Welcome Notice

Register Log in

audio recording on IC -help wanted

T

Tilmann Reh

Guest
Look165 schrieb:

> 2.50 mm is rather a French size.

2.50 mm (metric) is rather common - except for the U.S. :)

> I don't know if AMD, Sourriau or Amphenol still exist.

Probably you think of AMP - they have been bought by Tyco Electronics
(TE) many years ago, but TE doesn't have anything of this kind. In fact,
they do offer something similar, but the housing is different.

Souriau and Amphenol (both still exist) don't make such small crimp WtB
connectors, they're more into the "heavy" stuff...

> But they are (were) the main suppliers of connectors metric size.

There are some more, like Lumberg and JST (and Molex, of course).
But none of them has anything looking like the connectors in question.
:-(

Thanks again though,
Tilmann
 
P

Phil Hobbs

Guest
On 12/23/2015 01:36 PM, daniela Rangel wrote:
El miércoles, 23 de septiembre de 1998, 0:00:00 (UTC-7), Kent White escribió:
Hello;

Does anyone know of a North American distributor for Nippon Tanshi, a
manufacturer of crimp terminals? We have tried in vain to find them, and
any help would be much appreciated.

Regards,
Kent White
Design Engineer
Noma Appliance and Electronic.

Hi Kent... I'm looking now the distributor in America of this MFG...
Do you have any any news?
You're replying to a 17-year-old post.

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs
Principal Consultant
ElectroOptical Innovations LLC
Optics, Electro-optics, Photonics, Analog Electronics

160 North State Road #203
Briarcliff Manor NY 10510

hobbs at electrooptical dot net
http://electrooptical.net
 

Guest
On Wed, 23 Dec 2015 12:42:08 +0100, Tilmann Reh
<usenet2007nospam@autometer.de> wrote:

perhaps someone has an idea what brand/type of connector this is?

http://www.autometer.de/files/Stecker1.jpg
http://www.autometer.de/files/Stecker2.jpg

It's a Wire-to-Board crimp connector, 2.50 mm pitch with a "true"
locking mechanism.
2.50 mm sounds like some Soviet/Russian standard, so you might look at
that direction.
 
B

Baron

Guest
upsidedown@downunder.com prodded the keyboard with:

On Wed, 23 Dec 2015 12:42:08 +0100, Tilmann Reh
usenet2007nospam@autometer.de> wrote:

perhaps someone has an idea what brand/type of connector this is?

http://www.autometer.de/files/Stecker1.jpg
http://www.autometer.de/files/Stecker2.jpg

It's a Wire-to-Board crimp connector, 2.50 mm pitch with a "true"
locking mechanism.

2.50 mm sounds like some Soviet/Russian standard, so you might look
at that direction.
That connector is/was used as a mains 110/240 volt connector in
various TV's, computer PSU and PSU's in general. Possibly Japanese.

--
Best Regards:
Baron.
 
M

Machi

Guest
"Tilmann Reh" <usenet2007nospam@autometer.de> wrote in message
news:n5e15m$r39$1@dont-email.me...
Hello group(s),

perhaps someone has an idea what brand/type of connector this is?

http://www.autometer.de/files/Stecker1.jpg
http://www.autometer.de/files/Stecker2.jpg

It's a Wire-to-Board crimp connector, 2.50 mm pitch with a "true"
locking mechanism.
Hello.
I mean that is JST XA 3 pin connector with lock.
Similar housing but with 2 pin u can find here
http://www.alibaba.com/product-detail/JST-XA-2-pin-housing-connector_673565940.html?spm=a2700.7724838.0.0.V0RwA8
 
T

Tilmann Reh

Guest
Machi schrieb:

"Tilmann Reh" <usenet2007nospam@autometer.de> wrote
perhaps someone has an idea what brand/type of connector this is?

http://www.autometer.de/files/Stecker1.jpg
http://www.autometer.de/files/Stecker2.jpg

It's a Wire-to-Board crimp connector, 2.50 mm pitch with a "true"
locking mechanism.

Hello.
I mean that is JST XA 3 pin connector with lock.
Thanks for your reply - but it's definitely not an XA connector (which
is used on the same board elsewhere, BTW).

If you look at the XA datasheet, the shape and profile of the shrouded
header is completely different.

Tilmann
 
T

Tilmann Reh

Guest
I wrote:

perhaps someone has an idea what brand/type of connector this is?

http://www.autometer.de/files/Stecker1.jpg
http://www.autometer.de/files/Stecker2.jpg

It's a Wire-to-Board crimp connector, 2.50 mm pitch with a "true"
locking mechanism.

The board where it's on carries a lot of different JST connectors that I
was all able to identify, however this type is unknown to me and I
couldn't find it at any of the common makers of such crimp connectors.
There is absolutely no marking or branding on neither the header nor the
housing.

Any hints and suggestions are greatly appreciated.
Doing an image search, I could at least find this:
<http://www.firgellirobots.com/products/2-5mm-jst-xh-style-shrouded-male-female-connectors-right-angle-pin>

It appears as an (maybe unofficial or even illegal) clone of the JST XH
connector with locking modification - the original XH datasheet doesn't
show such a variant...

Tilmann
 
L

Look165

Guest
If I had to face such a situation, I would change both header and
connector and put somthing compatible ; the only constraint is the 2.50
pitch.
It is very simple to do that when I see the configuration of the board.


Tilmann Reh a ĂŠcrit :
Hello group(s),

perhaps someone has an idea what brand/type of connector this is?

http://www.autometer.de/files/Stecker1.jpg
http://www.autometer.de/files/Stecker2.jpg

It's a Wire-to-Board crimp connector, 2.50 mm pitch with a "true"
locking mechanism.

The board where it's on carries a lot of different JST connectors that I
was all able to identify, however this type is unknown to me and I
couldn't find it at any of the common makers of such crimp connectors.
There is absolutely no marking or branding on neither the header nor the
housing.

Any hints and suggestions are greatly appreciated.

Thanks in advance - and merry christmas to everyone,
Tilmann
 
T

Tilmann Reh

Guest
Look165 schrieb:

If I had to face such a situation, I would change both header and
connector and put somthing compatible ; the only constraint is the 2.50
pitch.
It is very simple to do that when I see the configuration of the board.
We need to connect to such a connector on an existing board - in series
quantities, so replacing the header by another type is no option.

I will have a closer look if XH contacts fit into the housings - that
would probably solve the situation (AFAIK the boards come with some
preconfigured wires from which we can probably reap the housings).

Interestingly though that this particular connector type (of which
several are on that board) obviously is completely unknown while all
others on these boards are pretty standard and easily identified...

Tilmann
 
T

Tilmann Reh

Guest
I wrote:

I will have a closer look if XH contacts fit into the housings - that
would probably solve the situation (AFAIK the boards come with some
preconfigured wires from which we can probably reap the housings).
Just did the test - apparently, the XH contacts can be used. So at least
this work-around would work.

Tilmann
 

Guest
China Shenzhen ZHAOWEI Machinery & Electronics Co. Ltd engages in designing, manufacturing and marketing all kinds of electric motors. They are mainly suitable for the following applications: smart home application used in smart kitchen and laundry, medical instrument for personal care, smart E-transmission applied in automobile, industry automation applied in telecommunication and a great variety of plastic/metal planetary gearbox in different sizes.
In order to develop the oversea market, we are current seeking new partners around the world to create a bright future together. ZhaoWei is a right choice and excellent partnership with sincere services.

Company: Shenzhen ZHAOWEI Machinery & Electronics Co., Ltd
URL: http://www.zwgearbox.com/
Contact: Annie Liu
Tel:+86-755-27322652
Fax:+86-755-27323949
E-mail:sales@zwgearbox.com
Add: Blk. 18, Longwangmiao Industry Park, Fuyong Tn., Bao’an Dist., Shenzhen 518103, Guangdong, China
 

Guest
China Shenzhen ZHAOWEI Machinery & Electronics Co. Ltd engages in designing, manufacturing and marketing all kinds of electric motors. They are mainly suitable for the following applications: smart home application used in smart kitchen and laundry, medical instrument for personal care, smart E-transmission applied in automobile, industry automation applied in telecommunication and a great variety of plastic/metal planetary gearbox in different sizes.
In order to develop the oversea market, we are current seeking new partners around the world to create a bright future together. ZhaoWei is a right choice and excellent partnership with sincere services.

Company: Shenzhen ZHAOWEI Machinery & Electronics Co., Ltd
URL: http://www.zwgearbox.com/
Contact: Annie Liu
Tel:+86-755-27322652
Fax:+86-755-27323949
E-mail:sales@zwgearbox.com
Add: Blk. 18, Longwangmiao Industry Park, Fuyong Tn., Bao’an Dist., Shenzhen 518103, Guangdong, China
 

Guest
China Shenzhen ZHAOWEI Machinery & Electronics Co. Ltd engages in designing, manufacturing and marketing all kinds of electric motors. They are mainly suitable for the following applications: smart home application used in smart kitchen and laundry, medical instrument for personal care, smart E-transmission applied in automobile, industry automation applied in telecommunication and a great variety of plastic/metal planetary gearbox in different sizes.
In order to develop the oversea market, we are current seeking new partners around the world to create a bright future together. ZhaoWei is a right choice and excellent partnership with sincere services.

Company: Shenzhen ZHAOWEI Machinery & Electronics Co., Ltd
URL: http://www.zwgearbox.com/
Contact: Annie Liu
Tel:+86-755-27322652
Fax:+86-755-27323949
E-mail:sales@zwgearbox.com
Add: Blk. 18, Longwangmiao Industry Park, Fuyong Tn., Bao’an Dist., Shenzhen 518103, Guangdong, China
 
M

Michael A. Terrell

Guest
liangxiaoxiao138@gmail.com wrote:
China Shenzhen ZHAOWEI Machinery & Electronics Co. Ltd engages in designing, manufacturing and marketing all kinds of electric motors. They are mainly suitable for the following applications: smart home application used in smart kitchen and laundry, medical instrument for personal care, smart E-transmission applied in automobile, industry automation applied in telecommunication and a great variety of plastic/metal planetary gearbox in different sizes.
In order to develop the oversea market, we are current seeking new partners around the world to create a bright future together. ZhaoWei is a right choice and excellent partnership with sincere services.

Company: Shenzhen ZHAOWEI Machinery & Electronics Co., Ltd
URL: http://www.zwgearbox.com/
Contact: Annie Liu
Tel:+86-755-27322652
Fax:+86-755-27323949
E-mail:sales@zwgearbox.com
Add: Blk. 18, Longwangmiao Industry Park, Fuyong Tn., Bao’an Dist., Shenzhen 518103, Guangdong, China
Spam Whore
 
M

Michael A. Terrell

Guest
zwgearbox@gmail.com wrote:
China Shenzhen ZHAOWEI Machinery & Electronics Co. Ltd engages in designing, manufacturing and marketing all kinds of electric motors. They are mainly suitable for the following applications: smart home application used in smart kitchen and laundry, medical instrument for personal care, smart E-transmission applied in automobile, industry automation applied in telecommunication and a great variety of plastic/metal planetary gearbox in different sizes.
In order to develop the oversea market, we are current seeking new partners around the world to create a bright future together. ZhaoWei is a right choice and excellent partnership with sincere services.

Company: Shenzhen ZHAOWEI Machinery & Electronics Co., Ltd
URL: http://www.zwgearbox.com/
Contact: Annie Liu
Tel:+86-755-27322652
Fax:+86-755-27323949
E-mail:sales@zwgearbox.com
Add: Blk. 18, Longwangmiao Industry Park, Fuyong Tn., Bao’an Dist., Shenzhen 518103, Guangdong, China
Spam whore.
 
S

Spehro Pefhany

Guest
On Wed, 23 Dec 2015 13:48:14 -0500, the renowned Phil Hobbs
<pcdhSpamMeSenseless@electrooptical.net> wrote:

On 12/23/2015 01:36 PM, daniela Rangel wrote:
El miércoles, 23 de septiembre de 1998, 0:00:00 (UTC-7), Kent White escribió:
Hello;

Does anyone know of a North American distributor for Nippon Tanshi, a
manufacturer of crimp terminals? We have tried in vain to find them, and
any help would be much appreciated.

Regards,
Kent White
Design Engineer
Noma Appliance and Electronic.

Hi Kent... I'm looking now the distributor in America of this MFG...
Do you have any any news?


You're replying to a 17-year-old post.

Cheers

Phil Hobbs
To be fair, a chance at an account like Noma is worth a punt

--sp




--
Best regards,
Spehro Pefhany
Amazon link for AoE 3rd Edition: http://tinyurl.com/ntrpwu8
Microchip link for 2015 Masters in Phoenix: http://tinyurl.com/l7g2k48
 

Guest
在 1999年11月4日星期四 UTC+8下午4:00:00,Bryan Andersen写道:
Hi,

I'm searching for conductive Inks and Glues.

I'd also like to know of sources for solder
resist and solder paste.

I know I ran across them before in an electronics
catalog, but can't find them anymore. Any help
locating them would be appreciated.

Thanks in advance.

Sorry for the cross post.

--
| Bryan Andersen | bryan@visi.com | http://softail.visi.com |
| Buzzwords are like annoying little flies that deserve to be swatted. |
| -Bryan Andersen |
Jiangmen ABQ Electronic Material Co.,LTD was estimated in the year of 2006.

specialized in the production of high-end photoimageable PCB ink.

We passed the ISO9001 quality standard identification.and ISO14001.



Our Main products:

PISM white colour RS-2000 (W series)for LED ( patent products ),

PISM white colour matt for automative (we have TS16949 certificate , in Europe our RS-2000 WDM already be appointed to use in Automative industry,so there are a lot of PCB factory from china ,from korea ,from Thailand are buying RS-2000 WDM for their Europe automotive order).



Electronica spray ink RS-2000 SP(our electronica spray ink is sucessful in Korea market already)

PISM green colour RS-2000GL

PISM other colours RS-2000 BL,K,Y,R ,and others.

$UV cured solder mask UV-1000 G green colour

UV cured solder mask UV-1000 W white colour

Etching ink RS-1200,RS-1280,RS-8580

UV etching ink UV-680,UV 690.

Conduction current carbon ink RF-1860

Low pressure coating ink:RS-2000 BDHF

Marking ink.



All of our products are approved by UL ,(UL filenumber :E-310593).



Main customers in china :Founder technology ,Tiger builder ,Red board ,KB

,mankun and so on.



Due to we are setting up a new factory ,the total produce capacity will

reach 800tons per month.



In order to meet the new capacity we must develop oversea market largely

with very competitive price.



Our oversea market is developing very fast on the basis of our competitive

price ,stable quality ,excellent service.

Now our oversea market is :korea ,russia ,india ,parkistan,saudi,brazil

,usa,vietnam,turkey,Iran,malaysia and so on.



Consindering the cost ,now more and more PCB manufacturers choose china

mainland PCB ink supplier.



Now we are developing your market,so if we can get cooperation chance from

you then we will be very much appreciated.



Looking forward to hearing from you and best regards.



Mrs. Wang


****************************************************************

Export Manager

Jiangmen ABQ Electronic Material CO.,LTD

Facebook: https://www.facebook.com/abq.pcb.ink

Video: https://youtu.be/iZEE5h3H6Dg

Web: http://www.jmbq.com.cn

E-MAIL: abqink@hotmail.com | abqink@gmail.com

export@jmbq.com.cn

SKYPE: abqink@hotmail.com

MP: 0086-18501626226

(Whatsapp,Viber,Line,Kakao,Wechat)
 

Guest
在 1999年11月4日星期四 UTC+8下午4:00:00,Bryan Andersen写道:
Hi,

I'm searching for conductive Inks and Glues.

I'd also like to know of sources for solder
resist and solder paste.

I know I ran across them before in an electronics
catalog, but can't find them anymore. Any help
locating them would be appreciated.

Thanks in advance.

Sorry for the cross post.

--
| Bryan Andersen | bryan@visi.com | http://softail.visi.com |
| Buzzwords are like annoying little flies that deserve to be swatted. |
| -Bryan Andersen |

Dear Sir :


Greetings to you!!!



We are jiangmen ABQ (PCB ink manufacturer)



Below is our company's profile.



Jiangmen ABQ Electronic Material Co.,LTD was estimated in the year of 2006.

specialized in the production of high-end photoimageable PCB ink.

We passed the ISO9001 quality standard identification.and ISO14001.



Our Main products:

PISM white colour RS-2000 (W series)for LED ( patent products ),

PISM white colour matt for automative (we have TS16949 certificate , in Europe our RS-2000 WDM already be appointed to use in Automative industry,so there are a lot of PCB factory from china ,from korea ,from Thailand are buying RS-2000 WDM for their Europe automotive order).



Electronica spray ink RS-2000 SP(our electronica spray ink is sucessful in Korea market already)

PISM green colour RS-2000GL

PISM other colours RS-2000 BL,K,Y,R ,and others.

$UV cured solder mask UV-1000 G green colour

UV cured solder mask UV-1000 W white colour

Etching ink RS-1200,RS-1280,RS-8580

UV etching ink UV-680,UV 690.

Conduction current carbon ink RF-1860

Low pressure coating ink:RS-2000 BDHF

Marking ink.



All of our products are approved by UL ,(UL filenumber :E-310593).



Main customers in china :Founder technology ,Tiger builder ,Red board ,KB

,mankun and so on.



Due to we are setting up a new factory ,the total produce capacity will

reach 800tons per month.



In order to meet the new capacity we must develop oversea market largely

with very competitive price.



Our oversea market is developing very fast on the basis of our competitive

price ,stable quality ,excellent service.

Now our oversea market is :korea ,russia ,india ,parkistan,saudi,brazil

,usa,vietnam,turkey,Iran,malaysia and so on.



Consindering the cost ,now more and more PCB manufacturers choose china

mainland PCB ink supplier.



Now we are developing your market,so if we can get cooperation chance from

you then we will be very much appreciated.



Looking forward to hearing from you and best regards.



Mrs. Wang


****************************************************************

Export Manager

Jiangmen ABQ Electronic Material CO.,LTD

Facebook: https://www.facebook.com/abq.pcb.ink

Video: https://youtu.be/iZEE5h3H6Dg

Web: http://www.jmbq.com.cn

E-MAIL: abqink@hotmail.com | abqink@gmail.com

export@jmbq.com.cn

SKYPE: abqink@hotmail.com

MP: 0086-18501626226

(Whatsapp,Viber,Line,Kakao,Wechat)






****************************************************************
 

Guest
在 1999年11月4日星期四 UTC+8下午4:00:00,Bryan Andersen写道:
Hi,

I'm searching for conductive Inks and Glues.

I'd also like to know of sources for solder
resist and solder paste.

I know I ran across them before in an electronics
catalog, but can't find them anymore. Any help
locating them would be appreciated.

Thanks in advance.

Sorry for the cross post.

--
| Bryan Andersen | bryan@visi.com | http://softail.visi.com |
| Buzzwords are like annoying little flies that deserve to be swatted. |
| -Bryan Andersen |

Dear Sir :


Greetings to you!!!



We are jiangmen ABQ (PCB ink manufacturer)



Below is our company's profile.



Jiangmen ABQ Electronic Material Co.,LTD was estimated in the year of 2006.

specialized in the production of high-end photoimageable PCB ink.

We passed the ISO9001 quality standard identification.and ISO14001.



Our Main products:

PISM white colour RS-2000 (W series)for LED ( patent products ),

PISM white colour matt for automative (we have TS16949 certificate , in Europe our RS-2000 WDM already be appointed to use in Automative industry,so there are a lot of PCB factory from china ,from korea ,from Thailand are buying RS-2000 WDM for their Europe automotive order).



Electronica spray ink RS-2000 SP(our electronica spray ink is sucessful in Korea market already)

PISM green colour RS-2000GL

PISM other colours RS-2000 BL,K,Y,R ,and others.

$UV cured solder mask UV-1000 G green colour

UV cured solder mask UV-1000 W white colour

Etching ink RS-1200,RS-1280,RS-8580

UV etching ink UV-680,UV 690.

Conduction current carbon ink RF-1860

Low pressure coating ink:RS-2000 BDHF

Marking ink.



All of our products are approved by UL ,(UL filenumber :E-310593).



Main customers in china :Founder technology ,Tiger builder ,Red board ,KB

,mankun and so on.



Due to we are setting up a new factory ,the total produce capacity will

reach 800tons per month.



In order to meet the new capacity we must develop oversea market largely

with very competitive price.



Our oversea market is developing very fast on the basis of our competitive

price ,stable quality ,excellent service.

Now our oversea market is :korea ,russia ,india ,parkistan,saudi,brazil

,usa,vietnam,turkey,Iran,malaysia and so on.



Consindering the cost ,now more and more PCB manufacturers choose china

mainland PCB ink supplier.



Now we are developing your market,so if we can get cooperation chance from

you then we will be very much appreciated.



Looking forward to hearing from you and best regards.



Mrs. Wang


****************************************************************

Export Manager

Jiangmen ABQ Electronic Material CO.,LTD

Facebook: https://www.facebook.com/abq.pcb.ink

Video: https://youtu.be/iZEE5h3H6Dg

Web: http://www.jmbq.com.cn

E-MAIL: abqink@hotmail.com | abqink@gmail.com

export@jmbq.com.cn

SKYPE: abqink@hotmail.com

MP: 0086-18501626226

(Whatsapp,Viber,Line,Kakao,Wechat)






****************************************************************
 

Guest
在 2003年6月26日星期四 UTC+8下午7:42:30,Jan-Erik Söderholm写道:
Maybe not 1/4 Oz, but check :
www.st-anna.data.se, under "PCB Laminate".
B.t.w, what are you building with 1/4 Oz laminate ?

Jan-Erik.

Dev Null wrote:

Hello,
I want to buy 2 - 3 ft2 each of 0.021" and 0.039" PCB with 1/4
Oz. copper. I would be interested in anything close to these specs.

Please respond to the group.

Thanks

Dear Sir :


Greetings to you!!!



We are jiangmen ABQ (PCB ink manufacturer)



Below is our company's profile.



Jiangmen ABQ Electronic Material Co.,LTD was estimated in the year of 2006.

specialized in the production of high-end photoimageable PCB ink.

We passed the ISO9001 quality standard identification.and ISO14001.



Our Main products:

PISM white colour RS-2000 (W series)for LED ( patent products ),

PISM white colour matt for automative (we have TS16949 certificate , in Europe our RS-2000 WDM already be appointed to use in Automative industry,so there are a lot of PCB factory from china ,from korea ,from Thailand are buying RS-2000 WDM for their Europe automotive order).



Electronica spray ink RS-2000 SP(our electronica spray ink is sucessful in Korea market already)

PISM green colour RS-2000GL

PISM other colours RS-2000 BL,K,Y,R ,and others.

$UV cured solder mask UV-1000 G green colour

UV cured solder mask UV-1000 W white colour

Etching ink RS-1200,RS-1280,RS-8580

UV etching ink UV-680,UV 690.

Conduction current carbon ink RF-1860

Low pressure coating ink:RS-2000 BDHF

Marking ink.



All of our products are approved by UL ,(UL filenumber :E-310593).



Main customers in china :Founder technology ,Tiger builder ,Red board ,KB

,mankun and so on.



Due to we are setting up a new factory ,the total produce capacity will

reach 800tons per month.



In order to meet the new capacity we must develop oversea market largely

with very competitive price.



Our oversea market is developing very fast on the basis of our competitive

price ,stable quality ,excellent service.

Now our oversea market is :korea ,russia ,india ,parkistan,saudi,brazil

,usa,vietnam,turkey,Iran,malaysia and so on.



Consindering the cost ,now more and more PCB manufacturers choose china

mainland PCB ink supplier.



Now we are developing your market,so if we can get cooperation chance from

you then we will be very much appreciated.



Looking forward to hearing from you and best regards.



Mrs. Wang


****************************************************************

Export Manager

Jiangmen ABQ Electronic Material CO.,LTD

Facebook: https://www.facebook.com/abq.pcb.ink

Video: https://youtu.be/iZEE5h3H6Dg

Web: http://www.jmbq.com.cn

E-MAIL: abqink@hotmail.com | abqink@gmail.com

export@jmbq.com.cn

SKYPE: abqink@hotmail.com

MP: 0086-18501626226

(Whatsapp,Viber,Line,Kakao,Wechat)





****************************************************************
 
Toggle Sidebar

Welcome to EDABoard.com

Sponsor

Top