Looking for a decent FPGA board with multiple Xilinx Virtex

Mon Nov 14, 2011 2:04 pm   

Hi,
I am looking for a decent PCIe (Gen1 & Gen2) based FPGA board with
preferably 2 Xilinx Virtex 5 FPGAs on it. A 2GB DDR2 SODIMM and
minimum 256 MB RAM is preferred. Other onboard periphals may include
gigbit ethernet and a USB 2.0. FPGAs must be Virtex-5 LX330T or higher
capacity. Other than that nothing much is actually required. I have
been searching for such a board but most of them are packed with other
peripherals making them too costly. I basically need 2 (or more) V5
LX330T FPGAs on a board with PCIe (x with 2GB DDR2 and 256 or higher
RAM. Any suggestions please........

Fri Nov 18, 2011 7:27 am   

On Nov 14, 5:04 pm, maverick <sheikh.m.far...@gmail.com> wrote:

To add further, I was initially using Avnet Virtex 5 Development board
with V5 LXT110-4 FPGA (AES-XLX-V5LXT-PCIE110-G). Now I need a board
with a bigger FPGA. The same board with V5 LXT330 could have solved my
problem but unfortunately that particular FPGA board is discontinued
and no more available from Avnet. Since my initial development took
place on the LXT110 board, I would like to have a replacement which is
closer to the original Avnet board so that the migration time is
reduced as much as possible. Please suggest.......