Data sheets?: Nat Semi's B9224 micro and UL82??? drivers

D

DaveC

Guest
I'm working on a mid-90's car alarm built around NS' B9224AB and what seems
to be (numbers have been scrubbed off these IC's) UL82003 (some digits may
not be correct) by NS and Motorola.

Both are DIPs: 9224 is 40 pin; 8**** is 16 pin.

The UL8**** IC's seem to be drivers that interface the 9224's outputs and
drive relays.

I'm trying to find data on these IC's at NS web site, but I think they're too
old to be found there.

Any ideas where I can find data on these?

I presume that the micro is coded internally, and if it is hosed, the entire
PCB has to go (no component-level repair available from Clifford alarms...)

Thanks,
Dave
--
Dave C
dave-usenet3016@mailblocks.com
 
"DaveC" <dave-usenet3016@mailblocks.com> wrote in message
news:0001HW.BB58302F001BF17AF0386600@news.individual.net...
I'm working on a mid-90's car alarm built around NS' B9224AB and what
seems
to be (numbers have been scrubbed off these IC's) UL82003 (some digits may
not be correct) by NS and Motorola.

Both are DIPs: 9224 is 40 pin; 8**** is 16 pin.

The UL8**** IC's seem to be drivers that interface the 9224's outputs and
drive relays.

I'm trying to find data on these IC's at NS web site, but I think they're
too
old to be found there.

Any ideas where I can find data on these?

I presume that the micro is coded internally, and if it is hosed, the
entire
PCB has to go (no component-level repair available from Clifford
alarms...)

Thanks,
Dave
--
Dave C
dave-usenet3016@mailblocks.com

9224 seems more like a date code. It's probably a mask programmed uP. The
other is most like a ULN2003.

Ken
 

Welcome to EDABoard.com

Sponsor

Back
Top