Solid State Relays

B

Bryan

Guest
Hello All:

I wish to construct some solid state relays to control some lighting and
heating. I plan on using a MOC3041/2 Optoisolator which I have in my parts
drawer.

Can anybody recommend a very commonly available and cheap Triac to use. The
requirements are that the triac should be able to supply 4-5 amps at 120
volts.

There is a zillion triacs out there and I am not sure of the correct ones to
use. I guess I should also specify a isolated To220 case as well.

Thanks
 
Look at bta16
"Bryan" <bpl521@shaw.ca> wrote in message
news:kiaKa.276655$3C2.8009988@news3.calgary.shaw.ca...
Hello All:

I wish to construct some solid state relays to control some lighting and
heating. I plan on using a MOC3041/2 Optoisolator which I have in my parts
drawer.

Can anybody recommend a very commonly available and cheap Triac to use.
The
requirements are that the triac should be able to supply 4-5 amps at 120
volts.

There is a zillion triacs out there and I am not sure of the correct ones
to
use. I guess I should also specify a isolated To220 case as well.

Thanks
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top