Any parts of a LASERJET 5Si that can be salvaged?

I

Ignoramus26555

Guest
At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

i
 
Ignoramus26555 wrote:
At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

i
Click to expand...
The line cord.


--
Many thanks,

Don Lancaster
Synergetics 3860 West First Street Box 809 Thatcher, AZ 85552
voice: (928)428-4073 email: don@tinaja.com

Please visit my GURU's LAIR web site at http://www.tinaja.com
 
On Thu, 23 Jun 2005 10:05:59 -0700, Don Lancaster <don@tinaja.com> wrote:
Ignoramus26555 wrote:
At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

The line cord.
Click to expand...
Thanks. I already have a fine collection of line cords, plus this one
does not have one.

It is actually a bad ass printer, capable of printing many pages per
minute.

i
 
Ignoramus26555 <ignoramus26555@NOSPAM.26555.invalid> writes:

At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?
Click to expand...
http://repairfaq.cis.upenn.edu/Misc/gadget.htm#gadprn

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header above is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.
 
On 23 Jun 2005 13:18:47 -0400, Sam Goldwasser <sam@saul.cis.upenn.edu> wrote:
Ignoramus26555 <ignoramus26555@NOSPAM.26555.invalid> writes:

At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

http://repairfaq.cis.upenn.edu/Misc/gadget.htm#gadprn
Click to expand...
Thanks. I already have more bearings than I would like to admit. The
rest does not seem very worthwhile, given that taking the printer home
is difficult (I take train to work).

i
 
Hi,
There should be a number of precision shafts,
some with rubber coatings. But it all depends on
what you do and what you need.

Thanks
Roger Haar

Ignoramus26555 wrote:
At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

i
Click to expand...
 
On Thu, 23 Jun 2005 10:26:14 -0700, Roger Haar <haar@physics.arizona.edu> wrote:
Hi,
There should be a number of precision shafts,
some with rubber coatings. But it all depends on
what you do and what you need.
Click to expand...
I have no idea what I need. With the military surplus stuff that I
throw away, my standard procedure is to take out all motors and screws
and switches and large semiconductor devices. Given the excellent
webpage suggested by someone else, there is little truly worthwhile
stuff in that printer.

i

Thanks
Roger Haar

Ignoramus26555 wrote:

At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

i
Click to expand...

--
 
On 23 Jun 2005 10:38:41 -0700, stans4@prolynx.com <stans4@prolynx.com> wrote:
Ignoramus26555 wrote:
At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

i

Given what they get for refurb and pulled parts for these printers, a
computer parts recycler would probably pay a not inconsiderable amount
for the carcase, even if it seemed totally dead.
Click to expand...
To my big surprise, these relatively powerful printers bring
relatively little on ebay (100-200 dollars), in working condition.

Some places, tossing computer parts in the trash will get you in
legal trouble. I've never actually tossed an HP laser printer,
they've always been revivable with a little effort. The paper trays
alone are worth a bunch.

For parts of interest, you've got a laser in there, some kind of
scanning mirror and motor, rudimentary optics, gears and bearings, a
power supply with semi-HV output. The sum of the individual parts and
assemblies is far more than the whole works costs.
Click to expand...
Thank you Stan. Is the DC motor hard to get to? I like DC motors, I
may build a bigger toy elevator with one.
 
The whole printer itself, if in working condition, is quite valuable. I'd
grab the fusor assy. from a few just for insurance along with the ozone
filter and then a couple of full working units for home. Also, any toner
cartriges are going home too.
I've got several of the older LJ2/3 units and they have been very good
workhorses.

--
Why isn't there an Ozone Hole at the NORTH Pole?
 
At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?
Click to expand...
We hauled five of them to the landfill a while back and had to pay for them
to take the heavy suckers. All were working perfectly.
 
"BrotherBart" <BrotherBart@whoseyourdaddy.net> wrote in message
news:pgDue.2343$HU.765@trnddc03...
At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

We hauled five of them to the landfill a while back and had to pay for
them
to take the heavy suckers. All were working perfectly.
Click to expand...
Your local thrift will often take these if working.

http://FreeCycle.org is another good option.

N


--
Do pass the word around about http://freecycle.org/

"The worldwide Freecycle™ Network is made up of many individual groups
across the globe. It's a grassroots movement of people who are giving (&
getting) stuff for free in their own towns. Each local group is run by a
local volunteer moderator (them's good people). ...

One main rule: Everything posted must be free, legal, and appropriate for
all ages. ... "
 
I didn't bother to ask the question you are asking. I simply tore down a
couple of obsolete printers
and kept what looked interesting.

When a third printer came along, I simply trashed it, along with most of the
parts that looked "interesting"
from the first two printers.

Hope this helps,
Ace
"Ignoramus26555" <ignoramus26555@NOSPAM.26555.invalid> wrote in message
news:pmCue.9759$rd1.701@fe17.usenetserver.com...
On Thu, 23 Jun 2005 10:26:14 -0700, Roger Haar <haar@physics.arizona.edu
wrote:
Hi,
There should be a number of precision shafts,
some with rubber coatings. But it all depends on
what you do and what you need.

I have no idea what I need. With the military surplus stuff that I
throw away, my standard procedure is to take out all motors and screws
and switches and large semiconductor devices. Given the excellent
webpage suggested by someone else, there is little truly worthwhile
stuff in that printer.

i

Thanks
Roger Haar

Ignoramus26555 wrote:

At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

i


--
Click to expand...
 
Your local thrift will often take these if working.
Click to expand...
They just groaned. Take a couple of friends and lift a 5si sometime. Not to
mention that the cost of expendables for them is horrendous.
 
In message <BZBue.7109$016.1773@fe09.usenetserver.com>, Ignoramus26555
<ignoramus26555@NOSPAM.26555.invalid> writes
At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

i

Probably a couple of nice steppers, if it's got a duplex unit maybe a
Click to expand...
couple more, loads of gearwheels, a few solenoids maybe a synchronous
belt and associated pulleys, the drive electronics for said steppers and
solenoids and my favourite bit, a laser scanner assembly with some nice
quality mirrors, lenses and a nice rotating mirror (could be hexagonal,
octagonal or a twin faced unit) The PSU's (HV and DC) *might* be useful
to you but I'd be surprised.
--
Clint Sharp
 
The toner cartridge, even if it is empty is worth some money!

"Ignoramus26555" <ignoramus26555@NOSPAM.26555.invalid> wrote in message
news:BZBue.7109$016.1773@fe09.usenetserver.com...
At my work, they are throwing away a HP LaserJet 5SI printer. I am
thinking that perhaps there is something valuable here, like stepper
motors or whatever that I can salvage for my "projects". Any
suggestions?

i
Click to expand...
 
BrotherBart wrote:
Your local thrift will often take these if working.


They just groaned. Take a couple of friends and lift a 5si sometime. Not to
mention that the cost of expendables for them is horrendous.





A 5SIMX with PostScript, duplexer, and a hard drive remains an excellent
Click to expand...
BOD machine.

The regular 5Si ain't all that great.

--
Many thanks,

Don Lancaster
Synergetics 3860 West First Street Box 809 Thatcher, AZ 85552
voice: (928)428-4073 email: don@tinaja.com

Please visit my GURU's LAIR web site at http://www.tinaja.com
 
Don Lancaster wrote:

A 5SIMX with PostScript, duplexer, and a hard drive remains an
excellent BOD machine.
Click to expand...
We find that the old 4100 and 4200 series printers are currently the best HP
printers. The 5SSi is nothing more than a dinosaur that takes up too much
space. Make an attempt to find a sucker locally for $100 cash or toss it.



Rita
 
Rita Ä Berkowitz wrote:
Don Lancaster wrote:


A 5SIMX with PostScript, duplexer, and a hard drive remains an
excellent BOD machine.


We find that the old 4100 and 4200 series printers are currently the best HP
printers. The 5SSi is nothing more than a dinosaur that takes up too much
space. Make an attempt to find a sucker locally for $100 cash or toss it.



Rita



The story changes wildly if you go over 150,000 pages per month.
Click to expand...


--
Many thanks,

Don Lancaster
Synergetics 3860 West First Street Box 809 Thatcher, AZ 85552
voice: (928)428-4073 email: don@tinaja.com

Please visit my GURU's LAIR web site at http://www.tinaja.com
 
In article
<1gEue.351468$cg1.315019@bgtnsc04-news.ops.worldnet.att.net>, Ace
<thermo102@worldnet.att.net> wrote:

I didn't bother to ask the question you are asking. I simply tore down a
couple of obsolete printers
and kept what looked interesting.

When a third printer came along, I simply trashed it, along with most of the
parts that looked "interesting"
from the first two printers.
Click to expand...
That's the real answer.

I still have a cigar box of parts from an old Wang word processor circa
1967 laying around here somewhere. Lots of interesting stuff in there.
I kept most of it in bigger boxes that gradually got thrown out until
all I have left is the cigar box, mostly odd springs and metal screws.

I did not use a single part from that Wang in oll the time I kept them.
Not a spring, not a screw, not a shaft or a motor or a washer.

-Frank

--
fwarner1-at-franksknives-dot-com
Here's some of my work:
http://www.franksknives.com/
 
Don Lancaster wrote:

The story changes wildly if you go over 150,000 pages per month.
Click to expand...
Yep, they are good for that, but you'll be very hard pressed to find one
that has a total page count of over 150,000. Anybody that's going to be
printing a lot of pages would have used a LaserJet 4. I've had some that
exceeded 400,000 total pages. The LaserJet 4 was the only really reliable
and bulletproof printer HP ever made. Slow as cat shit, but indestructible.



Rita
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top