Gazz
Guest
Sun Feb 28, 2010 5:20 pm
simple on this i hope,
i have a simple disco light in my games room, a 50 watt halogen light (12
volts i believe) shines onto a parabolic shaped disc covered with coloured
mirror tiles, the disc rotated in time with the music, and projects a
swirling pattern of light on the wall and floor.
i'd like to keep my power consumption low as all my machines pull a fair few
(hundred of) watts each, so i was thinking of replacing the halogen bulb
with a led array.
i'm guessing i need to be thinking of luxeon type led's, but what light
output leds would i need?
distance from the bulb holder to the mirror is about 3 inches, then it's
reflected light is shone through a lens behind the bulb holder, so i imagine
i'll need a few led's to cover the entire mirror surface (about 4 inches in
diamiter)
Guest
Sun Feb 28, 2010 6:22 pm
On Sun, 28 Feb 2010 16:20:08 -0000, "Gazz" <N_at_spam.ta>wrote:
Quote:
simple on this i hope,
i have a simple disco light in my games room, a 50 watt halogen light (12
volts i believe) shines onto a parabolic shaped disc covered with coloured
mirror tiles, the disc rotated in time with the music, and projects a
swirling pattern of light on the wall and floor.
i'd like to keep my power consumption low as all my machines pull a fair few
(hundred of) watts each, so i was thinking of replacing the halogen bulb
with a led array.
i'm guessing i need to be thinking of luxeon type led's, but what light
output leds would i need?
distance from the bulb holder to the mirror is about 3 inches, then it's
reflected light is shone through a lens behind the bulb holder, so i imagine
i'll need a few led's to cover the entire mirror surface (about 4 inches in
diamiter)
An array of five, 3 watt Luxeon III devices would probably do it.
Arfa Daily
Guest
Mon Mar 01, 2010 3:15 am
"Gazz" <N_at_spam.ta> wrote in message
news:hme53r$s0r$1_at_news.eternal-september.org...
Quote:
simple on this i hope,
i have a simple disco light in my games room, a 50 watt halogen light (12
volts i believe) shines onto a parabolic shaped disc covered with coloured
mirror tiles, the disc rotated in time with the music, and projects a
swirling pattern of light on the wall and floor.
i'd like to keep my power consumption low as all my machines pull a fair
few (hundred of) watts each, so i was thinking of replacing the halogen
bulb with a led array.
i'm guessing i need to be thinking of luxeon type led's, but what light
output leds would i need?
distance from the bulb holder to the mirror is about 3 inches, then it's
reflected light is shone through a lens behind the bulb holder, so i
imagine i'll need a few led's to cover the entire mirror surface (about 4
inches in diamiter)
I think if I was you, I would stick with the halogen bulb. Apart from the
difficulties with correctly driving Luxeon (or similar) high power LEDs, I
think that you will be disappointed with the resulting performance. Optics
designed for use with a point source omni-directional light such as a
filament bulb, do not work well with narrow angle flat plane sources such as
LEDs or LED arrays.
Arfa
GregS
Guest
Mon Mar 01, 2010 3:15 pm
In article <hme53r$s0r$1_at_news.eternal-september.org>, "Gazz" <N_at_spam.ta> wrote:
Quote:
simple on this i hope,
i have a simple disco light in my games room, a 50 watt halogen light (12
volts i believe) shines onto a parabolic shaped disc covered with coloured
mirror tiles, the disc rotated in time with the music, and projects a
swirling pattern of light on the wall and floor.
i'd like to keep my power consumption low as all my machines pull a fair few
(hundred of) watts each, so i was thinking of replacing the halogen bulb
with a led array.
i'm guessing i need to be thinking of luxeon type led's, but what light
output leds would i need?
distance from the bulb holder to the mirror is about 3 inches, then it's
reflected light is shone through a lens behind the bulb holder, so i imagine
i'll need a few led's to cover the entire mirror surface (about 4 inches in
diamiter)
To replace a halogen color use this....
http://ledsupply.com/creexre-ww.php
Get some lens, narrow is probably what you want. Drive
it to 700 ma. and use heat sinking. Start out with one,
and go from there.
greg
GregS
Guest
Mon Mar 01, 2010 3:16 pm
In article <hmghug$c60$1_at_usenet01.srv.cis.pitt.edu>, zekfrivo_at_zekfrivolous.com (GregS) wrote:
Quote:
In article <hme53r$s0r$1_at_news.eternal-september.org>, "Gazz" <N_at_spam.ta> wrote:
simple on this i hope,
i have a simple disco light in my games room, a 50 watt halogen light (12
volts i believe) shines onto a parabolic shaped disc covered with coloured
mirror tiles, the disc rotated in time with the music, and projects a
swirling pattern of light on the wall and floor.
i'd like to keep my power consumption low as all my machines pull a fair few
(hundred of) watts each, so i was thinking of replacing the halogen bulb
with a led array.
i'm guessing i need to be thinking of luxeon type led's, but what light
output leds would i need?
distance from the bulb holder to the mirror is about 3 inches, then it's
reflected light is shone through a lens behind the bulb holder, so i imagine
i'll need a few led's to cover the entire mirror surface (about 4 inches in
diamiter)
To replace a halogen color use this....
http://ledsupply.com/creexre-ww.php
Get some lens, narrow is probably what you want. Drive
it to 700 ma. and use heat sinking. Start out with one,
and go from there.
greg
500 ma. would be a safer current to start out with, thats
about 3 watts, ther real rating of the device.
greg
Geoffrey S. Mendelson
Guest
Mon Mar 01, 2010 4:34 pm
Gazz wrote:
Quote:
simple on this i hope,
A different approach:
http://makezine.com/20/lunchboxen/
Geoff.
--
Geoffrey S. Mendelson, Jerusalem, Israel gsm_at_mendelson.com N3OWJ/4X1GM
New word I coined 12/13/09, "Sub-Wikipedia" adj, describing knowledge or
understanding, as in he has a sub-wikipedia understanding of the situation.
i.e possessing less facts or information than can be found in the Wikipedia.
