40KHz Ultrasonic Transducer specifications

J

James

Guest
Can anybody help me with details of the Sanwa SCS401T and SCM401R 40KHz
ultrasonic transducer?

This part is available from Farnell as 143-736 and 143-737, and Maplin as
HY12

I have a matched pair. One marked 40T which seems obvious as the
transmitter but this doesn't show any polarity. Niether connection is
connected to the screen can. Is polarity important for this transducer?

The other must be the receiver but is unmarked, however one pin is obviously
the ground as it's connected to the screened body.

Thankyou.

James
 
"James" <silent_head@hotmail.com> wrote in message
news:d6pfhd$8gt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...
Can anybody help me with details of the Sanwa SCS401T and SCM401R 40KHz
ultrasonic transducer?

This part is available from Farnell as 143-736 and 143-737, and Maplin as
HY12

I have a matched pair. One marked 40T which seems obvious as the
transmitter but this doesn't show any polarity. Niether connection is
connected to the screen can. Is polarity important for this transducer?

The other must be the receiver but is unmarked, however one pin is
obviously the ground as it's connected to the screened body.
Click to expand...
The transmitter can go either way round. So can the receiver, but the case
is intended to be grounded to provide screening; it is working with much
smaller signals than the transmitter.

Leon
 
Many thanks.

James

The transmitter can go either way round. So can the receiver, but the case
is intended to be grounded to provide screening; it is working with much
smaller signals than the transmitter.

Leon
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top