Efinix and their new Trion FPGAs -

B

Brane2

Guest
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?
 
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

They do seem to be a bit of "me too" in the FPGA arena. Not only are their parts about the same as others already in the field and about the same pricing, they are using all the same BGA type of packaging and the same sort of hard IP. I see the smallest part in the family doesn't have any LVDS I/O..

The main complaint I have with them is the near total use of BGA packages. My needs are typically for something like a QFN88 or a QFP100. The QFP144 won't even fit on my board, lol.

The T8F81C2 in the BGA81 package is certainly affordable at $5.50. I just wish it had something like a CM0/CM3 processor on the die. I'm going to keep watching Gowin and AGM.

--

Rick C.

- Get 1,000 miles of free Supercharging
- Tesla referral code - https://ts.la/richard11209
 
On 11/29/19 10:06 AM, Rick C wrote:
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

They do seem to be a bit of "me too" in the FPGA arena. Not only are their parts about the same as others already in the field and about the same pricing, they are using all the same BGA type of packaging and the same sort of hard IP. I see the smallest part in the family doesn't have any LVDS I/O.

The main complaint I have with them is the near total use of BGA packages. My needs are typically for something like a QFN88 or a QFP100. The QFP144 won't even fit on my board, lol.

The T8F81C2 in the BGA81 package is certainly affordable at $5.50. I just wish it had something like a CM0/CM3 processor on the die. I'm going to keep watching Gowin and AGM.

I think one reason for the predominance of BGA packages is that they are
a lot smaller than non-BGA packages, even with a lot less pins. Yes,
there are board cost/assembly issues with BGAs, but my guess is that
there isn't enough demand at the very small end to make it worth the
tooling cost to make them.
 
On Friday, November 29, 2019 at 12:49:13 PM UTC-5, Richard Damon wrote:
On 11/29/19 10:06 AM, Rick C wrote:
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

They do seem to be a bit of "me too" in the FPGA arena. Not only are their parts about the same as others already in the field and about the same pricing, they are using all the same BGA type of packaging and the same sort of hard IP. I see the smallest part in the family doesn't have any LVDS I/O.

The main complaint I have with them is the near total use of BGA packages. My needs are typically for something like a QFN88 or a QFP100. The QFP144 won't even fit on my board, lol.

The T8F81C2 in the BGA81 package is certainly affordable at $5.50. I just wish it had something like a CM0/CM3 processor on the die. I'm going to keep watching Gowin and AGM.


I think one reason for the predominance of BGA packages is that they are
a lot smaller than non-BGA packages, even with a lot less pins. Yes,
there are board cost/assembly issues with BGAs, but my guess is that
there isn't enough demand at the very small end to make it worth the
tooling cost to make them.

Yes, I'm sure of that, but there are companies selling FPGAs in 100QFP. Now there are a couple of start ups using that package as well as the 88QFN. If you aren't building cell phones, these are alternatives providing a lower system cost not to mention ease of inspection and rework.

In particular AGM has 6 kLUT and a 250 MHz CM3 in a 100QFP (if you can buy it) and Gowin has a 4 kLUT part in both a 100QFP and the 88QFN for under $3..40 (a part with a CM3 processor will be out in Q1).

--

Rick C.

+ Get 1,000 miles of free Supercharging
+ Tesla referral code - https://ts.la/richard11209
 
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

I dug into the parts a bit more and if I bite the bullet with the package, the T8 looks pretty good. But it has some limitations.

There is 12kB of block RAM available in widths that include x5 and multiples. A bit odd, but potentially useful. So the RAM could be 12 kW of 10 bits. As instruction memory that can be useful. I just wish it had a bit more memory.

In the 81 pin BGA package it has only 1 of the five PLLs available and that is "simple" whatever that means. That package only has 55 GPIOs. Many of the I/O features are not available in the smaller packages. The 144QFP is a monster and isn't of much use to me.

Packaging is a PITA.

--

Rick C.

-- Get 1,000 miles of free Supercharging
-- Tesla referral code - https://ts.la/richard11209
 
On Tuesday, December 3, 2019 at 3:25:45 PM UTC-5, Rick C wrote:
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

I dug into the parts a bit more and if I bite the bullet with the package, the T8 looks pretty good. But it has some limitations.

There is 12kB of block RAM available in widths that include x5 and multiples. A bit odd, but potentially useful. So the RAM could be 12 kW of 10 bits. As instruction memory that can be useful. I just wish it had a bit more memory.

In the 81 pin BGA package it has only 1 of the five PLLs available and that is "simple" whatever that means. That package only has 55 GPIOs. Many of the I/O features are not available in the smaller packages. The 144QFP is a monster and isn't of much use to me.

Packaging is a PITA.

I tried accessing the web site to get pricing at their store. After days they have not approved my login so I can visit their store. A sales person sent me an email but has not responded to my reply. Strange. I was hoping to get pricing info on some larger parts.

--

Rick C.

-+ Get 1,000 miles of free Supercharging
-+ Tesla referral code - https://ts.la/richard11209
 
On 05/12/2019 03:16, Rick C wrote:
On Tuesday, December 3, 2019 at 3:25:45 PM UTC-5, Rick C wrote:
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

I dug into the parts a bit more and if I bite the bullet with the package, the T8 looks pretty good. But it has some limitations.

There is 12kB of block RAM available in widths that include x5 and multiples. A bit odd, but potentially useful. So the RAM could be 12 kW of 10 bits. As instruction memory that can be useful. I just wish it had a bit more memory.

In the 81 pin BGA package it has only 1 of the five PLLs available and that is "simple" whatever that means. That package only has 55 GPIOs. Many of the I/O features are not available in the smaller packages. The 144QFP is a monster and isn't of much use to me.

Packaging is a PITA.

I tried accessing the web site to get pricing at their store. After days they have not approved my login so I can visit their store. A sales person sent me an email but has not responded to my reply. Strange. I was hoping to get pricing info on some larger parts.
They only approved my login after a fairly stroppy email. I think that
currently Efinix fail all tests for being ready to do business.

I can't understand the package thing - I thought that Microchip had
proved that getting design-ins was key to getting business and making it
easy to get started was the key to getting design-ins.

Sub 1mm pitch BGA packages add huge amounts of cost right at the very
front end of a project - often the bit when you're using the tea and
coffee budget to try and get the bosses interested. But 0.5mm pitch TQFP
and QFN can be hand soldered. I'm amazed that the aspiring newcomers to
the FPGA market aren't more actively filling that gap.

MK
 
On Thursday, December 5, 2019 at 3:47:35 AM UTC-5, Michael Kellett wrote:
On 05/12/2019 03:16, Rick C wrote:
On Tuesday, December 3, 2019 at 3:25:45 PM UTC-5, Rick C wrote:
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

I dug into the parts a bit more and if I bite the bullet with the package, the T8 looks pretty good. But it has some limitations.

There is 12kB of block RAM available in widths that include x5 and multiples. A bit odd, but potentially useful. So the RAM could be 12 kW of 10 bits. As instruction memory that can be useful. I just wish it had a bit more memory.

In the 81 pin BGA package it has only 1 of the five PLLs available and that is "simple" whatever that means. That package only has 55 GPIOs. Many of the I/O features are not available in the smaller packages. The 144QFP is a monster and isn't of much use to me.

Packaging is a PITA.

I tried accessing the web site to get pricing at their store. After days they have not approved my login so I can visit their store. A sales person sent me an email but has not responded to my reply. Strange. I was hoping to get pricing info on some larger parts.

They only approved my login after a fairly stroppy email. I think that
currently Efinix fail all tests for being ready to do business.

I can't understand the package thing - I thought that Microchip had
proved that getting design-ins was key to getting business and making it
easy to get started was the key to getting design-ins.

Sub 1mm pitch BGA packages add huge amounts of cost right at the very
front end of a project - often the bit when you're using the tea and
coffee budget to try and get the bosses interested. But 0.5mm pitch TQFP
and QFN can be hand soldered. I'm amazed that the aspiring newcomers to
the FPGA market aren't more actively filling that gap.

I hadn't thought of it that way. I suppose some number of projects do start with midnight requisitioned, unsanctioned efforts. Still, as the Xilinx reps pointed out some time ago, each package supported adds cost, not just up front, but continuing costs. So any start up will be cautious with adding new packages.

Gowin and AGM both are supporting these easier to work with packages, but it is still unclear how "real" they are. As I've posted I have actually had a phone conference with Gowin representatives, but I get zero response from AGM. I don't recall what packages Anlogic has, but other than a board at Seeed has no presence.

I'm glad I'm not alone in preferring the QFN/QFP packages.

--

Rick C.

+- Get 1,000 miles of free Supercharging
+- Tesla referral code - https://ts.la/richard11209
 
On 05/12/2019 17:02, Rick C wrote:
On Thursday, December 5, 2019 at 3:47:35 AM UTC-5, Michael Kellett wrote:
On 05/12/2019 03:16, Rick C wrote:
On Tuesday, December 3, 2019 at 3:25:45 PM UTC-5, Rick C wrote:
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

I dug into the parts a bit more and if I bite the bullet with the package, the T8 looks pretty good. But it has some limitations.

There is 12kB of block RAM available in widths that include x5 and multiples. A bit odd, but potentially useful. So the RAM could be 12 kW of 10 bits. As instruction memory that can be useful. I just wish it had a bit more memory.

In the 81 pin BGA package it has only 1 of the five PLLs available and that is "simple" whatever that means. That package only has 55 GPIOs. Many of the I/O features are not available in the smaller packages. The 144QFP is a monster and isn't of much use to me.

Packaging is a PITA.

I tried accessing the web site to get pricing at their store. After days they have not approved my login so I can visit their store. A sales person sent me an email but has not responded to my reply. Strange. I was hoping to get pricing info on some larger parts.

They only approved my login after a fairly stroppy email. I think that
currently Efinix fail all tests for being ready to do business.

I can't understand the package thing - I thought that Microchip had
proved that getting design-ins was key to getting business and making it
easy to get started was the key to getting design-ins.

Sub 1mm pitch BGA packages add huge amounts of cost right at the very
front end of a project - often the bit when you're using the tea and
coffee budget to try and get the bosses interested. But 0.5mm pitch TQFP
and QFN can be hand soldered. I'm amazed that the aspiring newcomers to
the FPGA market aren't more actively filling that gap.

I hadn't thought of it that way. I suppose some number of projects do start with midnight requisitioned, unsanctioned efforts. Still, as the Xilinx reps pointed out some time ago, each package supported adds cost, not just up front, but continuing costs. So any start up will be cautious with adding new packages.

Gowin and AGM both are supporting these easier to work with packages, but it is still unclear how "real" they are. As I've posted I have actually had a phone conference with Gowin representatives, but I get zero response from AGM. I don't recall what packages Anlogic has, but other than a board at Seeed has no presence.

I'm glad I'm not alone in preferring the QFN/QFP packages.

You might almost think Lattice are listening:

The Crosslink 17 and 40 will be available in 72 pin QFN, as well as all
the BGA packages.
You only get 40 IO pins out of the 72.


MK
 
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

Looking at their manuals they seem to not provide any simulation capability.. They say they are compatible with iVerilog and don't mention VHDL anywhere in their documentation that I can find. I guess they only support Verilog and you are on your own for the simulation capability.

Interesting.

--

Rick C.

++ Get 1,000 miles of free Supercharging
++ Tesla referral code - https://ts.la/richard11209
 
On Thursday, December 12, 2019 at 8:54:02 PM UTC-5, Rick C wrote:
On Friday, November 29, 2019 at 2:51:51 AM UTC-5, Brane2 wrote:
I'm talking about these guys:

https://www.efinixinc.com

Their Trion program seems interesting:

- it stretches from area that is occupied by Lattice's MachXO3 on the low end and ECP5 on hight end
- no onboard FLASH.Just OTP on few small models and nothing on high end
- universal tile that can do routing as well as LUT/MEM/logic
- 5 bit BLOCK RAM instead of traditional 9-bit
- additional simpplifications on the process end claim 4x chip price reduction ( only 7 metalisation layers instead of 14 etc)

Trion on first impression looks nice, but:

- a bit slower than ECP5
- based on digikey prices, not cheaper than EPC5, or even pricier at some points

has anyone used them and has some data to share on the matter ?

Looking at their manuals they seem to not provide any simulation capability. They say they are compatible with iVerilog and don't mention VHDL anywhere in their documentation that I can find. I guess they only support Verilog and you are on your own for the simulation capability.

Interesting.

I finally heard back from them about my login approval. But there's nothing to see. Their datasheets used to be behind the login and now they are not. It got me into their store but they only have sample kits, so you still need to contact a sales person for pricing and I'm not clear what this says about availability of the T13 and T20. Digikey only has the T4 and T8.

All the sample boxes have 10 chips and are $100.

The salesman wants to talk to me. I guess I'll need to do that.

--

Rick C.

--- Get 1,000 miles of free Supercharging
--- Tesla referral code - https://ts.la/richard11209
 

Welcome to EDABoard.com

Sponsor

Back
Top