EDAboard.com | EDAboard.de | EDAboard.co.uk | WTWH Media

Philips PM2525 service manual request

Ask a question - edaboard.com

elektroda.net NewsGroups Forum Index - Electronics Equipment - Philips PM2525 service manual request

Philippe Lemaire
Guest

Thu Apr 01, 2010 3:39 pm   



Dear all,

has someone a copy of this manual to be made available ?
Or the instruction to proceed through the calibration ?


Thanks in advance,


Philippe

otro JJ
Guest

Fri Apr 02, 2010 12:13 am   



On Thu, 1 Apr 2010 16:39:13 +0200, Philippe Lemaire
<philippe.lemaire_at_centexbel.be> wrote:

Quote:
Dear all,

has someone a copy of this manual to be made available ?
Or the instruction to proceed through the calibration ?


You know BAMA?


See user manual in

http://bama.edebris.com/manuals/philips/pm2525/

Greetings

Philippe Lemaire
Guest

Fri Apr 02, 2010 7:47 am   



In article <b1aar5pbim3chhb4i4r0b78e250kl1p43c_at_4ax.com>,
noquiero_at_spam.no says...
Quote:
On Thu, 1 Apr 2010 16:39:13 +0200, Philippe Lemaire
philippe.lemaire_at_centexbel.be> wrote:

Dear all,

has someone a copy of this manual to be made available ?
Or the instruction to proceed through the calibration ?


You know BAMA?

See user manual in

http://bama.edebris.com/manuals/philips/pm2525/

Greetings



Thanks !

I previously downloaded it just in case it was not the user manual
but the service manual.

Unfortunately, it was the user manual which I already have on paper :-
( !

The service manual seems far more difficult to find...
And Fluke will not calibrate it even for money !


Regards,


Philippe

otro JJ
Guest

Fri Apr 02, 2010 9:02 pm   



On Fri, 2 Apr 2010 08:47:44 +0200, Philippe Lemaire
<philippe.lemaire_at_centexbel.be> wrote:

Quote:
Thanks !

I previously downloaded it just in case it was not the user manual
but the service manual.

Unfortunately, it was the user manual which I already have on paper :-
( !

The service manual seems far more difficult to find...
And Fluke will not calibrate it even for money !

Try


http://www.free-service-manuals.com/Measuring___Test_Equipment/Philips/Philips_PM2525_Service_Manual_L78723/

is necessary pay for acces.

http://www.free-service-manuals.com/mm2/register.php

Good luck

Philippe Lemaire
Guest

Wed Apr 07, 2010 11:07 am   



In article <msicr5tl6bhg0g9k64dm75ua1dsc4fvmms_at_4ax.com>,
noquiero_at_spam.no says...
Quote:
On Fri, 2 Apr 2010 08:47:44 +0200, Philippe Lemaire
philippe.lemaire_at_centexbel.be> wrote:

Thanks !

I previously downloaded it just in case it was not the user manual
but the service manual.

Unfortunately, it was the user manual which I already have on paper :-
( !

The service manual seems far more difficult to find...
And Fluke will not calibrate it even for money !

Try

http://www.free-service-manuals.com/Measuring___Test_Equipment/Philips/Philips_PM2525_Service_Manual_L78723/

is necessary pay for acces.

http://www.free-service-manuals.com/mm2/register.php

Good luck



Thanks again !

Not that easy for companies to buy with Paypal from unspecified
companies...


Philippe

G. Canale
Guest

Thu May 20, 2010 7:45 am   



Hi to all.
I downloaded the service manual from FSM
Unfortunately it is missing of one page that is important to me, chapter 5
page14 15.
I am in trouble because my PM2525 indicates NC ( non calibrated ) on all
ranges.
Usually this is due to to the internal back up battery that in my case seems
in good conditions.
I have tried the calibration, it seems that there is a sequence to follow in
the calibration
but due to the missing page I do not know it.
Any suggestion
Thanks for the help
Gianfranco

"Philippe Lemaire" <philippe.lemaire_at_centexbel.be> ha scritto nel messaggio
news:MPG.262677d9d2d90ef0989686_at_news.evonet.be...
Quote:
In article <msicr5tl6bhg0g9k64dm75ua1dsc4fvmms_at_4ax.com>,
noquiero_at_spam.no says...
On Fri, 2 Apr 2010 08:47:44 +0200, Philippe Lemaire
philippe.lemaire_at_centexbel.be> wrote:

Thanks !

I previously downloaded it just in case it was not the user manual
but the service manual.

Unfortunately, it was the user manual which I already have on paper :-
( !

The service manual seems far more difficult to find...
And Fluke will not calibrate it even for money !

Try

http://www.free-service-manuals.com/Measuring___Test_Equipment/Philips/Philips_PM2525_Service_Manual_L78723/

is necessary pay for acces.

http://www.free-service-manuals.com/mm2/register.php

Good luck



Thanks again !

Not that easy for companies to buy with Paypal from unspecified
companies...


Philippe


Philippe Lemaire
Guest

Thu May 20, 2010 12:55 pm   



In article <rU4Jn.171197$9f6.286496_at_twister1.libero.it>,
gf.canale_at_libero.it says...
Quote:
Hi to all.
I downloaded the service manual from FSM
Unfortunately it is missing of one page that is important to me, chapter 5
page14 15.
I am in trouble because my PM2525 indicates NC ( non calibrated ) on all
ranges.
Usually this is due to to the internal back up battery that in my case seems
in good conditions.
I have tried the calibration, it seems that there is a sequence to follow in
the calibration
but due to the missing page I do not know it.
Any suggestion
Thanks for the help
Gianfranco


They are missing in my copy too Sad !

I also have the NC display but have still not tried with
recalibration.

Hopefully, this page is somewhere...



Philippe

G. Canale
Guest

Fri May 21, 2010 8:18 am   



I tried the calibration that is very time consuming.
I started with calibration of DC voltage, 2V.
I made the cold calibration and the hot calibration.
Everything vas OK.
Then I went out of the calibration procedure and returned to the measurement
..
The NC is still there.
I do not understand why.
I suspect that the calibrations must be done in a defined sequence but I
dont know which and the page in the manual is missing.
I am trapped.
Any suggestion ?

--
Ciao
Gianfranco
"Philippe Lemaire" <philippe.lemaire_at_centexbel.be> ha scritto nel messaggio
news:MPG.265f4184a019df14989687_at_news.evonet.be...
Quote:
In article <rU4Jn.171197$9f6.286496_at_twister1.libero.it>,
gf.canale_at_libero.it says...
Hi to all.
I downloaded the service manual from FSM
Unfortunately it is missing of one page that is important to me, chapter
5
page14 15.
I am in trouble because my PM2525 indicates NC ( non calibrated ) on all
ranges.
Usually this is due to to the internal back up battery that in my case
seems
in good conditions.
I have tried the calibration, it seems that there is a sequence to follow
in
the calibration
but due to the missing page I do not know it.
Any suggestion
Thanks for the help
Gianfranco


They are missing in my copy too Sad !

I also have the NC display but have still not tried with
recalibration.

Hopefully, this page is somewhere...



Philippe


elektroda.net NewsGroups Forum Index - Electronics Equipment - Philips PM2525 service manual request

Ask a question - edaboard.com

Arabic version Bulgarian version Catalan version Czech version Danish version German version Greek version English version Spanish version Finnish version French version Hindi version Croatian version Indonesian version Italian version Hebrew version Japanese version Korean version Lithuanian version Latvian version Dutch version Norwegian version Polish version Portuguese version Romanian version Russian version Slovak version Slovenian version Serbian version Swedish version Tagalog version Ukrainian version Vietnamese version Chinese version Turkish version
EDAboard.com map