EDAboard.com | EDAboard.eu | EDAboard.de | EDAboard.co.uk | RTV forum PL | NewsGroups PL

Detailed Specification of IEEE802.11 MAC for Synthesis

Ask a question - edaboard.com

elektroda.net NewsGroups Forum Index - Synthesis - Detailed Specification of IEEE802.11 MAC for Synthesis

Goto page Previous  1, 2, 3

Tux Wonder-Dog
Guest

Sun May 01, 2005 11:39 am   



I agree, it would be a mercy killing.

Rick Osborn wrote:

Quote:
dang, what an annoying little bug. somebody slap him.

--
"Good, late in to more rewarding well."  "Well, you tonight.  And I was
lookintelligent woman of Ming home.  I trust you with a tender silence."  I
get a word into my hands, a different and unbelike, probably - 'she
fortunate fat woman', wrong word.  I think to me, I justupid.
Let not emacs meta-X dissociate-press write your romantic dialogs...!!!

Alvin Andries
Guest

Wed Jun 15, 2005 6:36 pm   



"cricketlover" <dpgulati_at_cs.utexas.edu> wrote in message
news:1117663768.902404.31350_at_g14g2000cwa.googlegroups.com...
Quote:
I am not sure if this is the right place to put this question. I have a
question about the formality tool from synopsis. If someone knows of a
better google group to post this message, please let me know.

The match and verify portion of formality's report sometimes reports
some "Unmatched unread points". Does anyone know what this means?

Thanks.


Hi,

An unread point is a point (mostly a register) that is not used by your
code. You might for instance compute a sum and register it but in the next
stage, you use only the most significant bits, so the least significant bits
become unread.
Unmatched means that Formality couldn't match it with a register in the
implementation design. Typically, this is because your synthesis tool has
removed the unread register (you can tell most tools to leave those
registers, but normally you don't want this).
So the real question is: did you expect the unread unmatched point(s) to be
unread? If so, all is fine, if not, check your code. Having said this, the
only place where this could matter is with some RAM BIST insertion flows
where cores might be inserted but only be connected later in the flow.

I hope this helped, if not, call your Formality FAE or check solvnet.

Regards,
Alvin Andries.

WEEB
Guest

Thu Mar 16, 2006 10:41 pm   



BC is out of date and end-of-lifed. Look at products that use the
System C standard, i.e. from Forte Design Systems (www.forteds.com) or
Mentor Graphics(www.mentor.com) for behavioral synthesis. Which tool
depends on your target device platform. Mentor is more suited towards
FPGA design, whereas Forte is for design ASICs and SoCs. Forte is
adding FPGA support and Mentor is probably adding some ASIC capability.

chrisbw_at_gmail.com wrote:
Quote:
It's not listed on Synopsys' product page. Is it EOL? Has BC
functionality been integrated into DC?



Guest

Tue May 16, 2006 1:42 pm   



Hi Moises,
After you compile your design, you can see your design's RTL view. You
can select the net in the RTL view ,drag and drop the net in the SCOPE
constraints editor and specify the clock frequency. Hope this will help
you to solve your problem.

Regards,
Srini.

Jogi
Guest

Wed Aug 16, 2006 9:39 am   



isn't this an unwelcome crap? Could we block such messages?

Jogi
-----
NSI wrote:
Quote:
Read this message until the end, and you will find out how the money flows in easy !!!!.
Follow the steps and it WILL work. Trust me !!!!!.

It's NOT illegal and it is NOT a scam !!!!!.

PROVEN ON OPRAH! Reported in the Wall Street Journal!!!!

The only thing you need is : - E-MAIL ACCOUNT
- PREMIER (FREE) or BUSINESS PAYPAL ACCOUNT
- $6 on this account (The only investment)
- 30 minutes of your time

There is no limit on how much money you can recieve, and you haven't got anything to lose with this Business program. I will explain how it works !!!!!.


Follow these 4 easy steps and it WILL work !!!!!.


STEP 1 : SIGN UP FOR A FREE PAYPAL ACCOUNT !!!!!.

Paypal is a free and safe way to pay and receive money on the Internet.
Creating a account is as easy as creating a MSN account.
Copy and paste the next line in your Internet browser and sign up.
HTTP://WWW.PAYPAL.COM

Be sure to sign up for a FREE Premier or Business account and not for a Personal account.
You cannot receive CREDITCARD payments with a Personal account and we can't have that. Do we !!!!!.


STEP 2 : SENT $6 TO YOUR PAYPAL ACCOUNT

This is your only investment to receive the money with ease.

With your Paypal account, send $1 to each e-mailadres listed below.
!!!!! IMPORTANT !!!!! Be sure to use this SUBJECT : *PLEASE PUT ME ON YOUR EMAIL LIST* when you send the money.

1) martine_at_pilote.net
2) dexxatol_at_netcourrier.com
3) armygirl8568_at_hotmail.com
4) comjii_at_starband.net
5) sinnek_at_bellsouth.net
6) nsi_at_nelasat.com

STEP 3 : PUT YOUR E-MAIL ADDRESS ON THE BOTTOM OF THE LIST

After you have send $1 to each e-mail address, put your e-mail address on the 6th place.
Remove e-mail address number 1, and move each e-mail address 1 step up the ladder.
!!!!! IMPORTANT !!!!! BE SURE THAT THE E-MAIL ADDRESS YOU USE IS THE SAME AS YOU USED TO SIGN UP AT PAYPAL.

Remember that this is LEGAL. You are creating a service : an e-mail servicelist.


STEP 4 : UPLOAD OR COPY THIS MESSAGE TO NEWSGROUPS, FORUMS ETC AND EMAIL IT TO ALL YOUR FRIENDS!

There are 32,000 newsgroups. Upload or copy this message to at least 200 newsgroups or forums etc, but ........ remember that the more your upload the more people will see your message and the MORE MONEY WILL FLOW IN.

How to upload to newsgroups and forums? :

After you have followed step 1,2,3 and 4, save this message (and copy so you can use it again).
Use your Internet browser and Outlook Express or another newsreader and try to find FORUMS, NEWSGROUPS,
BULLETIN BOARDS, DISCUSSION GROUPS, CHAT SITES and ONLINE COMMUNITIES. Use GOOGLE or use a NEWSERVER.
Use every option to post this message. Download PostXpert to send 1 message to more NEWSGROUPS at the
same time.

!!!!! REMEMBER !!!!! The more you post this message the more MONEY WILL FLOW IN.


Why does this Business program work so well !!!!!.

Lets asume that from the 200 (or more) messages that you have posted, only 5 people respond, you will have your
$6 back that you have invested. Those 5 people will each send at least 200 messages with your e-mailadres on
number 4. That's 6 x 6 x $1 = $36. The next 25 people will also send 200 messages with your adres on number 3. That's 36 x 6 x $1 = $216. The next 216 people also send 200 messages with your name on number 2. That's 216 x 6
x $1 = $1296!. Those 1296 people again also send 200 messages with your name on number 1. That will give us a total of 1296 x 6 x $1 = $7,776.

Now the last tier! 7776 x 6 x $1 = $46,656!!!!!!

This is only a EXAMPLE with 6 reactions. You WILL get MORE responses than that.

Remember that most newsservers will leave the posted messages on there servers for about 2 weeks. If you will post your message again, it WILL again start from the beginning. So you can repeat this over and over again.

Everyday MILLIONS of people are ONLINE and reading these messages, JUST LIKE YOU RIGHT NOW.
I also was sceptical in the beginning and have read a lot of these messages. I also thought that it was bullshit.
Until I thought : What the hell!, only $6. What's $6 and a couple of minutes of my time to solve my money problems.

!!!!! REMEMBER !!!!! Follow every step, and IT WILL WORK, TRUST ME. !!!!!



!!!!! BEST WISHES AND GOOD LUCK !!!!!








w)O>+Wink<9UVS;F>qaGL<Uq#v`V6(F]- rM;$g+!4IIQ*827?H4


pengdaimin
Guest

Thu Nov 09, 2006 7:31 pm   



You can use Cadence Signalstorm library characterization tool to create a
..lib file.Altough,you can use Mentor's tool Smart series tools about std
cell library.
wish this help!


Guest

Sun Sep 28, 2008 5:26 am   



Marion wrote:
Quote:

I specify another disabled elbow.


http://creep.bharattv.org

--
Otherwise the check in Atiqullah's thigh might intervene some depressed parades.

Linus Torwalds
Guest

Wed Apr 08, 2009 3:22 am   



www.LinuxCAD.com

LinuxCAD is today's leading computer aided design and drafting program
for The Linux Operating System.

LinuxCAD has grown in sales and functionality since its original
introduction in 1998.

LinuxCAD now represents a complete computer aided design program for
Linux ... it is a complete replacement for AutoCAD. For any practical
purpose, it implements all major features of AutoCAD in such a way that
experienced AutoCAD users do not need additional training to start
working with LinuxCAD.

Linux users who are new to CAD will find our Users Manual an easy way to
learn the CAD trade. There is so much similarity between LinuxCAD and
AutoCAD, that while learning LinuxCAD, you will simultaneously learn
AutoCAD.

With remarkable ease you will find yourself creating all kinds of
technical illustrations, diagrams, sketches and industrial quality drawings.

Suggested Uses: flowcharting,land surveying,mechanical drawing ,
architectural drafting, entity relationship diagramming ,software
engineering diagramming.


The demo version of LinuxCAD was addedd to

www.LinuxCAD.com

it is at the very bottom of the front page it says:


"download demo"

Linus Torwalds
Guest

Fri Apr 10, 2009 10:08 am   



LinuxCAD is today's leading computer aided design and drafting program for
The Linux Operating System.

LinuxCAD has grown in sales and functionality since its original
introduction in 1998.

LinuxCAD now represents a complete computer aided design program for
Linux ...
it is a complete replacement for AutoCAD. For any practical purpose,
it implements all major features of AutoCAD in such a way that experienced
AutoCAD users do not need additional training to start working with
LinuxCAD.

Linux users who are new to CAD will find our Users Manual an easy way to
learn the CAD trade. There is so much similarity between LinuxCAD and
AutoCAD,
that while learning LinuxCAD, you will simultaneously learn AutoCAD.

With remarkable ease you will find yourself creating all kinds of
technical illustrations, diagrams, sketches and industrial quality drawings.

Suggested Uses: flowcharting,land surveying,mechanical drawing ,
architectural drafting, entity relationship diagramming ,software
engineering diagramming.


This is a professional quality graphics modelling package for Linux !!!
A must have for every Linux user !!!
Implements all core features of AutoCAD in a very compatible way !!!
No learning curve for AutoCAD users !!!

you can contact me at 913 322 3766

or at cadsoftw_at_aol.com

or at 913 687 2263

to receive demo version of the software

Linus Torwalds


Guest

Sun Feb 17, 2013 7:48 am   



On Thursday, July 10, 1997 3:00:00 PM UTC+8, Kiran Nimmagadda wrote:
Quote:
hello everybody,

i am having some problem in using the jedi, nova and sred programs in
the sis suite of synthesis tools from uc,berkeley. the specific problem
i have is as shown in the transcript below -
-----------------------------------------------------------------------
[2]% sis
UC Berkeley, SIS Development Version (compiled 10-Sep-95 at 7:58 PM)
sis> read_kiss marchb.kiss
sis> state_assign jedi
Running jedi, written by Bill Lin, UC Berkeley
sh: jedi: not found
state assignment program returned non-zero exit status
jedi < /usr/tmp/SISBAAa11455 > /usr/tmp/SISCAAa11455
sis
------------------------------------------------------------------------
i have no clue as to what the problem is. the executables for jedi, nova
, sred and espresso are there in the same directory as sis. i am having
similar problems with nova and sred. but, espresso seems to work fine.
if anyone hs had similar problems before could u please point me towards
the right direction.

email replies are also most welcome to kirann_at_eecs.umich.edu

thanks a lot in advance.

regards,
kiran nimmagadda.

--
***********************************************************************
Kiran Nimmagadda kirann_at_umich.edu

First yr grad student, Horace H.Rackham school of graduate studies
GSRA, EECS Dept., University of Michigan @ Ann Arbor

Office : 3216 EECS Bldg., 1301 Beal Avenue, Ann Arbor, MI 48109
ph: (313) 763 0227
Home : 1851 Lake Lila Drive, Apt #9B6, Ann Arbor, MI 48105
ph: (313) 663 0290
***********************************************************************
GO BLUE
____ ____
[ \ / ]
] \/ [
| MICHIGAN |
] [\ /] [
[____]\/[____]

***********************************************************************

You should add the install directory to PATH variable.

Goto page Previous  1, 2, 3

elektroda.net NewsGroups Forum Index - Synthesis - Detailed Specification of IEEE802.11 MAC for Synthesis

Ask a question - edaboard.com

Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
RTV map EDAboard.com map News map EDAboard.eu map EDAboard.de map EDAboard.co.uk map