DIP IDC

D

David Lesher

Guest
I have need for 8-pin IDC DIP headers. In other words, a ribbon
cable IDC connector that plugs into a 8-pin IC socket.

Now, I can find IDC males that are 0.1 pin spacing, 0.1 row
spacing,for $0.50~$1.00 easily.

But when I need one in DIP spacing (0.1 x 0.3) they are either
$4.00+ <https://www.mouser.com/productdetail/571-746611-7>
OR the supplier wants $18 to ship one.
<https://store.sacelec.com/index.php?l=product_detail&p=9451>

Anyone found a better source?

(Then there's the issue of one end of the cable having Pin 1 be
the #1 ribbon conductor, the other end wanting that conductor to
terminate on its pin 6.)


--
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close..........................
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433
 
On 12/29/2017 12:22 PM, David Lesher wrote:
I have need for 8-pin IDC DIP headers. In other words, a ribbon
cable IDC connector that plugs into a 8-pin IC socket.

Now, I can find IDC males that are 0.1 pin spacing, 0.1 row
spacing,for $0.50~$1.00 easily.

But when I need one in DIP spacing (0.1 x 0.3) they are either
$4.00+ <https://www.mouser.com/productdetail/571-746611-7
OR the supplier wants $18 to ship one.
https://store.sacelec.com/index.php?l=product_detail&p=9451

Anyone found a better source?

(Then there's the issue of one end of the cable having Pin 1 be
the #1 ribbon conductor, the other end wanting that conductor to
terminate on its pin 6.)
Click to expand...

Could you whip up a bunch of little PCB adapters? Pads for the cheap IDC
males on one side, pads for some thick durable pins to slot into the DIP
sockets on the other (that also route the conductors appropriately)?

The pins on the one in the second link look like they were designed to
be soldered once permanently to a PCB. They won't survive too many
insertion-removal cycles. If they don't need to be cycled then the
question is why have the sockets there at all.
 
bitrex <bitrex@de.lete.earthlink.net> writes:


Could you whip up a bunch of little PCB adapters? Pads for the
cheap IDC males on one side, pads for some thick durable pins
to slot into the DIP sockets on the other (that also route the
conductors appropriately)?
Click to expand...

Zero clearance on the DIP end. It's under something else.

The pins on the one in the second link look like they were
designed to be soldered once permanently to a PCB. They won't
survive too many insertion-removal cycles. If they don't need
to be cycled then the question is why have the sockets there at
all.
Click to expand...

The sockets on both ends, the 8-pin DIP & the 2x4 0.1 IDC are on
existing boards. I wish the 2x4 was male headers, and I may be
able to get a special order on them so it will be, but the DIP
is on the PLC itself.


--
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close..........................
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433
 
On 2017-12-29, David Lesher <wb8foz@panix.com> wrote:

The sockets on both ends, the 8-pin DIP & the 2x4 0.1 IDC are on
existing boards. I wish the 2x4 was male headers, and I may be
able to get a special order on them so it will be, but the DIP
is on the PLC itself.
Click to expand...

I suppose I should know what PLC stands for but I don't.
"Programmable logic controller" doesn't seem to make much sense
here. "Portland lesbian choir" has a nice ring to it but I don't
think this is it either...

--
André Majorel http://www.teaser.fr/~amajorel/
"Mort aux vieux" -- un jeune
"Mort aux jeunes" -- un vieux
 
On 2017/12/29 9:22 AM, David Lesher wrote:
I have need for 8-pin IDC DIP headers. In other words, a ribbon
cable IDC connector that plugs into a 8-pin IC socket.

Now, I can find IDC males that are 0.1 pin spacing, 0.1 row
spacing,for $0.50~$1.00 easily.

But when I need one in DIP spacing (0.1 x 0.3) they are either
$4.00+ <https://www.mouser.com/productdetail/571-746611-7
OR the supplier wants $18 to ship one.
https://store.sacelec.com/index.php?l=product_detail&p=9451

Anyone found a better source?

(Then there's the issue of one end of the cable having Pin 1 be
the #1 ribbon conductor, the other end wanting that conductor to
terminate on its pin 6.)
Click to expand...

These guys?

http://www.cablesandconnectors.com/09800-09.HTM

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
 
On 12/29/2017 02:54 PM, Andre Majorel wrote:
On 2017-12-29, David Lesher <wb8foz@panix.com> wrote:

The sockets on both ends, the 8-pin DIP & the 2x4 0.1 IDC are on
existing boards. I wish the 2x4 was male headers, and I may be
able to get a special order on them so it will be, but the DIP
is on the PLC itself.

I suppose I should know what PLC stands for but I don't.
"Programmable logic controller" doesn't seem to make much sense
here. "Portland lesbian choir" has a nice ring to it but I don't
think this is it either...
Click to expand...

I think he means the first context but the "PLC" is a board comprised of
many components which make up the functionality of the PLC.

<http://3.bp.blogspot.com/-7xJZm9aSKRY/UF6vjXoTQWI/AAAAAAAAARc/XorR94gez-Q/s1600/internal_architecture_of_programmable_logic_controllers_PLC_concept.gif>
 
bitrex <bitrex@de.lete.earthlink.net> writes:

I suppose I should know what PLC stands for but I don't.
"Programmable logic controller" doesn't seem to make much sense
here. "Portland lesbian choir" has a nice ring to it but I don't
think this is it either...


I think he means the first context but the "PLC" is a board comprised of
many components which make up the functionality of the PLC.

http://3.bp.blogspot.com/-7xJZm9aSKRY/UF6vjXoTQWI/AAAAAAAAARc/XorR94gez-Q/s1600/internal_architecture_of_programmable_logic_controllers_PLC_concept.gif
Click to expand...

Indeed: <https://dlidirect.com/products/diy-programmable-controller>
--
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close..........................
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433
 
John Robertson <spam@flippers.com> writes:

Anyone found a better source?

(Then there's the issue of one end of the cable having Pin 1 be
the #1 ribbon conductor, the other end wanting that conductor to
terminate on its pin 6.)



These guys?

http://www.cablesandconnectors.com/09800-09.HTM

John :-#)#
Click to expand...

Thanks; they are more reasonable. I bought a bunch to see how they look.

--
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close..........................
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433
 
On 2017/12/29 7:34 PM, David Lesher wrote:
John Robertson <spam@flippers.com> writes:

Anyone found a better source?

(Then there's the issue of one end of the cable having Pin 1 be
the #1 ribbon conductor, the other end wanting that conductor to
terminate on its pin 6.)



These guys?

http://www.cablesandconnectors.com/09800-09.HTM

John :-#)#


Thanks; they are more reasonable. I bought a bunch to see how they look.
Click to expand...

Let us know the results! I would like to find the 4 stepped row type of
PCB to IDC ribbon cable connector at a reasonable price. Used in 1980s
Williams pinball and video arcade games...

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
 
John Robertson wrote:
On 2017/12/29 7:34 PM, David Lesher wrote:
John Robertson <spam@flippers.com> writes:

Anyone found a better source?

(Then there's the issue of one end of the cable having Pin 1 be
the #1 ribbon conductor, the other end wanting that conductor to
terminate on its pin 6.)



These guys?

http://www.cablesandconnectors.com/09800-09.HTM

John :-#)#


Thanks; they are more reasonable. I bought a bunch to see how they look.


Let us know the results! I would like to find the 4 stepped row type of
PCB to IDC ribbon cable connector at a reasonable price. Used in 1980s
Williams pinball and video arcade games...
Click to expand...

How about a link to a clear photo of one?
 
On 2017/12/30 1:38 AM, Michael A Terrell wrote:
John Robertson wrote:
On 2017/12/29 7:34 PM, David Lesher wrote:
John Robertson <spam@flippers.com> writes:

Anyone found a better source?

(Then there's the issue of one end of the cable having Pin 1 be
the #1 ribbon conductor, the other end wanting that conductor to
terminate on its pin 6.)



These guys?

http://www.cablesandconnectors.com/09800-09.HTM

John :-#)#


Thanks; they are more reasonable. I bought a bunch to see how they look.


Let us know the results! I would like to find the 4 stepped row type of
PCB to IDC ribbon cable connector at a reasonable price. Used in 1980s
Williams pinball and video arcade games...


   How about a link to a clear photo of one?
Click to expand...

Fair enough - photos of 40 pin ribbon connector to staggered row PCB mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0

Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get enough
to do the next twenty years of service...

Thanks,

John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
 
John Robertson wrote:
Michael A Terrell wrote:

John Robertson wrote:

Let us know the results! I would like to find the 4 stepped row
type of PCB to IDC ribbon cable connector at a reasonable price.
Used in 1980s Williams pinball and video arcade games...

How about a link to a clear photo of one?

Fair enough - photos of 40 pin ribbon connector to staggered row PCB
mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0

Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get
enough to do the next twenty years of service...
Click to expand...

3M makes them. I see them in other equipment fairly often:

<https://www.alliedelec.com/3m-3418-0005pr/70431205/>
 
On 2017/12/30 6:08 PM, Michael A Terrell wrote:
John Robertson wrote:

Michael A Terrell wrote:

John Robertson wrote:

Let us know the results! I would like to find the 4 stepped row
type of PCB to IDC ribbon cable connector at a reasonable price.
Used in 1980s Williams pinball and video arcade games...

    How about a link to a clear photo of one?

Fair enough - photos of 40 pin ribbon connector to staggered row PCB
mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0


Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get
enough to do the next twenty years of service...


   3M makes them. I see them in other equipment fairly often:

https://www.alliedelec.com/3m-3418-0005pr/70431205/
Click to expand...

Thanks Mike!

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
 
On 2017/12/30 6:08 PM, Michael A Terrell wrote:
John Robertson wrote:

Michael A Terrell wrote:

John Robertson wrote:

Let us know the results! I would like to find the 4 stepped row
type of PCB to IDC ribbon cable connector at a reasonable price.
Used in 1980s Williams pinball and video arcade games...

    How about a link to a clear photo of one?

Fair enough - photos of 40 pin ribbon connector to staggered row PCB
mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0


Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get
enough to do the next twenty years of service...


   3M makes them. I see them in other equipment fairly often:

https://www.alliedelec.com/3m-3418-0005pr/70431205/
Click to expand...

Correction, 3M MADE them. Discontinued in 2014. So I need to stock up!

https://webcache.googleusercontent.com/search?q=cache:DMCaU3YSyQwJ:https://www.ttiinc.com/content/dam/ttiinc/products/PCN/3M/3M-Obsolescence-DIP-2-and-4-Row-PCB-Connector-MDR-Edge-Connectors-PCN-120415.pdf+&cd=10&hl=en&ct=clnk&gl=ca&client=firefox-b-ab

John :-#(#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
 
John Robertson wrote:
On 2017/12/30 6:08 PM, Michael A Terrell wrote:
John Robertson wrote:

Michael A Terrell wrote:

John Robertson wrote:

Let us know the results! I would like to find the 4 stepped row
type of PCB to IDC ribbon cable connector at a reasonable price.
Used in 1980s Williams pinball and video arcade games...

How about a link to a clear photo of one?

Fair enough - photos of 40 pin ribbon connector to staggered row PCB
mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0


Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get
enough to do the next twenty years of service...


3M makes them. I see them in other equipment fairly often:

https://www.alliedelec.com/3m-3418-0005pr/70431205/


Correction, 3M MADE them. Discontinued in 2014. So I need to stock up!

https://webcache.googleusercontent.com/search?q=cache:DMCaU3YSyQwJ:https://www.ttiinc.com/content/dam/ttiinc/products/PCN/3M/3M-Obsolescence-DIP-2-and-4-Row-PCB-Connector-MDR-Edge-Connectors-PCN-120415.pdf+&cd=10&hl=en&ct=clnk&gl=ca&client=firefox-b-ab
Click to expand...


Can you use used ones, with the ribbon cable still in them? I think
that I may have some on junk boards from other equipment that I can lift
with a solder pot. I have to find help to clean out the building where a
ton of scrap PC boards fill dozens of Banana boxes. I scrapped a load of
industrial printers that I think used the 40 pin version.

Check the usual surplus dealers, and Ebay now that you have the
proper name and a part number.
 
In sci.electronics.components John Robertson <spam@flippers.com> wrote:
On 2017/12/30 6:08 PM, Michael A Terrell wrote:
John Robertson wrote:

Michael A Terrell wrote:

John Robertson wrote:

Let us know the results! I would like to find the 4 stepped row
type of PCB to IDC ribbon cable connector at a reasonable price.
Used in 1980s Williams pinball and video arcade games...

    How about a link to a clear photo of one?

Fair enough - photos of 40 pin ribbon connector to staggered row PCB
mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0


Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get
enough to do the next twenty years of service...


   3M makes them. I see them in other equipment fairly often:

https://www.alliedelec.com/3m-3418-0005pr/70431205/


Correction, 3M MADE them. Discontinued in 2014. So I need to stock up!

https://webcache.googleusercontent.com/search?q=cache:DMCaU3YSyQwJ:https://www.ttiinc.com/content/dam/ttiinc/products/PCN/3M/3M-Obsolescence-DIP-2-and-4-Row-PCB-Connector-MDR-Edge-Connectors-PCN-120415.pdf+&cd=10&hl=en&ct=clnk&gl=ca&client=firefox-b-ab

John :-#(#
Click to expand...

Not such an easy task -- Allied Electronics has ZERO stock for ALL pin
counts i.e. they have NONE at all.

---
******************************************************************
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
******************************************************************
 
On 2017/12/31 1:29 PM, Sergey Kubushyn wrote:
In sci.electronics.components John Robertson <spam@flippers.com> wrote:
On 2017/12/30 6:08 PM, Michael A Terrell wrote:
John Robertson wrote:

Michael A Terrell wrote:

John Robertson wrote:

Let us know the results! I would like to find the 4 stepped row
type of PCB to IDC ribbon cable connector at a reasonable price.
Used in 1980s Williams pinball and video arcade games...

    How about a link to a clear photo of one?

Fair enough - photos of 40 pin ribbon connector to staggered row PCB
mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0


Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get
enough to do the next twenty years of service...


   3M makes them. I see them in other equipment fairly often:

https://www.alliedelec.com/3m-3418-0005pr/70431205/


Correction, 3M MADE them. Discontinued in 2014. So I need to stock up!

https://webcache.googleusercontent.com/search?q=cache:DMCaU3YSyQwJ:https://www.ttiinc.com/content/dam/ttiinc/products/PCN/3M/3M-Obsolescence-DIP-2-and-4-Row-PCB-Connector-MDR-Edge-Connectors-PCN-120415.pdf+&cd=10&hl=en&ct=clnk&gl=ca&client=firefox-b-ab

John :-#(#

Not such an easy task -- Allied Electronics has ZERO stock for ALL pin
counts i.e. they have NONE at all.

---
******************************************************************
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
******************************************************************
Click to expand...

It is not a catastrophe if I can't find them, in 99% of cases they come
apart and can be cinched properly on fresh ribbon wire.

I do have junk boards with some of those connectors in an emergency. It
is preferred to provide customers with new rather than used product
where possible.

Thanks,

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
 
Sergey Kubushyn wrote:
In sci.electronics.components John Robertson <spam@flippers.com> wrote:
On 2017/12/30 6:08 PM, Michael A Terrell wrote:
John Robertson wrote:

Michael A Terrell wrote:

John Robertson wrote:

Let us know the results! I would like to find the 4 stepped row
type of PCB to IDC ribbon cable connector at a reasonable price.
Used in 1980s Williams pinball and video arcade games...

How about a link to a clear photo of one?

Fair enough - photos of 40 pin ribbon connector to staggered row PCB
mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0


Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get
enough to do the next twenty years of service...


3M makes them. I see them in other equipment fairly often:

https://www.alliedelec.com/3m-3418-0005pr/70431205/


Correction, 3M MADE them. Discontinued in 2014. So I need to stock up!

https://webcache.googleusercontent.com/search?q=cache:DMCaU3YSyQwJ:https://www.ttiinc.com/content/dam/ttiinc/products/PCN/3M/3M-Obsolescence-DIP-2-and-4-Row-PCB-Connector-MDR-Edge-Connectors-PCN-120415.pdf+&cd=10&hl=en&ct=clnk&gl=ca&client=firefox-b-ab

John :-#(#

Not such an easy task -- Allied Electronics has ZERO stock for ALL pin
counts i.e. they have NONE at all.
Click to expand...

It also said that 31 were available in 10 days.
 
On 2017-12-31, Sergey Kubushyn <ksi@koi8.net> wrote:
In sci.electronics.components John Robertson <spam@flippers.com> wrote:
On 2017/12/30 6:08 PM, Michael A Terrell wrote:
John Robertson wrote:

Michael A Terrell wrote:

John Robertson wrote:

Let us know the results! I would like to find the 4 stepped row
type of PCB to IDC ribbon cable connector at a reasonable price.
Used in 1980s Williams pinball and video arcade games...

    How about a link to a clear photo of one?

Fair enough - photos of 40 pin ribbon connector to staggered row PCB
mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0


Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get
enough to do the next twenty years of service...


   3M makes them. I see them in other equipment fairly often:

https://www.alliedelec.com/3m-3418-0005pr/70431205/


Correction, 3M MADE them. Discontinued in 2014. So I need to stock up!

https://webcache.googleusercontent.com/search?q=cache:DMCaU3YSyQwJ:https://www.ttiinc.com/content/dam/ttiinc/products/PCN/3M/3M-Obsolescence-DIP-2-and-4-Row-PCB-Connector-MDR-Edge-Connectors-PCN-120415.pdf+&cd=10&hl=en&ct=clnk&gl=ca&client=firefox-b-ab

John :-#(#

Not such an easy task -- Allied Electronics has ZERO stock for ALL pin
counts i.e. they have NONE at all.
Click to expand...

Strange, RS-online (which SFAIK is the same company) lists 31 in stock.

Also Winchester electronics (the brand in the photo) is still making
connectors, dunno if they are still making that one

there's also this one:

https://b2b.harting.com/ebusiness/en/SEK-19-40-4-M-S32-AU-KONTAKT/09190409643


And there's one from Tyco to I think.

--
This email has not been checked by half-arsed antivirus software
 
In sci.electronics.components Jasen Betts <jasen@xnet.co.nz> wrote:
On 2017-12-31, Sergey Kubushyn <ksi@koi8.net> wrote:
In sci.electronics.components John Robertson <spam@flippers.com> wrote:
On 2017/12/30 6:08 PM, Michael A Terrell wrote:
John Robertson wrote:

Michael A Terrell wrote:

John Robertson wrote:

Let us know the results! I would like to find the 4 stepped row
type of PCB to IDC ribbon cable connector at a reasonable price.
Used in 1980s Williams pinball and video arcade games...

    How about a link to a clear photo of one?

Fair enough - photos of 40 pin ribbon connector to staggered row PCB
mount:

https://www.dropbox.com/sh/lq93garyj90gcb5/AAAkft1vBz28dL3kiqHzLElRa?dl=0


Tiny URL version:

https://tinyurl.com/40pin-ribbon

I haven't actually spent much time looking recently as they are needed
rarely, but hey, maybe someone has seen them around and I can get
enough to do the next twenty years of service...


   3M makes them. I see them in other equipment fairly often:

https://www.alliedelec.com/3m-3418-0005pr/70431205/


Correction, 3M MADE them. Discontinued in 2014. So I need to stock up!

https://webcache.googleusercontent.com/search?q=cache:DMCaU3YSyQwJ:https://www.ttiinc.com/content/dam/ttiinc/products/PCN/3M/3M-Obsolescence-DIP-2-and-4-Row-PCB-Connector-MDR-Edge-Connectors-PCN-120415.pdf+&cd=10&hl=en&ct=clnk&gl=ca&client=firefox-b-ab

John :-#(#

Not such an easy task -- Allied Electronics has ZERO stock for ALL pin
counts i.e. they have NONE at all.

Strange, RS-online (which SFAIK is the same company) lists 31 in stock.
Click to expand...

The US wing is called Allied Electronics. 31 in stock at RS-online means
those are in UK (or somewhere else) so Allied can request those and have
them delivered to the US in 10 days.

That also means that 10 days is _NOT_ a factory lead time; it is just how
long would it take to ship the remaining 31 to a particular country. In
other words those 31 is all they have and all wings of RS Online and their
partners refer to that same remaining lot of 31. Once those are sold there
will be no more available anywhere among RS online and friends -- not in 10
days or at all. Those are leftover parts.

---
******************************************************************
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
******************************************************************
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top