EDAboard.com | EDAboard.eu | EDAboard.de | EDAboard.co.uk | RTV forum PL | NewsGroups PL

How To Set Time On Spy Clock DVR

Ask a question - edaboard.com

elektroda.net NewsGroups Forum Index - Electronics AUS - How To Set Time On Spy Clock DVR

RMD
Guest

Fri Jan 31, 2014 8:30 am   



How To Adjust Spy Clock DVR Time/Date:

The time and date of your alarm clock DVR can be configured by the
following steps.
1 - Install the driver "SPCA1520_V1200_WHQL.exe" in the included CD.

_Note_, it will be necessary to move "SPCA1520_V1200_WHQL.exe" onto
the computer from the CD, otherwise there is a run-time error.

2 - Turn off the camera and take out the microSD card, then connect
the clock to the PC via the mini USB cable. Once the drivers have been
installed, you will be able to use the clock in Webcam mode.

3 - Run "SyncTime.exe" then click "Synchronization". Now the
recordings will show the same time as your PC.

I'm posting this because I found the instructions supplied with my spy
clock DVR were rather inadequate.

I hope this might help somebody else avoid some trouble.

Ross


Guest

Wed Dec 23, 2015 10:40 pm   



vineri, 31 ianuarie 2014, 08:03:04 UTC+2, RMD a scris:
Quote:
How To Adjust Spy Clock DVR Time/Date:

The time and date of your alarm clock DVR can be configured by the
following steps.
1 - Install the driver "SPCA1520_V1200_WHQL.exe" in the included CD.

_Note_, it will be necessary to move "SPCA1520_V1200_WHQL.exe" onto
the computer from the CD, otherwise there is a run-time error.

2 - Turn off the camera and take out the microSD card, then connect
the clock to the PC via the mini USB cable. Once the drivers have been
installed, you will be able to use the clock in Webcam mode.

3 - Run "SyncTime.exe" then click "Synchronization". Now the
recordings will show the same time as your PC.

I'm posting this because I found the instructions supplied with my spy
clock DVR were rather inadequate.

I hope this might help somebody else avoid some trouble.

Ross
THANKS YOU



Guest

Tue Jun 28, 2016 1:24 am   



On Friday, January 31, 2014 at 1:03:04 AM UTC-5, RMD wrote:
Quote:
How To Adjust Spy Clock DVR Time/Date:

The time and date of your alarm clock DVR can be configured by the
following steps.
1 - Install the driver "SPCA1520_V1200_WHQL.exe" in the included CD.

_Note_, it will be necessary to move "SPCA1520_V1200_WHQL.exe" onto
the computer from the CD, otherwise there is a run-time error.

2 - Turn off the camera and take out the microSD card, then connect
the clock to the PC via the mini USB cable. Once the drivers have been
installed, you will be able to use the clock in Webcam mode.

3 - Run "SyncTime.exe" then click "Synchronization". Now the
recordings will show the same time as your PC.

I'm posting this because I found the instructions supplied with my spy
clock DVR were rather inadequate.

I hope this might help somebody else avoid some trouble.

Ross


do you know how to increase recording time over the 20m?

elektroda.net NewsGroups Forum Index - Electronics AUS - How To Set Time On Spy Clock DVR

Ask a question - edaboard.com

Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
RTV map EDAboard.com map News map EDAboard.eu map EDAboard.de map EDAboard.co.uk map