L
LB
Guest
Any reason for this IC to burn out? Replaced carefully, enough heat sink
grease. Ran one week.
L
grease. Ran one week.
L
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
C
Christian Treldal
Guest
Den Thu, 21 Apr 2005 21:28:37 -0500. skrev LB:
--
Med venlig hilsen
Christian Treldal
Bad caps at it's output. Test with an ESR meter. or simply change them.Any reason for this IC to burn out? Replaced carefully, enough heat sink
grease. Ran one week.
L
--
Med venlig hilsen
Christian Treldal
L
Leonard Caillouet
Guest
Cheap chinese replacements? Where did you get them?
Is there significant dc offset on the inputs? Used too much heat sink
grease?
Leonard
"LB" <lb> wrote in message news:116gob0l0s3h67@corp.supernews.com...
Is there significant dc offset on the inputs? Used too much heat sink
grease?
Leonard
"LB" <lb> wrote in message news:116gob0l0s3h67@corp.supernews.com...
Any reason for this IC to burn out? Replaced carefully, enough heat sink
grease. Ran one week.
L
A
Art
Guest
Agreed, order exact manufacturer replacment, check the associated low value
resistors, and supply voltages.
"Leonard Caillouet" <no@no.com> wrote in message
news:Xr4ae.21744$B93.1960@lakeread06...
resistors, and supply voltages.
"Leonard Caillouet" <no@no.com> wrote in message
news:Xr4ae.21744$B93.1960@lakeread06...
Cheap chinese replacements? Where did you get them?
Is there significant dc offset on the inputs? Used too much heat sink
grease?
Leonard
"LB" <lb> wrote in message news:116gob0l0s3h67@corp.supernews.com...
Any reason for this IC to burn out? Replaced carefully, enough heat sink
grease. Ran one week.
L
L
LB
Guest
I'm pretty sure the replacements were original Sanyo. They looked
identical to the originals in the set, with the date code above the
STK number, and some alphanumeric numbers on the aluminum in the back.
I think the cheap Chinese parts look slightly different.
All the low value resistors check out good too. I'll have to check the
supply voltages when the set is fired up. I don't have the print for
this set, but I would presume the positive and negative rails are the
same voltage.
I'll try to check for DC offset on the inputs. I wouldn't think there
would be any, but I'm only guessing.
On this Mistsubishi both modules are held in place with a single screw
in the center and a piece of spring steel. Maybe I can drill holes and
use more screws.
Thanks for the help.
LB
On Fri, 22 Apr 2005 13:53:18 -0400, "Art" <plotsligt@comcast.net>
wrote:
identical to the originals in the set, with the date code above the
STK number, and some alphanumeric numbers on the aluminum in the back.
I think the cheap Chinese parts look slightly different.
All the low value resistors check out good too. I'll have to check the
supply voltages when the set is fired up. I don't have the print for
this set, but I would presume the positive and negative rails are the
same voltage.
I'll try to check for DC offset on the inputs. I wouldn't think there
would be any, but I'm only guessing.
On this Mistsubishi both modules are held in place with a single screw
in the center and a piece of spring steel. Maybe I can drill holes and
use more screws.
Thanks for the help.
LB
On Fri, 22 Apr 2005 13:53:18 -0400, "Art" <plotsligt@comcast.net>
wrote:
Agreed, order exact manufacturer replacment, check the associated low value
resistors, and supply voltages.
"Leonard Caillouet" <no@no.com> wrote in message
news:Xr4ae.21744$B93.1960@lakeread06...
Cheap chinese replacements? Where did you get them?
Is there significant dc offset on the inputs? Used too much heat sink
grease?
Leonard
"LB" <lb> wrote in message news:116gob0l0s3h67@corp.supernews.com...
Any reason for this IC to burn out? Replaced carefully, enough heat sink
grease. Ran one week.
L