EDAboard.com | EDAboard.eu | EDAboard.de | EDAboard.co.uk | RTV forum PL | NewsGroups PL

Check my capacitor calculation

Ask a question - edaboard.com

elektroda.net NewsGroups Forum Index - Electronics Components - Check my capacitor calculation

sinebar
Guest

Mon Jan 10, 2011 9:47 pm   



I need to make a plate capacitor of 7nF 50KV. I will use aluminum
foil and 1.5mm thick polycarbonite insulator.
The area I came up with is 3.5 sqaure meters. Is that right?

Sjouke Burry
Guest

Mon Jan 10, 2011 10:18 pm   



sinebar wrote:
Quote:
I need to make a plate capacitor of 7nF 50KV. I will use aluminum
foil and 1.5mm thick polycarbonite insulator.
The area I came up with is 3.5 sqaure meters. Is that right?

Check out the link below for the epsilon value
Quote:
http://www.ami.ac.uk/courses/topics/0184_dp/index.html

Formula for capacitance:
> http://www.microwaves101.com/encyclopedia/capacitormath.cfm#parallel

John Ferrell
Guest

Tue Jan 11, 2011 5:15 pm   



On Mon, 10 Jan 2011 11:47:13 -0800 (PST), sinebar
<sinebar3770_at_gmail.com> wrote:

Quote:
I need to make a plate capacitor of 7nF 50KV. I will use aluminum
foil and 1.5mm thick polycarbonite insulator.
The area I came up with is 3.5 sqaure meters. Is that right?

I am certain it is not.

7nf is close to what you have with two pieces of wire twisted together
for about 5 inches.

John Ferrell W8CCW

Sjouke Burry
Guest

Tue Jan 11, 2011 5:37 pm   



John Ferrell wrote:
Quote:
On Mon, 10 Jan 2011 11:47:13 -0800 (PST), sinebar
sinebar3770_at_gmail.com> wrote:

I need to make a plate capacitor of 7nF 50KV. I will use aluminum
foil and 1.5mm thick polycarbonite insulator.
The area I came up with is 3.5 sqaure meters. Is that right?

I am certain it is not.

7nf is close to what you have with two pieces of wire twisted together
for about 5 inches.

John Ferrell W8CCW
I think you are talking about picofarads with the twisted wire

7 Nanofarad is 7000 picofarad.

Baron
Guest

Tue Jan 11, 2011 10:39 pm   



sinebar Inscribed thus:

Quote:
I need to make a plate capacitor of 7nF 50KV. I will use aluminum
foil and 1.5mm thick polycarbonite insulator.
The area I came up with is 3.5 sqaure meters. Is that right?

Do you mean 7 nanofarad or 7000 picofarad ?

--
Best Regards:
Baron.

Michael A. Terrell
Guest

Wed Jan 12, 2011 12:10 am   



Baron wrote:
Quote:

sinebar Inscribed thus:

I need to make a plate capacitor of 7nF 50KV. I will use aluminum
foil and 1.5mm thick polycarbonite insulator.
The area I came up with is 3.5 sqaure meters. Is that right?

Do you mean 7 nanofarad or 7000 picofarad ?


That must be some mighty thin insulation on that wire.


--
You can't fix stupid. You can't even put a band-aid on it, because it's
Teflon coated.

Spehro Pefhany
Guest

Wed Jan 12, 2011 4:38 am   



On Mon, 10 Jan 2011 11:47:13 -0800 (PST), the renowned sinebar
<sinebar3770_at_gmail.com> wrote:

Quote:
I need to make a plate capacitor of 7nF 50KV. I will use aluminum
foil and 1.5mm thick polycarbonite insulator.
The area I came up with is 3.5 sqaure meters. Is that right?

A = C * d / (k * e0)

= 7E-9 * 1.5E-3/(2.9 * 8.854E-12)

= ??

... maybe you put k in the numerator?


Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff_at_interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com

sinebar
Guest

Wed Jan 12, 2011 5:23 am   



On Jan 11, 3:39 pm, Baron <baron.nos...@linuxmaniac.nospam.net> wrote:
Quote:
sinebar Inscribed thus:

I need to make a plate capacitor of 7nF 50KV.  I will use aluminum
foil and 1.5mm thick polycarbonite insulator.
The area I came up with is 3.5 sqaure meters.  Is that right?

Do you mean 7 nanofarad or 7000 picofarad ?

--
Best Regards:
                     Baron.

Yes I mean 7 nanofarad.

John Ferrell
Guest

Wed Jan 12, 2011 5:07 pm   



On Tue, 11 Jan 2011 17:37:41 +0100, Sjouke Burry
<burrynulnulfour_at_ppllaanneett.nnll> wrote:

Quote:
John Ferrell wrote:
On Mon, 10 Jan 2011 11:47:13 -0800 (PST), sinebar
sinebar3770_at_gmail.com> wrote:

I need to make a plate capacitor of 7nF 50KV. I will use aluminum
foil and 1.5mm thick polycarbonite insulator.
The area I came up with is 3.5 sqaure meters. Is that right?

I am certain it is not.

7nf is close to what you have with two pieces of wire twisted together
for about 5 inches.

John Ferrell W8CCW
I think you are talking about picofarads with the twisted wire
7 Nanofarad is 7000 picofarad.
My error!

You are correct...
John Ferrell W8CCW

elektroda.net NewsGroups Forum Index - Electronics Components - Check my capacitor calculation

Ask a question - edaboard.com

Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
RTV map EDAboard.com map News map EDAboard.eu map EDAboard.de map EDAboard.co.uk map Opony