Where to get MMC cards?

D

David Morrison

Guest
I need some MMC cards for a device that cannot handle cards bigger than
128MB. I've looked on eBay and there are one or two suppliers. The
prices are reasonable ($US7 each), but the postage seems a bit excessive
$US15.95 + $4.50 per card.

Are there any suppliers in Australia, or if someone has an old card or
two, maybe we can come to a deal. (Cards from 16 to 128MB would be ok.)

Thanks

David
 
David Morrison wrote:
I need some MMC cards for a device that cannot handle cards bigger than
128MB. I've looked on eBay and there are one or two suppliers. The
prices are reasonable ($US7 each), but the postage seems a bit excessive
$US15.95 + $4.50 per card.

Are there any suppliers in Australia, or if someone has an old card or
two, maybe we can come to a deal. (Cards from 16 to 128MB would be ok.)

Thanks

David
I have 10 off 16 Mb SD cards if you want them. Note these are formatted
Click to expand...
as FAT12, not FAT16.

Say $2.00 each plus post in AUS.

--
Regards,

Adrian Jansen adrianjansen at internode dot on dot net
Design Engineer J & K Micro Systems
Microcomputer solutions for industrial control
Note reply address is invalid, convert address above to machine form.
 
"David Morrison" <davidmor@excite.com> wrote in message
news:davidmor-F80E36.19353408112007@news.internode.on.net...
I need some MMC cards for a device that cannot handle cards bigger than
128MB. I've looked on eBay and there are one or two suppliers. The
prices are reasonable ($US7 each), but the postage seems a bit excessive
$US15.95 + $4.50 per card.

Are there any suppliers in Australia, or if someone has an old card or
two, maybe we can come to a deal. (Cards from 16 to 128MB would be ok.)

Thanks

David
Click to expand...
Try this place http://www.computeronline.com.au/products.php?C_ID=2&S_ID=343
 
In article <13j712ab1n2hf2a@corp.supernews.com>,
Adrian Jansen <adrian@qq.vv.net> wrote:

David Morrison wrote:
I need some MMC cards for a device that cannot handle cards bigger than
128MB. I've looked on eBay and there are one or two suppliers. The
prices are reasonable ($US7 each), but the postage seems a bit excessive
$US15.95 + $4.50 per card.

Are there any suppliers in Australia, or if someone has an old card or
two, maybe we can come to a deal. (Cards from 16 to 128MB would be ok.)

Thanks

David
I have 10 off 16 Mb SD cards if you want them. Note these are formatted
as FAT12, not FAT16.

Say $2.00 each plus post in AUS.
Click to expand...
Thanks for the offer. We have found, unfortunately, that SD cards do not
work quite the same as MMC cards :-(

David
 
David Morrison wrote:
In article <13j712ab1n2hf2a@corp.supernews.com>,
Adrian Jansen <adrian@qq.vv.net> wrote:

David Morrison wrote:
I need some MMC cards for a device that cannot handle cards bigger than
128MB. I've looked on eBay and there are one or two suppliers. The
prices are reasonable ($US7 each), but the postage seems a bit excessive
$US15.95 + $4.50 per card.

Are there any suppliers in Australia, or if someone has an old card or
two, maybe we can come to a deal. (Cards from 16 to 128MB would be ok.)

Thanks

David
I have 10 off 16 Mb SD cards if you want them. Note these are formatted
as FAT12, not FAT16.

Say $2.00 each plus post in AUS.

Thanks for the offer. We have found, unfortunately, that SD cards do not
work quite the same as MMC cards :-(

David
Click to expand...
Interesting. The SD spec is a superset of the MMC spec, so anything
which works on an MMC *should* word on an SD. But I must admit I only
ever used SD cards in SPI mode, the most basic, where both should work.


--
Regards,

Adrian Jansen adrianjansen at internode dot on dot net
Design Engineer J & K Micro Systems
Microcomputer solutions for industrial control
Note reply address is invalid, convert address above to machine form.
 
In article <13jeug5jri5d0c7@corp.supernews.com>,
Adrian Jansen <adrian@qq.vv.net> wrote:

Interesting. The SD spec is a superset of the MMC spec, so anything
which works on an MMC *should* word on an SD. But I must admit I only
ever used SD cards in SPI mode, the most basic, where both should work.
Click to expand...
Someone told me that the SD cards are thinner than MMC cards. If the
card reader can cope with this, it might be ok. However, some card
readers assume the MMC thickness, and the SD card rattles around inside,
ie, it makes poor contact.

Cheers

David
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top