EDAboard.com | EDAboard.eu | EDAboard.de | EDAboard.co.uk | RTV forum PL | NewsGroups PL

My history

Ask a question - edaboard.com

elektroda.net NewsGroups Forum Index - Electronics AUS - My history

Goto page 1, 2  Next


Guest

Sun Jan 08, 2017 8:30 am   



I have been designing and building various devices from a multi channel mixer with all the hardware to hold an outdoor concert. I also have origional laser lights etc. My last project was a 1000 watt ultralinear twin channel valve amplifier.
All the work i have ever done was my own i used magazines like eti for inspiration only many articles had serious errors in their calculations. And some magazines their products were at a standard i wouldnt waste my time building. I am fully self educated learnt the hard way. Now got spreadsheets and the like. Making it much easier to design a piece of equipment. I was willing to share some knowledge but not now a few idiots has changed my mind.


Guest

Sun Jan 08, 2017 12:09 pm   



My spelling is just fine it is the keyboard it is dyslexic.
Anyway whats the big deal about a typo you twit. Get over yourself mr perfect. NOT


Guest

Sun Jan 08, 2017 12:23 pm   



1000 watt valve amps have always been plugged into a very large alternator. I couldn't state how many amps the pair draw it was just a number when i built them. Just not important enough to remember.
Then could someone out there tell me the biggest amplifier that has been built?


Guest

Sun Jan 08, 2017 1:07 pm   



Anyway the 1000 watt pair i built you need quite a few speakers to take the wattage. Not to mention the transformers i just built it not interested in the manhandleing of it. I think the transformers are over 90kg each.
The biggest valve amps were used to transmit am radio signals 20000 not uncommon i think 40000 was about the biggest. Could be why they went to fm radio.


Guest

Sun Jan 08, 2017 1:27 pm   



I have just bought a pair of behringer inuke6000dsp amplifiers trying to get it into my head how to program the mixer to make full use of the amplifier. At the moment i can run them at 1.2k top speakers 1.6k for the subs (each) mixer is a behringer x32 connected to a digital snake. I have got it all working to date including the wifi used to connect smart phone. My 30 year old mixer is now not needed.


Guest

Sun Jan 08, 2017 1:29 pm   



Yea browser is showing hypertext puntuation

Lucifer Morningstar
Guest

Sun Jan 08, 2017 3:17 pm   



On Sat, 7 Jan 2017 23:03:04 -0800 (PST), womby1954_at_gmail.com wrote:

Quote:
I have been designing and building various devices from a multi channel mix=
er with all the hardware to hold an outdoor concert. I also have origional =
laser lights etc. My last project was a 1000 watt ultralinear twin channel =
valve amplifier.
All the work i have ever done was my own i used magazines like eti for insp=
iration only many articles had serious errors in their calculations. And so=
me magazines their products were at a standard i wouldnt waste my time buil=
ding. I am fully self educated learnt the hard way. Now got spreadsheets an=
d the like. Making it much easier to design a piece of equipment. I was wil=
ling to share some knowledge but not now a few idiots has changed my mind.


All that and you still can't get your puctuation and spelling
right and what is with the = at the end of each line?

--
I call shenanigans on all theistic religions

Trevor Wilson
Guest

Sun Jan 08, 2017 4:24 pm   



On 8/01/2017 6:03 PM, womby1954_at_gmail.com wrote:
Quote:
I have been designing and building various devices from a multi
channel mixer with all the hardware to hold an outdoor concert. I
also have origional laser lights etc. My last project was a 1000 watt
ultralinear twin channel valve amplifier.


**100 Watts? Per channel? I doubt that very much. Unless it was plugged
into three phase power.

--
Trevor Wilson
www.rageaudio.com.au

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Trevor Wilson
Guest

Sun Jan 08, 2017 4:26 pm   



On 8/01/2017 7:17 PM, Lucifer Morningstar wrote:
Quote:
On Sat, 7 Jan 2017 23:03:04 -0800 (PST), womby1954_at_gmail.com wrote:

I have been designing and building various devices from a multi channel mix=
er with all the hardware to hold an outdoor concert. I also have origional =
laser lights etc. My last project was a 1000 watt ultralinear twin channel =
valve amplifier.
All the work i have ever done was my own i used magazines like eti for insp=
iration only many articles had serious errors in their calculations. And so=
me magazines their products were at a standard i wouldnt waste my time buil=
ding. I am fully self educated learnt the hard way. Now got spreadsheets an=
d the like. Making it much easier to design a piece of equipment. I was wil=
ling to share some knowledge but not now a few idiots has changed my mind.

All that and you still can't get your puctuation and spelling
right and what is with the = at the end of each line?


**Might be something to do with your newsreader, attempting line-wrap. I
don't see it on mine, but I manually alter the line-wrap.

--
Trevor Wilson
www.rageaudio.com.au

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Trevor Wilson
Guest

Sun Jan 08, 2017 4:55 pm   



On 8/01/2017 8:24 PM, Trevor Wilson wrote:
Quote:
On 8/01/2017 6:03 PM, womby1954_at_gmail.com wrote:
I have been designing and building various devices from a multi
channel mixer with all the hardware to hold an outdoor concert. I
also have origional laser lights etc. My last project was a 1000 watt
ultralinear twin channel valve amplifier.

**100 Watts?


**Oops. Should read: "1,000 Watts?"


--
Trevor Wilson
www.rageaudio.com.au

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

F Murtz
Guest

Sun Jan 08, 2017 5:29 pm   



Trevor Wilson wrote:
Quote:
On 8/01/2017 7:17 PM, Lucifer Morningstar wrote:
On Sat, 7 Jan 2017 23:03:04 -0800 (PST), womby1954_at_gmail.com wrote:

I have been designing and building various devices from a multi
channel mix=
er with all the hardware to hold an outdoor concert. I also have
origional =
laser lights etc. My last project was a 1000 watt ultralinear twin
channel =
valve amplifier.
All the work i have ever done was my own i used magazines like eti
for insp=
iration only many articles had serious errors in their calculations.
And so=
me magazines their products were at a standard i wouldnt waste my
time buil=
ding. I am fully self educated learnt the hard way. Now got
spreadsheets an=
d the like. Making it much easier to design a piece of equipment. I
was wil=
ling to share some knowledge but not now a few idiots has changed my
mind.

All that and you still can't get your puctuation and spelling
right and what is with the = at the end of each line?


**Might be something to do with your newsreader, attempting line-wrap. I
don't see it on mine, but I manually alter the line-wrap.

The equals were not on the original from the op on mine but appeared in
lucifer's reply.Neither has your lines on this page.

F Murtz
Guest

Sun Jan 08, 2017 5:31 pm   



womby1954_at_gmail.com wrote:
Quote:
1000 watt valve amps have always been plugged into a very large alternator. I couldn't state how many amps the pair draw it was just a number when i built them. Just not important enough to remember.
Then could someone out there tell me the biggest amplifier that has been built?

Ask Trevor that is the business he is in.


Clocky
Guest

Sun Jan 08, 2017 5:36 pm   



On 8/01/2017 4:17 PM, Lucifer Morningstar wrote:
Quote:
On Sat, 7 Jan 2017 23:03:04 -0800 (PST), womby1954_at_gmail.com wrote:

I have been designing and building various devices from a multi channel mix=
er with all the hardware to hold an outdoor concert. I also have origional =
laser lights etc. My last project was a 1000 watt ultralinear twin channel =
valve amplifier.
All the work i have ever done was my own i used magazines like eti for insp=
iration only many articles had serious errors in their calculations. And so=
me magazines their products were at a standard i wouldnt waste my time buil=
ding. I am fully self educated learnt the hard way. Now got spreadsheets an=
d the like. Making it much easier to design a piece of equipment. I was wil=
ling to share some knowledge but not now a few idiots has changed my mind.

All that and you still can't get your puctuation and spelling
right and what is with the = at the end of each line?


They weren't there until you replied.

Gary R. Schmidt
Guest

Sun Jan 08, 2017 9:09 pm   



On 08/01/2017 22:29, womby1954_at_gmail.com wrote:
Quote:
Yea browser is showing hypertext puntuation

You are using googlegroups - please don't.


Get a real Usenet UA, find an NSP, and do it properly.

Cheers,
Gary B-)

--
When men talk to their friends, they insult each other.
They don't really mean it.
When women talk to their friends, they compliment each other.
They don't mean it either.

Xeno
Guest

Mon Jan 09, 2017 8:30 am   



On 8/01/2017 9:36 PM, Clocky wrote:
Quote:
On 8/01/2017 4:17 PM, Lucifer Morningstar wrote:
On Sat, 7 Jan 2017 23:03:04 -0800 (PST), womby1954_at_gmail.com wrote:

I have been designing and building various devices from a multi
channel mix=
er with all the hardware to hold an outdoor concert. I also have
origional =
laser lights etc. My last project was a 1000 watt ultralinear twin
channel =
valve amplifier.
All the work i have ever done was my own i used magazines like eti
for insp=
iration only many articles had serious errors in their calculations.
And so=
me magazines their products were at a standard i wouldnt waste my
time buil=
ding. I am fully self educated learnt the hard way. Now got
spreadsheets an=
d the like. Making it much easier to design a piece of equipment. I
was wil=
ling to share some knowledge but not now a few idiots has changed my
mind.

All that and you still can't get your puctuation and spelling
right and what is with the = at the end of each line?


They weren't there until you replied.


Noticed that here too. Wink


Someone should be checking the configuration of their newsreader and
it's not the OP.

--

Xeno

First they ignore you,
Then they ridicule you,
Then they fight you,
Then you win.

Mahatma Ghandi

Goto page 1, 2  Next

elektroda.net NewsGroups Forum Index - Electronics AUS - My history

Ask a question - edaboard.com

Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
RTV map EDAboard.com map News map EDAboard.eu map EDAboard.de map EDAboard.co.uk map