Guest
where can i buy a 125v e3A fuse for my vcr?
tony
tony
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
T
Tim Schwartz
Guest
On 3/10/2018 10:34 PM, ajfaiola@gmail.com wrote:
model of you VCR.
To answer your question these vendors will have a vast array of fuses:
www.mouser.com
www.digikey.com
It is unusual for a fuse to blow just for the heck of it. If it is a
typical glass tube fuse, is the element broken or has it plated the
inside of the glass?
If a second fuse blows right away, there are other issues in your VCR.
Regards,
Tim
250V rating will be fine. You'd be best off mentioning the make andwhere can i buy a 125v e3A fuse for my vcr?
tony
Tony, not really familiar with that designation. First, a 125V or a
model of you VCR.
To answer your question these vendors will have a vast array of fuses:
www.mouser.com
www.digikey.com
It is unusual for a fuse to blow just for the heck of it. If it is a
typical glass tube fuse, is the element broken or has it plated the
inside of the glass?
If a second fuse blows right away, there are other issues in your VCR.
Regards,
Tim
T
Trevor Wilson
Guest
On 11/03/2018 2:59 PM, Tim Schwartz wrote:
**A VCR? Is this guy from Azerbaijan? YIKES!
--
Trevor Wilson
www.rageaudio.com.au
On 3/10/2018 10:34 PM, ajfaiola@gmail.com wrote:
where can i buy a 125v e3A fuse for my vcr?
tony
Tony, not really familiar with that designation. First, a 125V or a
250V rating will be fine. You'd be best off mentioning the make and
model of you VCR.
    To answer your question these vendors will have a vast array of fuses:
www.mouser.com
www.digikey.com
    It is unusual for a fuse to blow just for the heck of it. If it is
a typical glass tube fuse, is the element broken or has it plated the
inside of the glass?
    If a second fuse blows right away, there are other issues in your VCR.
Regards,
Tim
**A VCR? Is this guy from Azerbaijan? YIKES!
--
Trevor Wilson
www.rageaudio.com.au
Guest
On Sunday, 11 March 2018 03:34:16 UTC, ajfa...@gmail.com wrote:
depends on its size & type, and which country you're in.
where can i buy a 125v e3A fuse for my vcr?
tony
depends on its size & type, and which country you're in.
Guest
On Sat, 10 Mar 2018 22:59:20 -0500, Tim Schwartz <tim@bristolnj.com>
wrote:
Since you dont know the cause of the blown fuse, and it's on a obsolete
VCR, just take a common 3AG type of fuse, (of proper current rating),
and put it into one of them cheap automotive fuse holders and put a
small alligator clip on each end. Then just clip across the current fuse
holder and plug in your VCR. If this fuse blows you have other problems
and need to decide if this VCR is worth fixing.If it dont blow and the
VCR works, either locatethe correct fuse, or just solder one of them
automotive fuse holders across the one in the VCR.
Any fuse of the proper current and voltage will work. They just made
those special oddball ones to make more money...
wrote:
On 3/10/2018 10:34 PM, ajfaiola@gmail.com wrote:
where can i buy a 125v e3A fuse for my vcr?
tony
Tony, not really familiar with that designation. First, a 125V or a
250V rating will be fine. You'd be best off mentioning the make and
model of you VCR.
To answer your question these vendors will have a vast array of fuses:
www.mouser.com
www.digikey.com
It is unusual for a fuse to blow just for the heck of it. If it is a
typical glass tube fuse, is the element broken or has it plated the
inside of the glass?
If a second fuse blows right away, there are other issues in your VCR.
Regards,
Tim
Since you dont know the cause of the blown fuse, and it's on a obsolete
VCR, just take a common 3AG type of fuse, (of proper current rating),
and put it into one of them cheap automotive fuse holders and put a
small alligator clip on each end. Then just clip across the current fuse
holder and plug in your VCR. If this fuse blows you have other problems
and need to decide if this VCR is worth fixing.If it dont blow and the
VCR works, either locatethe correct fuse, or just solder one of them
automotive fuse holders across the one in the VCR.
Any fuse of the proper current and voltage will work. They just made
those special oddball ones to make more money...