integration problems

Sun Apr 18, 2010 6:26 am   

Hi all,
I am assembling a pc motherboard with a signal processing board into
an enclosure which requires high protection against extreme
temperature and pressure. The assembly will left working for a few
days unattended. I need a battery that can fit into the enclosure and
supply power to the boards for atleast a month. Which batteries are
suitable for this purpose and what are common problems that occur in
such an assembly (things that I should remember when integrating the
whole setup). I am using an industrial computer motherboard and some
sort of ruggedness for enclosure but I would like not to miss any
important things. I would appreciate any pointers to documents or
suggestions.

Thanks in advance.
Romesh.

Sun Apr 18, 2010 11:40 am   

On 2010-04-18, romesh <romeshkulasekhara_at_gmail.com> wrote:

stuff melts when it gets hot struff cracks under pressure if it
contains voids,

I suggest you put a figure on "extreme".


--- news://freenews.netfront.net/ - complaints: news_at_netfront.net ---