handheld dictionary help

S

shmitnols

Guest
I would like to build an embedded system, I have limited experience
with an hc11 microcontroller, but I have good c,c++,java,assembly
skills. I would like to build a hand held electronic dictionary. I
want an lcd screen(2-3 lines) connected to thin "flimsy" keypad,
total
size of the system approximately 4"x6",and it can be run by battery
or possibly solar.. and I would like to mass produce these for as
cheap as possible(under 5 dollars?). That is the final goal. What I
need is guidance as to starting this project. As of right now I have
nothing. I do not know what hardware to buy, where to buy it, and how
to set it up to
begin programming on it. I need advice to help get the ball rolling.
any comments or suggestions would be awesome.. I have a breadboard,
would like to buy the minimum amount of hardware necessary, set it up
and program it on breadboard, then from there convert it into final
project. Since this will be acting as a dictionary, I may have up to
5000 words stored or more...
 
You may want to consider looking at Microchip PICS. They are friendly,
easy to use, simple microcontrollers with relatively inexpensive
development tools. On top of all of this, you will need access to
tools, such as an oscilloscope and a logic analyzer, probably as a
minimum.

Aside from the microcontroller, to design a system as complex as you
describe will require a broad understanding of both analog and digital
electronics. Obviously this is no simple task. I would recommend
that you start with a book on electronic projects, geared towards your
present skill level, and work up from there.
 
I would like to build a hand held electronic dictionary.
shmitnols
Start out with one of these:
http://groups.google.com/group/sci.electronics.design/browse_frm/thread/44ad1caf9218d30e/c51217ff0f4428bf?q=looking-for-*-microprocessor-trainer+*-bucks+*-AVR-butterfly+3v3-supply

http://groups.google.com/group/sci.electronics.basics/browse_frm/thread/32e180c24bba32c0/86a861146fcbc76b?q=AVR+*-C-compiler-is-free+*-GCC+*-*-*-PIC-*-*-programmed-in-assembler-*-because-the-assembler-is-free+*-don't-need-*-special-programmers+*-AVR-*-*-programmed-in-C+PIC-assembler-*-*-*-easy-to-learn+AVR-assembler-*-*-*-*-*-involved
 

Welcome to EDABoard.com

Sponsor

Back
Top