 2005 supplement.
- Franc Zabkar
Thanks Franc. However, these caps are really bunched up, I *need*
them to be 10mm. :-(
Search for EXR3300/6.3 at http://www.x-on.com.au/ (Hitano agents)
You can get 10 for $40, or 5 for $36, including $15 freight, GST, and
a $15 penalty for ordering less than $200 worth of goods. :-(
You may be able to avoid the freight cost if you live near one of
their offices:
http://www.x-on.com.au/contact.asp
- Franc Zabkar
--
Shaun.