EDAboard.com | EDAboard.eu | EDAboard.de | EDAboard.co.uk | RTV forum PL | NewsGroups PL

[?] Looking for user manual on Micronta 4001 (ex Tandy) meta

Ask a question - edaboard.com

elektroda.net NewsGroups Forum Index - Electronics Equipment - [?] Looking for user manual on Micronta 4001 (ex Tandy) meta

David Chapman
Guest

Fri Aug 19, 2005 9:01 am   



Hi,

Can anyone suggest where I can obtain a copy of the user manual for a
very ancient Micronta 4001 metal detector that was sold in the UK many
years ago by Tandy stores?

Yes, I know it's out of the Ark but at least it'll be useful for
keeping the grandchildren quiet for a few hours. ;-)

TIA - Dave


David C.Chapman - (dcchapman_at_minda.co.uk)
--------------------------------------------------------------------------

David Chapman
Guest

Fri Aug 19, 2005 9:45 am   



In article <1h1jh9y.159267ggye8zwN%nowhere_at_nowhere.com>, Sean Sharkey
<nowhere_at_nowhere.com> writes
Quote:
David Chapman <dave_at_minda.co.uk> wrote:

Can anyone suggest where I can obtain a copy of the user manual for a
very ancient Micronta 4001 metal detector that was sold in the UK many
years ago by Tandy stores?

You might want to have a look at;

http://support.radioshack.com/productinfo/ProductResults.asp?Name=Metal_
Detectors&ID=009003

See if it's one of the manuals listed.

Thanks Sean, but that was the first place that I looked, without
success, hence my posting.

ATB - Dave

David C.Chapman - (dcchapman_at_minda.co.uk)
--------------------------------------------------------------------------

Sean Sharkey
Guest

Fri Aug 19, 2005 11:30 am   



David Chapman <dave_at_minda.co.uk> wrote:

Quote:
Can anyone suggest where I can obtain a copy of the user manual for a
very ancient Micronta 4001 metal detector that was sold in the UK many
years ago by Tandy stores?

You might want to have a look at;

http://support.radioshack.com/productinfo/ProductResults.asp?Name=Metal_
Detectors&ID=009003

See if it's one of the manuals listed.


Sean.

Trevor Day
Guest

Fri Aug 19, 2005 11:33 am   



In message <MP+$hKA23aBDFw+7_at_chassis.demon.co.uk>, David Chapman
<dave_at_minda.co.uk> writes
Quote:

Hi,

Can anyone suggest where I can obtain a copy of the user manual for a
very ancient Micronta 4001 metal detector that was sold in the UK many
years ago by Tandy stores?

Yes, I know it's out of the Ark but at least it'll be useful for
keeping the grandchildren quiet for a few hours. ;-)

TIA - Dave


David C.Chapman - (dcchapman_at_minda.co.uk)
--------------------------------------------------------------------------
Forgive me for asking Dave but what is it about this particular model

that needs a manual to use it? Most of the cheaper end models I have
seen seem pretty intuitive.

Trev
--
Trevor Day
UKSMG #217
www.uksmg.org

David Chapman
Guest

Fri Aug 19, 2005 11:52 am   



Quote:
Forgive me for asking Dave but what is it about this particular model
that needs a manual to use it? Most of the cheaper end models I have
seen seem pretty intuitive.

Trev

Yes, it seems to be working OK but I'd like to get clarification of
the function of a red push-button mounted on the carrying handle. This
seems to set the detection threshold and affects the adjustment of the
'Discriminator' control.

Quite simply, I'd rather like to RTFM. ;-)

- Dave

David C.Chapman - (dcchapman_at_minda.co.uk)
--------------------------------------------------------------------------

David Morgan
Guest

Fri Aug 19, 2005 4:22 pm   



David Chapman wrote:
Quote:
Hi,

Can anyone suggest where I can obtain a copy of the user manual for a
very ancient Micronta 4001 metal detector that was sold in the UK many
years ago by Tandy stores?


There's a manual for the Micronta 3001 and 3003/4003 here
http://website.lineone.net/~johngl1/page9.html

They might be similar enough to the 4001 to help you.

--
David

Fred McKenzie
Guest

Sun Aug 28, 2005 5:04 pm   



In article <L8oEoUAUYdBDFwtP_at_chassis.demon.co.uk>, David Chapman
<dave_at_minda.co.uk> wrote:

Quote:
Yes, it seems to be working OK but I'd like to get clarification of
the function of a red push-button mounted on the carrying handle. This
seems to set the detection threshold and affects the adjustment of the
'Discriminator' control.

Dave-

If you search by the catalog number instead of just the "4001", you may
find more information.

As others suggested, the 4003 manual might help if you can't find the 4001.

I have the Micronta 4003, catalog number 63-3003. The red button is for
"auto tune", used to return the meter to zero when it drifts. It is first
set to zero with the coil in mid-air, using the Tune contol.

Fred


Guest

Thu Jul 21, 2016 2:00 am   



I have one. The most useful thing about the manual is the Complete circuit diagram. Ill try to get it scanned in the next few days and archive it somewhere.

Adrian Caspersz
Guest

Sat Jul 23, 2016 4:27 pm   



On 21/07/16 01:00, meat666000_at_gmail.com wrote:
Quote:
I have one. The most useful thing about the manual is the Complete circuit diagram. Ill try to get it scanned in the next few days and archive it somewhere.


It's likely after 11 years (original post) to be buried in landfill, so
perhaps if you post this, someone can build a replica and use it to find
the original (and fix it).

--
Adrian C


Guest

Mon Jul 25, 2016 7:40 pm   



Le jeudi 21 juillet 2016 02:00:31 UTC+2, meat6...@gmail.com a écrit :
> I have one. The most useful thing about the manual is the Complete circuit diagram. Ill try to get it scanned in the next few days and archive it somewhere.

Dear,

If you could send me a copy of the manual...
I have an old Micronta 4001 still working but no idea how to !

Regards,
Laurent (France - Lyon)

John Robertson
Guest

Tue Jul 26, 2016 2:37 am   



On 07/20/2016 5:00 PM, meat666000_at_gmail.com wrote:
Quote:
I have one. The most useful thing about the manual is the Complete circuit diagram. Ill try to get it scanned in the next few days and archive it somewhere.


archive.org is one place you could send it...

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."

jeanyves
Guest

Tue Jul 26, 2016 12:31 pm   



On 2016-07-25 17:40:56 +0000, laurent.bonnin69_at_gmail.com said:

Quote:
Le jeudi 21 juillet 2016 02:00:31 UTC+2, meat6...@gmail.com a crit:
I have one. The most useful thing about the manual is the Complete
circuit diagram. Ill try to get it scanned in the next few days and
archive it somewhere.

Dear,

If you could send me a copy of the manual...
I have an old Micronta 4001 still working but no idea how to !

Regards,
Laurent (France - Lyon)


just google "micronta 4001 schematic" and you will get it !
--

Jean-Yves.

elektroda.net NewsGroups Forum Index - Electronics Equipment - [?] Looking for user manual on Micronta 4001 (ex Tandy) meta

Ask a question - edaboard.com

Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
RTV map EDAboard.com map News map EDAboard.eu map EDAboard.de map EDAboard.co.uk map