erotic vibrator

K

Kim Cole

Guest
my husband was trying to use my vibrator and he broke it.
Should I also post the model number of the vibrator if I can find it? Or will the size of my cunt be just as helpful?
 
Was this a 6 volt or 12 volt vibrator, and did it have 4 or 6 pins? You
should be able to come up with a solid state replacement multivibrator
circuit.

Kim Cole wrote:

my husband was trying to use my vibrator and he broke it.
Should I also post the model number of the vibrator if I can find it?
 
"Kim Cole" <thekimmy@positiveatheist.com> wrote in message
news:200307300900.FAA28460@orion.besthost1.com...
my husband was trying to use my vibrator and he broke it.
Should I also post the model number of the vibrator if I can find it? Or
will the size of my cunt be just as helpful?

Was it the heavy duty model with a kick start, or the normal model with a
built in 3 1/2 horse trolling moter?
 
more important then the model #
What size is this one?
Length, exact dimensions are required.(fee is always based per inch of
length and circumference)
MTBF generally is about 50 serious plays - if you are beyond the 50 the
service fees become terribly expensive!
(anyone else service you besides the toy and hubby?)

"Kim Cole" <thekimmy@positiveatheist.com> wrote in message
news:200307300900.FAA28460@orion.besthost1.com...
my husband was trying to use my vibrator and he broke it.
Should I also post the model number of the vibrator if I can find it? Or
will the size of my cunt be just as helpful?
 
Kim Cole wrote:

my husband was trying to use my vibrator and he broke it.
Should I also post the model number of the vibrator if I can find it? Or
will the size of my cunt be just as helpful?

We can't help you without a make, model, serial number, color, length,
texture, diameter, brand of batteries, and how many times it's been used and
where.
 
My diagnosis sight unseen, is that you have the "Super-size" version,
and therefore have posted your question in the wrong group. Try
sci.diesel.repair.

On Wed, 30 Jul 2003 15:14:37 -0400, "anon"
<recyclecomputer@@&hotmail.com> wrote:

more important then the model #
What size is this one?
Length, exact dimensions are required.(fee is always based per inch of
length and circumference)
MTBF generally is about 50 serious plays - if you are beyond the 50 the
service fees become terribly expensive!
(anyone else service you besides the toy and hubby?)

"Kim Cole" <thekimmy@positiveatheist.com> wrote in message
news:200307300900.FAA28460@orion.besthost1.com...
my husband was trying to use my vibrator and he broke it.
Should I also post the model number of the vibrator if I can find it? Or
will the size of my cunt be just as helpful?
 
You'll need to bring it into our authorised service centre, as it needs to
be flash tested for safety reasons.

Unfortunately, it's one of those modern devices that won't work without the
rest of the system, so you will need to book yourself in at the same time to
make sure that all channels and functions are working.

If you have a tape that shows the fault, this would speed up the diagnostic
process.

These devices are labour-intensive and require lots of soak testing, so
prepare yourself for a big surprise (when you get the bill).

You can park near our rear entrance - we are just off High St.

Finally, full payment is required prior to repair, as we have been shafted
by previous customers.



"Kim Cole" <thekimmy@positiveatheist.com> wrote in message
news:200307300900.FAA28460@orion.besthost1.com...
my husband was trying to use my vibrator and he broke it.
Should I also post the model number of the vibrator if I can find it? Or
will the size of my cunt be just as helpful?
 
On Wed, 30 Jul 2003 17:33:02 GMT, "Deke" <denkellNOSPAM@starband.net>
wrote:

"Kim Cole" <thekimmy@positiveatheist.com> wrote in message
news:200307300900.FAA28460@orion.besthost1.com...
my husband was trying to use my vibrator and he broke it.
Should I also post the model number of the vibrator if I can find it? Or
will the size of my cunt be just as helpful?
Just send a picture of your cunt and we'll figure out what to do with
it.
 
For failed electronics of this nature, what would be most helpful is the
voltage specification. Alkaline or lead-acid batteries? Mains? 3-Phase?
Gas/Diesel? Most cheap battery-driven knock-offs have a rail voltage of
between 1.5V ~ 4.5V, while quality brands (buy American!) go
considerably higher. My ex-GF's used 7 "D" cells in series (she was a
roomy old bitch!!) for 10.5V, although models which use inductors to
reach upwards of 25 KV are also available (common in BDSM and
information-acquisition applications).


Kim Cole wrote:
my husband was trying to use my vibrator and he broke it.
Should I also post the model number of the vibrator if I can find it? Or will the size of my cunt be just as helpful?
 
Bill Webb (spam@cexx.org) writes:
For failed electronics of this nature, what would be most helpful is the
voltage specification. Alkaline or lead-acid batteries? Mains? 3-Phase?
Gas/Diesel?
Don't forget steam powered. That's where Steely Dan got their name.

Michael
 
ROFL!

BTW... beware any woman who keeps her 'toy' in a Faraday cage when not
in use.


Michael Black wrote:

Don't forget steam powered. That's where Steely Dan got their name.

Michael
 
Bill Webb wrote:
ROFL!

BTW... beware any woman who keeps her 'toy' in a Faraday cage when not
in use.

Michael Black wrote:

Don't forget steam powered. That's where Steely Dan got their name.

Michael
Especially if you are the toy! <g>
Regards
Lee


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----
 

Welcome to EDABoard.com

Sponsor

Back
Top