D
dave
Guest
Does anyone have the pin connections/purpose for a 78HGK voltage regulator? (4
pins + case)
thanks
pins + case)
thanks
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
L
L.
Guest
yeah - will get with you privately........... I have a ? to ask you about
the component as well.
L.
"dave" <dave@nonet.here> wrote in message
news:gir9h014o0s51eqtg8k2p8pgcnqkp4m4ii@4ax.com...
the component as well.
L.
"dave" <dave@nonet.here> wrote in message
news:gir9h014o0s51eqtg8k2p8pgcnqkp4m4ii@4ax.com...
Does anyone have the pin connections/purpose for a 78HGK voltage
regulator? (4
pins + case)
thanks
L
L.
Guest
well, I did reply but didn't notice until it bounced that the addy was no
good.
L.
"dave" <dave@nonet.here> wrote in message
news:gir9h014o0s51eqtg8k2p8pgcnqkp4m4ii@4ax.com...
good.
L.
"dave" <dave@nonet.here> wrote in message
news:gir9h014o0s51eqtg8k2p8pgcnqkp4m4ii@4ax.com...
Does anyone have the pin connections/purpose for a 78HGK voltage
regulator? (4
pins + case)
thanks
D
dave
Guest
On Sat, 7 Aug 2004 13:04:18 -0400, "L." <FFSTA17NO@SPAMACCESS995.COM> wrote:
to keep deleting the 1000's of junk emails I get every day! Can't you ask your
question here? In case it help, the reg. is a 4 pin device + case and was sold
by RS componets (Radiospares) many years ago. I have one from a psu that is
faulty (but not the reg.) so I'd like to use it again. No other hidden motive.
Sorry, but I've been mailbo-mbed so many times that I just can't afford the timewell, I did reply but didn't notice until it bounced that the addy was no
good.
L.
"dave" <dave@nonet.here> wrote in message
news:gir9h014o0s51eqtg8k2p8pgcnqkp4m4ii@4ax.com...
Does anyone have the pin connections/purpose for a 78HGK voltage
regulator? (4
pins + case)
thanks
to keep deleting the 1000's of junk emails I get every day! Can't you ask your
question here? In case it help, the reg. is a 4 pin device + case and was sold
by RS componets (Radiospares) many years ago. I have one from a psu that is
faulty (but not the reg.) so I'd like to use it again. No other hidden motive.
L
L.
Guest
"dave" <dave@nonet.here> wrote in message
news:uipah0ldt7fpbsqap1gf00grvlqevultpe@4ax.com...
0 1
0 2
0 3
0 4
The 0s represent the pins and layout as looking at them........
P1 Voltage input
P2 Voltage output
P3 To voltage adjust
P4 Ground
Hope this helps............
Lou
P..S. Forget the question - you answered it.
news:uipah0ldt7fpbsqap1gf00grvlqevultpe@4ax.com...
The pin out is as follows:On Sat, 7 Aug 2004 13:04:18 -0400, "L." <FFSTA17NO@SPAMACCESS995.COM
wrote:
well, I did reply but didn't notice until it bounced that the addy was no
good.
L.
"dave" <dave@nonet.here> wrote in message
news:gir9h014o0s51eqtg8k2p8pgcnqkp4m4ii@4ax.com...
Does anyone have the pin connections/purpose for a 78HGK voltage
regulator? (4
pins + case)
thanks
Sorry, but I've been mailbo-mbed so many times that I just can't afford
the time
to keep deleting the 1000's of junk emails I get every day! Can't you ask
your
question here? In case it help, the reg. is a 4 pin device + case and was
sold
by RS componets (Radiospares) many years ago. I have one from a psu that
is
faulty (but not the reg.) so I'd like to use it again. No other hidden
motive.
0 1
0 2
0 3
0 4
The 0s represent the pins and layout as looking at them........
P1 Voltage input
P2 Voltage output
P3 To voltage adjust
P4 Ground
Hope this helps............
Lou
P..S. Forget the question - you answered it.
L
L.
Guest
You're quite welcome!
L.
"dave" <dave@nonet.here> wrote in message
news:4ohdh0d98lmosj02eq7t5l7vrr2ukthfea@4ax.com...
L.
"dave" <dave@nonet.here> wrote in message
news:4ohdh0d98lmosj02eq7t5l7vrr2ukthfea@4ax.com...
On Sun, 8 Aug 2004 11:29:17 -0400, "L." <FFSTA17NO@SPAMACCESS995.COM
wrote:
The pin out is as follows:
0 1
0 2
0 3
0 4
The 0s represent the pins and layout as looking at them........
P1 Voltage input
P2 Voltage output
P3 To voltage adjust
P4 Ground
Hope this helps............
It does. Thank you vm.
L
L.
Guest
BTW, I hope you're not in need of one, because they are very hard if not
impossible to find. I could use about 6 of them myself. I may end up
redesigning the power supply I have to make it work in the same manner with
different parts. I started to, but now it's a back burner deal.
L.
"L." <FFSTA17NO@SPAMACCESS995.COM> wrote in message
news:l0ARc.555$191.453@newsread1.dllstx09.us.to.verio.net...
impossible to find. I could use about 6 of them myself. I may end up
redesigning the power supply I have to make it work in the same manner with
different parts. I started to, but now it's a back burner deal.
L.
"L." <FFSTA17NO@SPAMACCESS995.COM> wrote in message
news:l0ARc.555$191.453@newsread1.dllstx09.us.to.verio.net...
You're quite welcome!
L.
"dave" <dave@nonet.here> wrote in message
news:4ohdh0d98lmosj02eq7t5l7vrr2ukthfea@4ax.com...
On Sun, 8 Aug 2004 11:29:17 -0400, "L." <FFSTA17NO@SPAMACCESS995.COM
wrote:
The pin out is as follows:
0 1
0 2
0 3
0 4
The 0s represent the pins and layout as looking at them........
P1 Voltage input
P2 Voltage output
P3 To voltage adjust
P4 Ground
Hope this helps............
It does. Thank you vm.
D
dave
Guest
On Sun, 8 Aug 2004 11:29:17 -0400, "L." <FFSTA17NO@SPAMACCESS995.COM> wrote:
It does. Thank you vm.The pin out is as follows:
0 1
0 2
0 3
0 4
The 0s represent the pins and layout as looking at them........
P1 Voltage input
P2 Voltage output
P3 To voltage adjust
P4 Ground
Hope this helps............