Mount a graphical LCD module

T

terry

Guest
Hi,

What is the usual ways to mount a graphical LCD module to the case?

I have thought 2 ways:

1.Use copper rods to mount the LCD to my target MCU board and so there
is no need to screw the LCD to the case.

2. Screw the LCD to the case and use flat cable to connect it to the
target board.

Thanks!
 
"terry" <leonlai2k@yahoo.com> wrote in message
news:9904d48.0411091904.7a79e282@posting.google.com...
Hi,

What is the usual ways to mount a graphical LCD module to the case?

I have thought 2 ways:

1.Use copper rods to mount the LCD to my target MCU board and so there
is no need to screw the LCD to the case.

2. Screw the LCD to the case and use flat cable to connect it to the
target board.
Click to expand...

Here is an example of an DIL LCD fitted to a PCB just using the sockets and
retained by the case lid.

http://home.netsurf.de/gernot.fink/gpi.jpg

http://home.netsurf.de/gernot.fink/gpa.jpg

Main problem is water/dust entry. It's also possible to get a bezel.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top