magnetic field

Watson A.Name - "Watt Sun, the Dark Remover" wrote:

First off, electrons aren't 'stationary'. They're always moving. And
then you can't 'observe' them because the act of observing them disturbs
them. It's the old Heisenberg's Uncertainty Principle.
Click to expand...
The old "disturbance model" of quantum mechanics? That's been know to be
wrong almost since the dawn of the subject.

Sylvia.
 
On Wed, 29 Sep 2004 04:26:20 -0700, "Watson A.Name - \"Watt Sun, the
Dark Remover\"" <NOSPAM@dslextreme.com> wrote:


Y'see what I mean.. :-/
Click to expand...
---
Ummm... no.

Care to expound on it?

--
John Fields
 
If your auto radio has an external input, this can be done. If not,
there are some very good quality stereo FM modulators around that are
portable. I have seen these for about $20 and up. I found that the
quality goes up with the price.

--

Jerry G.
======

"Mike Smith" <msmith@erinet.com> wrote in message
news:10lils72a6t6jcb@corp.supernews.com...
Hi all,
I don't know if this is the right forum, but here goes: Would it not be
possible to connect the mp3 player phones output to you car stereo
(assuming
one has an input jack), rather than using the funky, squeaky, jamming-up
tape player cartridge POS that's available now?

Mike in Dayton
 
"Rob" <t1_dsp-news1a@yahoo.com.au> wrote in message
news:4588f7de.0409282351.40537491@posting.google.com...
Looking for source code or drivers for talking to CAN J1939 devices /
network. Operating systems include Winxx and Linux.
Click to expand...
Perhaps...
http://home.wanadoo.nl/arnaud/
 
Graeme wrote:
"philo" <philo@privacy.net> wrote in message
news:2rtpdpF1ea4pvU1@uni-berlin.de...

Graeme wrote:

Hi All
Simple (maybe) question. I've got a tin/lead plated circuit board, and

some

components which have plated leads without lead. Is it possible to make

a

good solder joint between these two? If so, what sort of solder should

be

used (leaded, unleaded)?
TIA.



for all electrical work you need to use *rosin* core solder...

it's ok to use the standard lead/tin solder

but silver solder should also be ok


I thank you both for your comments. Are there any web-based reports that
investigate this process?
Click to expand...
here is one of many links:

http://www.epemag.wimborne.co.uk/solderfaq.htm#howto

btw: be sure to use good ventilation

and to wash you hands well with soap and water after handling lead
 
"dirk" <nothin.here@spamblok.net> wrote in message
news:hKW4d.255942$sS.13360191@phobos.telenet-ops.be...
any condition will do.

ddjazz at hotmail dot com
Click to expand...
Thought the flukes come with a life time guarantee

Bill
 
philo <philo@privacy.net> wrote:

btw: be sure to use good ventilation

and to wash you hands well with soap and water after handling lead
Click to expand...
Why?
 
Because breathing lead solder fumes is bad. Also, eating lead is bad.

BRW

On Thu, 30 Sep 2004 00:13:08 +0100, nospam <nospam@nospam.invalid>
wrote:

philo <philo@privacy.net> wrote:

btw: be sure to use good ventilation

and to wash you hands well with soap and water after handling lead

Why?
Click to expand...
 
Sorry for posting it in the wrong group. But, to answer your question: I
want to detect when the other party hangs up, on the other end of the line.
My answering machine seems to do this, and stops recording on its cassette
immediately after the party hangs up.

I'll try posting it there.

-Zach

"Watson A.Name - "Watt Sun, the Dark Remover"" <NOSPAM@dslextreme.com> wrote
in message news:10ll6ujmcc5kt05@corp.supernews.com...

First off, you should be asking this on the appropriate newsgroup,
comp.dcom.telecom.tech. You're not telling us which party is "hanging
up". If you meant the far end, then most modern telephone switches
don't send anything back to you when the calling party disconnects.
Click to expand...
 
John posted:

<< Dbowey wrote:
John posted:

We don't do things here like you do in the lower forty-eight. People
have lives to live. We don't go around sniffing other people's shorts
just for fun. That's for dogs and politicians, not for Alaskans. Someone
asks, I'll tell them what I'm doing because there's nothing wrong about it.


I don't see a smiley face, so I guess you are serious.

Well actually, you are seriously full of crap. As an ex-resident of AK back
when it was still a Territory, and with continued ties to AK, I am qualified
to
state that you have no right to assume you can represent most Alaskans.

Don
Click to expand...
Just couldn't wait to jump on it, could you? At least 'Im still here.
Now, how about an answer to the question I posted initially? You have
one, or are you just a troll?
I don't believe there is an easy answer. If the cable transported only a few
channels, you could
run the signal into a mixer (multiplier) and transmit it to a receiver where
you would block convert the signal back to the original frequencies. With 50
or more channels, you would need to use a *much* higher frequency and much more
RF power in order to maintain a reasonable signal-to-noise ratio.

Don
KAHI 54
 
Ioannis Vranos wrote:

My MP3 player has a battery indicator which indicated the newly charged
one as half-full. I suppose it measures voltage, so I do not care so
much about it.
Click to expand...

But unfortunately it just gave me a low battery indication and stopped
playing after 2-3 hours of operation only...


Are there rechargeable batteries suitable for this kind of stuff?



--
Ioannis Vranos

http://www23.brinkster.com/noicys
 
"Martin" <margrove@pgen.net> wrote in message
news:c20d037a.0409291410.1ace3e9e@posting.google.com...
Does anyone know whether a PCI card exists that will act as an audio
active crossover network? Ie it should accept a digital input from a
PC soundcard then be capable of splitting it digitally into a number
of frequency bands (at least 3), with user definable cut off
frequencies and attenuation rates. Obviously seperate outputs should
be available for each frequency band per channel. Or is it pie in the
sky? ;=}
Martin
Click to expand...
Sounds like an interestng idea for Creative - just think how many speakers
they would sell to go with it..
 
"FEerguy9" <feerguy9@cs.com> wrote in message
news:20040928153727.13199.00001308@mb-m28.news.cs.com...

How do you reconcile these two?

bECAUSE i AM BASICAllY RIGHT+. eER WIlL HAPPEN!!

Ah, so now you're right simply by declaring yourself
to be. How interesting. Why don't you simply
declare yourself God, and change the laws of physics
to permit your silly notion to work, then?
Click to expand...
i AM NOT gOD+.

wERE i gOD, i WOUld sureLY FIX MY COMPUTER+.


fRANK
 
"philo" <philo@privacy.net> wrote in message
news:2s30j9F1eljo3U2@uni-berlin.de...
Bennet Williams wrote:
Because breathing lead solder fumes is bad. Also, eating lead is bad.


correct...
lead is toxic
Click to expand...
How many "Lead Sniffers" or "Lead Eaters" do you know, and what happened to
them?

IN the over forty years I have used lead bearing solder, I have never seen or
heard of anyone affected by the stuff. We all learned how to handle it.
 
A nice FAQ that I found on the web and contains useful information:

http://www.batterylogic.co.uk/faq.htm



--
Ioannis Vranos

http://www23.brinkster.com/noicys
 
FEerguy9 puts out:
nOT A WORD DO i UNDERSTAND+.
Click to expand...
This proves you're nothing.

YAAT. HAND.

[]s
--
Chaos MasterŽ, posting from Brazil.

"People told me I can't dress like a fairy.
I say, I'm in a rock band and I can do what the hell I want!"
-- Amy Lee

The Evanescen(t/ce) HP: http://marreka.no-ip.com

EER: MPG.1bc42bc0f7212f3989762@news.individual.net
 
FEerguy9 puts out:

i AM NOT gOD+.

wERE i gOD, i WOUld sureLY FIX MY COMPUTER+.
Click to expand...
Please fix your computer by turning off your computer.


--
Chaos MasterŽ, posting from Brazil.

"People told me I can't dress like a fairy.
I say, I'm in a rock band and I can do what the hell I want!"
-- Amy Lee

The Evanescen(t/ce) HP: http://marreka.no-ip.com

EER: MPG.1bc42bc0f7212f3989762@news.individual.net
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top