QUCS Users?

[J.B. Wood]

Hello, all. Is anyone currently using the Linux-based Quite Universal
Circuit Simulator freeware (qucs.sourceforge.net) in their design
projects? Thank you for your time and comment. Sincerely,
--
John Wood (Code 5520) e-mail: wood@itd.nrl.navy.mil

Naval Research Laboratory
4555 Overlook Avenue, SW
Washington, DC 20375-5337

 

[JeffM]

J.B. Wood wrote:

Is anyone currently using the Linux-based
Quite Universal Circuit Simulator freeware
(qucs.sourceforge.net) in their design projects?

Mike Engelhardt makes sure that LTspice works under WINE.
http://groups.google.com/group/sci.electronics.cad/browse_frm/thread/eb617edadbe21d81?q=zzz+LTspice-SwitcherCAD-III-now-runs-on-Linux-under-WINE
Most folks use that.

The Fedora Electronic Lab includes QUCS.
http://chitlesh.fedorapeople.org/FEL/download.html
Maybe polling users of that spin will get better results.
http://google.com/search?q=%22+Fedora.Electronic.Lab%22&filter=0&num=100

I note that you haven't indicated if you are taking a popularity poll
or if you have a question about a quirk with the app.

 

[J.B. Wood]

On 10/20/2010 04:28 PM, JeffM wrote:

J.B. Wood wrote:
Is anyone currently using the Linux-based
Quite Universal Circuit Simulator freeware
(qucs.sourceforge.net) in their design projects?

Mike Engelhardt makes sure that LTspice works under WINE.
http://groups.google.com/group/sci.electronics.cad/browse_frm/thread/eb617edadbe21d81?q=zzz+LTspice-SwitcherCAD-III-now-runs-on-Linux-under-WINE
Most folks use that.

The Fedora Electronic Lab includes QUCS.
http://chitlesh.fedorapeople.org/FEL/download.html
Maybe polling users of that spin will get better results.
http://google.com/search?q=%22+Fedora.Electronic.Lab%22&filter=0&num=100

I note that you haven't indicated if you are taking a popularity poll
or if you have a question about a quirk with the app.
Hello, and thanks for the reply. Just curious if some folks had been

using it for a while and might want to comment about
capabilities/limitations and perhaps make a comparison with
commercially-available CAE/CAD packages. I had been using the ViPEC
freeware and found it quite capable but it appears to be an orphan now.
Thanks for the URL. Sincerely,

--
John Wood (Code 5520) e-mail: wood@itd.nrl.navy.mil

Naval Research Laboratory
4555 Overlook Avenue, SW
Washington, DC 20375-5337